jump2(at)sbcglobal.net
Guest
|
 Posted: Mon Feb 21, 2011 4:37 am Post subject: flaps |
 |
|
I finally got around to fixing my flaps. I found it was in the Show planes flap positioning system. Apparently my jack screw rod end bearing could turn enough to wear on the micro switches. I took off the system from the jack screw and flaps work just fine so I called and sent the position system back to show planes and they went through it and replaced the micro switches and sent some counter sunk washers to put in and that seems to have fixed the problems.
--- On Tue, 1/11/11, Robert Brunkenhoefer <robertbrunk(at)me.com> wrote:
[quote]
From: Robert Brunkenhoefer <robertbrunk(at)me.com>
Subject: Re: flaps
To: "rv10-list(at)matronics.com" <rv10-list(at)matronics.com>
Date: Tuesday, January 11, 2011, 9:56 PM
I have flaps that do not go all the way up after reaching 1st flap position whwe they have been down while in flight and on the ground. 350+hrs.
Robert Brunkenhoefer
Sent from my Apple iPad
On Jan 11, 2011, at 6:48 PM, DLM <dlm34077(at)q.com> wrote:
[quote] Mine have 370 hours with no problem; I do not use the flap positioning system.
[quote] ---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
