Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

O-540

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List
View previous topic :: View next topic  
Author Message
n520tx(at)gmail.com
Guest





PostPosted: Mon Mar 21, 2011 5:11 am    Post subject: O-540 Reply with quote

Question about the engine mount that comes with the finish kit.

The engine mount ears on the O-540 can be one of two part numbers:

70456
12A19770

It appears that the difference is the size of the engine mount bolt thru
holes in them. The 70456 part is for all O-540 models *except* A1A5 and
A1D5, those two use the other part.

Will either of these work with the finish kit ? Is it just a matter of
using a different size bolt with different engine/cushion/isolator
mounts ? Or is this going to be a problem with the actual engine mount
provided with the vans finish kit ?

Thanks

Ron


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Rhonda(at)bpaengines.com
Guest





PostPosted: Mon Mar 21, 2011 5:37 am    Post subject: O-540 Reply with quote

The RV-10 mount requires the small hole mounts. If you are ordering a
new engine, then yours will have the small mounts. If you are using a
rebuilt engine or a mid-time engine, there is a chance that it could
come with the large hole mounts. I think some of the -C4B5 engines on
Aztecs used the large mounts. You can pick up the small hole mounts used
serviceable (just make sure they are inspected) or new surplus.

Rhonda

--


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
kdbelue(at)charter.net
Guest





PostPosted: Mon Mar 21, 2011 5:37 am    Post subject: O-540 Reply with quote

No, I tried making the large-hole mounts work- they won't because they have a different dynafocal angle. Use the small hole mounts (70456) and hardware as Van's uses and save time/ money.

Sent from my iPhone

On Mar 21, 2011, at 8:08 AM, Ronald Walker <n520tx(at)gmail.com> wrote:

Quote:


Question about the engine mount that comes with the finish kit.

The engine mount ears on the O-540 can be one of two part numbers:

70456
12A19770

It appears that the difference is the size of the engine mount bolt thru
holes in them. The 70456 part is for all O-540 models *except* A1A5 and
A1D5, those two use the other part.

Will either of these work with the finish kit ? Is it just a matter of
using a different size bolt with different engine/cushion/isolator
mounts ? Or is this going to be a problem with the actual engine mount
provided with the vans finish kit ?

Thanks

Ron







- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
n520tx(at)gmail.com
Guest





PostPosted: Mon Mar 21, 2011 7:36 am    Post subject: O-540 Reply with quote

On Mon, 2011-03-21 at 08:26 -0500, Kevin Belue wrote:
Quote:
Use the small hole mounts (70456)

Thanks Kevin and Rhonda -- My confusion stemmed from the O-540 parts
catalog saying that the A1D5 has the 12A19770 mounts - that's the model
number that is stamped on my engine plate. (From an Aztec.)

The good news is that the part number that I just read off of the ears
is 70456.

No action required on my part.

Build on.

-Ron


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
davidsoutpost(at)comcast.
Guest





PostPosted: Mon Mar 21, 2011 8:49 am    Post subject: O-540 Reply with quote

Aero instock carries nice new machined mounts also. Reasonably priced. http://www.aeroinstock.com/products/APS-70456/6202/47458/product_detail/index.html

David Clifford

RV-10 Builder
Howell, MI
---


- The Matronics RV10-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV10-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV10-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group