Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Head protection

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List
View previous topic :: View next topic  
Author Message
occom



Joined: 26 Aug 2006
Posts: 404

PostPosted: Sun Mar 06, 2011 1:49 pm    Post subject: Head protection Reply with quote

There were three Kitfox aircraft here locally that I am aware of. There may
be (probably) a couple I am unfamiliar with so far. One (sister to mine) met
with an approach stall I think (it had a very heavy Subaru engine in it)
Details are sketchy because the pilot has no memory of the incident. One
other was destroyed after many hours in a bad float landing, totally pilot
error. The reason I bring these incidents up is that in both cases the pilot
hit their heads quite badly on the cabin structure. This is no criticism,
both pilots survived and one had only minor injury, a major plus for
Kitfoxes IMHO.

The reason I bring it up is to ask if others have padded the tubes above our
heads or if they wear a helmet. I am somewhat tempted to the latter as I
have very little hair and a helmet would provide protection from sun as well
as impact. Anyway, I was thinking about it and watching videos of papilot's
vw Kitfox on YouTube, noticed the pads and got to wondering what others have
done.

Those tubes probably hurt like the dickens and they aren't that far off my
noggin.


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List
Back to top
View user's profile Send private message
Mnflyer



Joined: 15 May 2006
Posts: 78

PostPosted: Sun Mar 06, 2011 4:02 pm    Post subject: Re: Head protection Reply with quote

A proper fitting and secured helmet is excellent protection, a proven safety devise, the padding of the tubes will only help with bumping your head while getting in or out the the plane will provide no real protection in the event of a accident. A helmet must fit properly a chin strap and a neck nape strap are needed for full benefits.

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
GB
MNFlyer
Flying a HKS Kitfox III
Back to top
View user's profile Send private message
Lynn Matteson



Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

PostPosted: Sun Mar 06, 2011 7:34 pm    Post subject: Head protection Reply with quote

One of my test pilots also bumped his head in mine so he suggested
padding, which I did, and just never removed it.

Lynn Matteson
Kitfox IV Speedster, taildragger
Jabiru 2200, #2062
Prince prop (64 x 30, P-tip)
Electroair direct-fire ignition system
Rotec TBI-40 injection (sleeved to 35mm)
Status: flying...1083 hrs (since 3-27-2006)

On Mar 6, 2011, at 4:45 PM, Dave wrote:

Quote:


There were three Kitfox aircraft here locally that I am aware of.
There may
be (probably) a couple I am unfamiliar with so far. One (sister to
mine) met
with an approach stall I think (it had a very heavy Subaru engine
in it)
Details are sketchy because the pilot has no memory of the
incident. One
other was destroyed after many hours in a bad float landing,
totally pilot
error. The reason I bring these incidents up is that in both cases
the pilot
hit their heads quite badly on the cabin structure. This is no
criticism,
both pilots survived and one had only minor injury, a major plus for
Kitfoxes IMHO.

The reason I bring it up is to ask if others have padded the tubes
above our
heads or if they wear a helmet. I am somewhat tempted to the latter
as I
have very little hair and a helmet would provide protection from
sun as well
as impact. Anyway, I was thinking about it and watching videos of
papilot's
vw Kitfox on YouTube, noticed the pads and got to wondering what
others have
done.

Those tubes probably hurt like the dickens and they aren't that far
off my
noggin.



- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM
Back to top
View user's profile Send private message Send e-mail
PMorel



Joined: 09 Jul 2007
Posts: 62
Location: Locust Grove, GA USA

PostPosted: Mon Mar 07, 2011 4:45 am    Post subject: Re: Head protection Reply with quote

This has been a concern of mine too. I went down to my local Home Depot and purchased pipe insulation for tube padding. Works just fine.

- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List



tube insulation.jpg
 Description:
 Filesize:  89.86 KB
 Viewed:  4822 Time(s)

tube insulation.jpg



_________________
Paul Morel
912 Speedster
Locust Grove, GA

www.WingsAirPhotos.com
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Guy Buchanan



Joined: 16 Jul 2006
Posts: 1204
Location: Ramona, CA

PostPosted: Mon Mar 07, 2011 9:36 am    Post subject: Head protection Reply with quote

On 3/6/2011 1:45 PM, Dave wrote:
Quote:
The reason I bring it up is to ask if others have padded the tubes above our
heads or if they wear a helmet.
Oh yes. I covered the tubes to the side and rear with foam tube

insulation. I've used them many a time, as I fly in any turbulence. The
hard one to protect is the perfectly vertical -1 g bump that raps your
headset band smartly into the skylight. I once saw a Kitfox skylight hit
so hard this way it popped the fasteners along one side and back edge.
I'm getting shorter with age though so maybe this won't be a problem in
the future. Wink

Guy Buchanan
Ramona, CA
Kitfox IV-1200 / 592-C / Warp 3cs / 500 hrs. and grounded


- The Matronics Kitfox-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Guy Buchanan
Deceased K-IV 1200
A glider pilot too.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kitfox-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group