Matronics Email Lists :: View topic - RV-8 replacement pedals

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

RV-8 replacement pedals

Matronics Email Lists Forum Index -> RV8-List

View previous topic :: View next topic

Author Message

endspeed(at)yahoo.com
Guest

Posted: Thu Mar 10, 2011 4:01 pm Post subject: RV-8 replacement pedals

Buzz owns Cleaveland Tools and is a real good guy.



Sent from my iPhone



On Mar 10, 2011, at 18:22, Robin Marks <Robin(at)PaintTheWeb.com (Robin(at)PaintTheWeb.com)> wrote:



[quote]

I found the same thing and was hoping for another lead on upgraded 8 pedals. 

Â 

Robin 

Do Not Archive

Â  

From: [url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url] [mailto:[url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url]] On Behalf Of William Slaughter

 Sent: Thursday, March 10, 2011 3:11 PM

To: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]

Subject: RE: RV-8a Engraving

Â  

The custom pedals currently listed on the Cleaveland website are for the side-by-side RVs only. 

Â 

William 

Â 

 From: [url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url] [mailto:[url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url]] On Behalf Of Robert Sultzbach

 Sent: Thursday, March 10, 2011 2:13 PM

To: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]

Subject: Re: RV-8a Engraving

Â  

Cleaveland Tools has a custom set.



Sent from my iPhone

On Mar 10, 2011, at 14:22, [url=mailto:cs(at)charlesstringham.com]cs(at)charlesstringham.com (cs(at)charlesstringham.com)[/url] wrote: 

 	  Quote: 	
		  

Does anyone know of aftermarket rudder pedals for the RV-8? I recall seeing a really cool looking set at Oshkosh a couple of years ago, but can't recall the vendor. 

 

Thanks, Chet Stringham 

Sent from my Verizon Wireless BlackBerry



From: Robin Marks <[url=mailto:Robin(at)PaintTheWeb.com]Robin(at)PaintTheWeb.com (Robin(at)PaintTheWeb.com)[/url]>  



Sender: [url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url] 



Date: Thu, 10 Mar 2011 08:46:33 -0800 



To: <[url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]>



ReplyTo: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]  



Subject: RE: RV-8a Engraving



Â 



I agree sort of=85 I = have had a lot of engraving done by this group with generally good results.= However my last experience was about a 4 month ordeal where items were mix= ed up and my order was split so that a couple of items were set aside and g= ot separated from my order. Then a number of switches were engraved in diff= erent size fonts so they look kind of odd next to each other. Then 5 weeks = later my carbon fiber safety switch covers had not shown up so I called and= they didn=92t know this covers were mine. That took another 4 weeks to com= plete (two covers). So ultimately 3 shipments charged at more than market v= alue for my one order.  

Something may have changed over there becaus= e I felt the need to stay on top of them after 6 weeks went by with no acti= vity.

=A0

Robin

 Do Not Archive 

=A0

From: server(at)matronics.com (server(at)matronics.com) [mailto:[url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url]] On Behalf Of = FLYBOY.BOB

 Sent: Thursday, March 10, 2011 7:31 AM

To: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]

Subject: Re= : RV-8a Engraving

= =A0 

I us= ed a place called Aircraft Engraver in Granby, CT [url=3D%22http:/www.eng=]http://www.engravers.net/a=[/url] ircraft/fp_list.htm they did a great j= ob, promptly, at a fair price.=A0 They also do fuel caps and placards. 



=A0

Regards,



Bob Chri= stensen =96 N83RC =96 waiting for the inspector!

 

=A0



From: japhilli= [url=mailto:psga(at)aol.com]psga(at)aol.com (psga(at)aol.com)[/url] 



 Sent: Wednesday, March= 09, 2011 9:53 AM



To: [url=3D%22mailto:=]rv8-list(at)matronics= .com[/url] 



 Subject: RV-= 8a Engraving



=A0



<= /div> 

=A0

Dear Builder Buds, no the list = is not dead. Some of us are just too damned busy building to write about it= . I had some engraving done yesterday and I wanted to share it with you all= . Sorry for the photos blur. I think the product is great, service was supe= rb and friendly and price was 30% less than Bill's Engraving that Matt = D. used. The fellow that runs the place is Mr. Joe, nice guy who says he sp= ent his airforce time hanging bombs and rockets on F4s in V mam. Great guy!= You can see his card/ letter head in one of the photos. I was impressed by= the work and recommend his shop. He can also do self stick vinyl letters, = numbers and words for cockpit markings. Best regards, Bill of Georgia 



 	  Quote: 	
		  =A0==A0 	


RV8-List Email Forum - 	  Quote: 	
		  =st Un/Subscription, 	


Day Browse, Chat, FAQ, 	  Quote: 	
		  =w.matronics.com/Navigator?RV8-List">http://www.matronics.com/Navigator?RV8-=b>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<==A0=A0=A0=A0=A0 - MATRONICS WEB FORUMS - 	


m">http://forums.matronics.com 

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 -Matt Dralle, List A= ; http://www.matronics.co= m/contribution =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D  	  Quote: 	
		  =A0=A0 	
0 	  Quote: 	
		  =A0 	
1  	  Quote: 	
		  =A0 	
2

Â¦Â·â€º~â€°ÃÂ²,ÃžÃ™ÃŠ%Â¢Â½4Ã“M4}Â§â€‘râ€¹Â«â€°ÃªÃ§{(ÂºÂ¸Å¾

=A0 	
3  	  Quote: 	
		  =A0 	
4 	  Quote: 	
		  =A0 	
5 	  Quote: 	
		  =A0 	
6  	  Quote: 	
		  =A0 	
7 	  Quote: 	
		  =A0 	
8 	  Quote: 	
		  =A0 	
9 	  Quote: 	
		  = 	
0  	  Quote: 	
		  = 	
1 	  Quote: 	
		  = 	
2 	  Quote: 	
		  = 	
3 	  Quote: 	
		  = 	
4 ======================= = Archive Search & Download, 7-Day Browse, Chat, FAQ, 	  Quote: 	
		  = 	
5 ================= 	  Quote: 	
		  = 	
6 -> http://forums.matronics.com ================= 	  Quote: 	
		  = 	
7 Â Â Â  Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â -Matt Dralle, List Admin. 	  Quote: 	
		  = 	
8 ======================= 	  Quote: 	
		  = 	
9

   	  Quote: 	
		  st Un/Subscription, 	
0

[b]

- The Matronics RV8-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

endspeed(at)yahoo.com
Guest

Posted: Thu Mar 10, 2011 4:01 pm Post subject: RV-8 replacement pedals

If you request Buzz Lauritsen to make them for the 8 I would bet he would accommodate you.



Sent from my iPhone



On Mar 10, 2011, at 18:22, Robin Marks <Robin(at)PaintTheWeb.com (Robin(at)PaintTheWeb.com)> wrote:



[quote]

I found the same thing and was hoping for another lead on upgraded 8 pedals. 

Â 

Robin 

Do Not Archive

Â  

From: [url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url] [mailto:[url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url]] On Behalf Of William Slaughter

 Sent: Thursday, March 10, 2011 3:11 PM

To: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]

Subject: RE: RV-8a Engraving

Â  

The custom pedals currently listed on the Cleaveland website are for the side-by-side RVs only. 

Â 

William 

Â 

 From: [url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url] [mailto:[url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url]] On Behalf Of Robert Sultzbach

 Sent: Thursday, March 10, 2011 2:13 PM

To: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]

Subject: Re: RV-8a Engraving

Â  

Cleaveland Tools has a custom set.



Sent from my iPhone

On Mar 10, 2011, at 14:22, [url=mailto:cs(at)charlesstringham.com]cs(at)charlesstringham.com (cs(at)charlesstringham.com)[/url] wrote: 

 	  Quote: 	
		  

Does anyone know of aftermarket rudder pedals for the RV-8? I recall seeing a really cool looking set at Oshkosh a couple of years ago, but can't recall the vendor. 

 

Thanks, Chet Stringham 

Sent from my Verizon Wireless BlackBerry



From: Robin Marks <[url=mailto:Robin(at)PaintTheWeb.com]Robin(at)PaintTheWeb.com (Robin(at)PaintTheWeb.com)[/url]>  



Sender: [url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url] 



Date: Thu, 10 Mar 2011 08:46:33 -0800 



To: <[url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]>



ReplyTo: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]  



Subject: RE: RV-8a Engraving



Â 



I agree sort of=85 I = have had a lot of engraving done by this group with generally good results.= However my last experience was about a 4 month ordeal where items were mix= ed up and my order was split so that a couple of items were set aside and g= ot separated from my order. Then a number of switches were engraved in diff= erent size fonts so they look kind of odd next to each other. Then 5 weeks = later my carbon fiber safety switch covers had not shown up so I called and= they didn=92t know this covers were mine. That took another 4 weeks to com= plete (two covers). So ultimately 3 shipments charged at more than market v= alue for my one order.  

Something may have changed over there becaus= e I felt the need to stay on top of them after 6 weeks went by with no acti= vity.

=A0

Robin

 Do Not Archive 

=A0

From: server(at)matronics.com (server(at)matronics.com) [mailto:[url=mailto:owner-rv8-list-server(at)matronics.com]owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)[/url]] On Behalf Of = FLYBOY.BOB

 Sent: Thursday, March 10, 2011 7:31 AM

To: [url=mailto:rv8-list(at)matronics.com]rv8-list(at)matronics.com (rv8-list(at)matronics.com)[/url]

Subject: Re= : RV-8a Engraving

= =A0 

I us= ed a place called Aircraft Engraver in Granby, CT [url=3D%22http:/www.eng=]http://www.engravers.net/a=[/url] ircraft/fp_list.htm they did a great j= ob, promptly, at a fair price.=A0 They also do fuel caps and placards. 



=A0

Regards,



Bob Chri= stensen =96 N83RC =96 waiting for the inspector!

 

=A0



From: japhilli= [url=mailto:psga(at)aol.com]psga(at)aol.com (psga(at)aol.com)[/url] 



 Sent: Wednesday, March= 09, 2011 9:53 AM



To: [url=3D%22mailto:=]rv8-list(at)matronics= .com[/url] 



 Subject: RV-= 8a Engraving



=A0



<= /div> 

=A0

Dear Builder Buds, no the list = is not dead. Some of us are just too damned busy building to write about it= . I had some engraving done yesterday and I wanted to share it with you all= . Sorry for the photos blur. I think the product is great, service was supe= rb and friendly and price was 30% less than Bill's Engraving that Matt = D. used. The fellow that runs the place is Mr. Joe, nice guy who says he sp= ent his airforce time hanging bombs and rockets on F4s in V mam. Great guy!= You can see his card/ letter head in one of the photos. I was impressed by= the work and recommend his shop. He can also do self stick vinyl letters, = numbers and words for cockpit markings. Best regards, Bill of Georgia 



 	  Quote: 	
		  =A0==A0 	


RV8-List Email Forum - 	  Quote: 	
		  =st Un/Subscription, 	


Day Browse, Chat, FAQ, 	  Quote: 	
		  =w.matronics.com/Navigator?RV8-List">http://www.matronics.com/Navigator?RV8-=b>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<==A0=A0=A0=A0=A0 - MATRONICS WEB FORUMS - 	


m">http://forums.matronics.com 

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 -Matt Dralle, List A= ; http://www.matronics.co= m/contribution =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D  	  Quote: 	
		  =A0=A0 	
0 	  Quote: 	
		  =A0 	
1  	  Quote: 	
		  =A0 	
2

Â¦Â·â€º~â€°ÃÂ²,ÃžÃ™ÃŠ%Â¢Â½4Ã“M4}Â§â€‘râ€¹Â«â€°ÃªÃ§{(ÂºÂ¸Å¾

=A0 	
3  	  Quote: 	
		  =A0 	
4 	  Quote: 	
		  =A0 	
5 	  Quote: 	
		  =A0 	
6  	  Quote: 	
		  =A0 	
7 	  Quote: 	
		  =A0 	
8 	  Quote: 	
		  =A0 	
9 	  Quote: 	
		  = 	
0  	  Quote: 	
		  = 	
1 	  Quote: 	
		  = 	
2 	  Quote: 	
		  = 	
3 	  Quote: 	
		  = 	
4 ======================= = Archive Search & Download, 7-Day Browse, Chat, FAQ, 	  Quote: 	
		  = 	
5 ================= 	  Quote: 	
		  = 	
6 -> http://forums.matronics.com ================= 	  Quote: 	
		  = 	
7 Â Â Â  Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â -Matt Dralle, List Admin. 	  Quote: 	
		  = 	
8 ======================= 	  Quote: 	
		  = 	
9

   	  Quote: 	
		  st Un/Subscription, 	
0

[b]

- The Matronics RV8-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

Jesse Laub

Joined: 24 Oct 2008
Posts: 5

Posted: Thu Mar 10, 2011 4:24 pm Post subject: RV-8 replacement pedals

I don't think this is what you guys are looking for, but I do have a     Rear Seat Rudder Pedal kit from Vans in new condition (did open the     plastic bag) for an RV 8A $150 + shipping.  Contact me in Oregon,     541-563-4475 or email me if you know of any interest.

     

     Jesse Laub.....sold project & movin' on

     Do Not Archive

     On 3/10/2011 3:22 PM, Robin Marks wrote:     [quote]                                     

I found the same thing and was hoping for another             lead on upgraded 8 pedals.         

          

Robin         

Do Not Archive         

                                  

From: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)                 [mailto:owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)]                 On Behalf Of William Slaughter

                 Sent: Thursday, March 10, 2011 3:11 PM

                 To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)

                 Subject: RE: RV-8a Engraving           

         

         

          

The custom pedals currently listed on the             Cleaveland website are for the side-by-side RVs only.         

          

William         

                                  

               From: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)                 [mailto:owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)]                 On Behalf Of Robert Sultzbach

                 Sent: Thursday, March 10, 2011 2:13 PM

                 To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)

                 Subject: Re: RV-8a Engraving           

         

         

                     

Cleaveland Tools has a custom set.

             

             Sent from my iPhone         

                    



             On Mar 10, 2011, at 14:22, cs(at)charlesstringham.com (cs(at)charlesstringham.com)             wrote:         

          	  Quote: 	
		                          

Does anyone know of aftermarket rudder               pedals for the RV-8? I recall seeing a really cool looking               set at Oshkosh a couple of years ago, but can't recall the               vendor. 

               

               Thanks, Chet Stringham              

Sent from my Verizon Wireless BlackBerry                            

                            

From: Robin Marks <Robin(at)PaintTheWeb.com (Robin(at)PaintTheWeb.com)>                            

                            

Sender: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)                            

                            

Date: Thu, 10 Mar 2011                 08:46:33 -0800             

                            

To: <rv8-list(at)matronics.com (rv8-list(at)matronics.com)>             

                            

ReplyTo: rv8-list(at)matronics.com (rv8-list(at)matronics.com)                            

                            

Subject: RE: RV-8a                 Engraving             

                            

              

                            

I agree sort of=85 I = have had a                 lot of engraving done by this group with generally good                 results.= However my last experience was about a 4 month                 ordeal where items were mix= ed up and my order was                 split so that a couple of items were set aside and g= ot                 separated from my order. Then a number of switches were                 engraved in diff= erent size fonts so they look kind of                 odd next to each other. Then 5 weeks = later my carbon                 fiber safety switch covers had not shown up so I called                 and= they didn=92t know this covers were mine. That took                 another 4 weeks to com= plete (two covers). So                 ultimately 3 shipments charged at more than market v=                 alue for my one order.                

Something may have changed over                 there becaus= e I felt the need to stay on top of them                 after 6 weeks went by with no acti= vity.               

=A0               

Robin               

                 Do Not Archive                

=A0                                                   

From: owner-rv8-list-server(at)matronics.com (owner-rv8-list-server(at)matronics.com)]                     On Behalf Of = FLYBOY.BOB

                     Sent: Thursday, March 10, 2011 7:31 AM

                     To: rv8-list(at)matronics.com (rv8-list(at)matronics.com)

                     Subject: Re= : RV-8a Engraving                 

               

               

= =A0                                                                        

I us= ed a place                         called Aircraft Engraver in Granby, CT [url=3D%22http:/www.eng=]http://www.engravers.net/a=                           ircraft/fp_list.htm[/url] they did a great j=                         ob, promptly, at a fair price.=A0 They also do                         fuel caps and placards.                   

                                        

=A0                                            

Regards,                     

                                            

Bob Chri= stensen                           =96 N83RC =96 waiting for the inspector!                     

                                                                                                

=A0                         

                                                                                 

From:                               japhilli= psga(at)aol.com (psga(at)aol.com)                                                        

                                                        

                               Sent: Wednesday, March= 09, 2011                               9:53 AM                           

                                                        

To: [url=3D%22mailto:=]rv8-list(at)matronics=                                 .com[/url]                            

                                                        

                               Subject: RV-= 8a                               Engraving                           

                         

                       

                                                

=A0                       

                       

<= /div>                                                                                                        

=A0                                                            

Dear                                 Builder Buds, no the list = is not dead.                                 Some of us are just too damned busy                                 building to write about it= . I had some                                 engraving done yesterday and I wanted to                                 share it with you all= . Sorry for the                                 photos blur. I think the product is                                 great, service was supe= rb and friendly                                 and price was 30% less than Bill's                                 Engraving that Matt = D. used. The                                 fellow that runs the place is Mr. Joe,                                 nice guy who says he sp= ent his                                 airforce time hanging bombs and rockets                                 on F4s in V mam. Great guy!= You can see                                 his card/ letter head in one of the                                 photos. I was impressed by= the work and                                 recommend his shop. He can also do self                                 stick vinyl letters, = numbers and words                                 for cockpit markings. Best regards, Bill                                 of Georgia                             

                           

                         

                       

                     

                   

                    	  Quote: 	
		  =A0==A0 	
                   

RV8-List Email Forum -                    	  Quote: 	
		  =st Un/Subscription, 	
                   

Day Browse, Chat, FAQ,                    	  Quote: 	
		  =w.matronics.com/Navigator?RV8-List">http://www.matronics.com/Navigator?RV8-=b>=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<==A0=A0=A0=A0=A0 - MATRONICS WEB FORUMS - 	
                   

m">http://forums.matronics.com                   

=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0                     -Matt Dralle, List A= ; http://www.matronics.co=                     m/contribution                     =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D                    	  Quote: 	
		  =A0=A0 	
0                  	  Quote: 	
		  =A0 	
1                  	  Quote: 	
		  =A0 	
2                 

¦·›~‰í²,ÞÙÊ%¢½4ÓM4}§‑r‹«‰êç{(º¸ž               

             

           

         =A0 	
3          	  Quote: 	
		  =A0 	
4          	  Quote: 	
		  =A0 	
5          	  Quote: 	
		  =A0 	
6          	  Quote: 	
		  =A0 	
7          	  Quote: 	
		  =A0 	
8          	  Quote: 	
		  =A0 	
9          	  Quote: 	
		  = 	
0          	  Quote: 	
		  = 	
1          	  Quote: 	
		  = 	
2          	  Quote: 	
		  = 	
3          	  Quote: 	
		  = 	
4         =======================         = Archive Search & Download, 7-Day Browse, Chat, FAQ,          	  Quote: 	
		  = 	
5         =================          	  Quote: 	
		  = 	
6         -> http://forums.matronics.com         =================          	  Quote: 	
		  = 	
7                                      -Matt Dralle, List Admin.          	  Quote: 	
		  = 	
8         =======================          	  Quote: 	
		  = 	
9       

        	  Quote: 	
		  st Un/Subscription, 	
0     [b]

- The Matronics RV8-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV8-List

Display posts from previous:

	Matronics Email Lists Forum Index -> RV8-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum