Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Wood Fairings

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

rawheels

Joined: 09 Jul 2008
Posts: 89
Location: Westfield, IN

Posted: Wed Mar 30, 2011 8:59 am Post subject: Wood Fairings

WurleyBird's recent post on the PVC wing struts has got me looking into finally streamlining the bush gear that I installed a while ago. Is anyone cutting the wooden streamline strips, or happen to have some extra left over from their project by chance?

Av8r3400

Joined: 22 Sep 2008
Posts: 83
Location: North Central Wisconsin (KRRL)

Posted: Thu Mar 31, 2011 4:27 am Post subject: Re: Wood Fairings

Brett at Airdale has this wood faring material on hand.

http://www.airdale.com/

_________________
Thanks,
Av8r3400

Kitfox Model IV-1200 W/912UL & IVO
Kitfox Model IV-1050 W/912UL & Warp
YouTube Videos

Dick Maddux

Joined: 24 Jun 2008
Posts: 516
Location: Milton, Fl

Posted: Thu Mar 31, 2011 4:35 am Post subject: Wood Fairings

Rawheels,

  You could do this for your bush gear.

                                               Dick Maddux

                                               Fox 4

                                              Milton,Fl

Kitfox_059.jpg

Description:

Filesize:

374.04 KB

Viewed:

10332 Time(s)

rawheels

Joined: 09 Jul 2008
Posts: 89
Location: Westfield, IN

Posted: Thu Mar 31, 2011 7:38 am Post subject: Re: Wood Fairings

Dick,



I have always just planned on using wood & fabric like my original gear, so I didn't go for the fairing option on the Highwing, LLC gear.  That means I don't have the welded tabs.  I could ask Lowell if there is another way to attach their fairings.  Sure do like their workmanship.  Although, I'd still be looking at trying to streamline a portion of the spring tube that doesn't get covered by their fairing.

lcfitt(at)sbcglobal.net
Guest

Posted: Thu Mar 31, 2011 9:40 am Post subject: Wood Fairings

The formed fairings need the tabs.  The original idea for these fairings was 

something that was fairly easily replaceable in the event of damage as they 

are right below the doors.  Wood and fabric is what I had on my original 

bungee gear and it seemed to work fine.



Lowell

--------------------------------------------------

From: "rawheels" <rawheels(at)yahoo.com>

Sent: Thursday, March 31, 2011 8:38 AM

To: <kitfox-list(at)matronics.com>

Subject: Re: Wood Fairings



 	  Quote: 	
		   



 Dick,



 I have always just planned on using wood & fabric like my original gear, 

 so I didn't go for the fairing option on the Highwing, LLC gear.  That 

 means I don't have the welded tabs.  I could ask Lowell if there is 

 another way to attach their fairings.  Sure do like their workmanship. 

 Although, I'd still be looking at trying to streamline a portion of the 

 spring tube that doesn't get covered by their fairing.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=335581#335581

kerrjohna(at)comcast.net
Guest

Posted: Thu Mar 31, 2011 9:43 am Post subject: Wood Fairings

MIght be a little heavier, but is easy to work with, but I am pleased with the result of PVC lift strut fairings from Kitfox LLC.  Snaps on, holds position with LTV and can be covered/painted, etc. 

  

John Kerr

---

rawheels

Joined: 09 Jul 2008
Posts: 89
Location: Westfield, IN

Posted: Sat Apr 16, 2011 7:11 am Post subject: Re: Wood Fairings

Just wanted to give a quick user report.

 

Airdale does carry the wood streamlined strips (at) $2/ft.  Brett was very easy to work with, and the test pieces I ordered were delivered quickly.

 

I've attached some photos of the product.  There are a few observations that probably need to be pointed out about them if someone else is looking at ordering some for their project.

 

1.  As shown in the photos, the shape of the pieces aren't really "streamlined"; your buying a 1x2 with a couple of angled table saw cuts and a pass across a router.  So, don't expect a lot for the low price.

 

2.  The piece feels pretty heavy (at) 1.2 lbs for a 3' section (I'm assuming it is pine).  This might hold up better on the back edge of my landing gear, but that could add up if you were doing struts.  With Balsa (at) ~$18 for a 2x4x36 board from ACS, you could make some lighter ones for about the same price if you have the tools already.

 

3.  The strips will make the tubes more streamlined, but they fall short of the desired 4:1 teardrop shape.  When attached to a 1" tube the overall length is a little shorter than 2.75".  That is about the same size as on my old landing gear, and will work for my purpose, but may not be desirable for others.



Ryan

IMG00072-20110415-1025.jpg

Description:

Filesize:

20.85 KB

Viewed:

10207 Time(s)

IMG00070-20110415-1024.jpg

Description:

Filesize:

27.65 KB

Viewed:

10207 Time(s)

IMG00069-20110415-1024.jpg

Description:

Filesize:

36.84 KB

Viewed:

10207 Time(s)

_________________
Kitfox IV-1200
Indianapolis, IN

Pat Reilly

Joined: 06 Aug 2009
Posts: 345

Posted: Sat Apr 16, 2011 7:34 am Post subject: Wood Fairings

Kitfoxers, Try western red cedar, It's lighter than pine (not balsa wood light), readily available in tapered cross section as beveled cedar siding, easy to machine, and reasonably priced. If you haven't got a table or bench saw and hand plane to finish it up, you probably belong in a certified airplane. 

   

 Pat Reilly

 Mod 3 582 Rebuild

 Rockford, IL

 On Sat, Apr 16, 2011 at 10:11 AM, rawheels <rawheels(at)yahoo.com (rawheels(at)yahoo.com)> wrote:

  	  Quote: 	
		  --> Kitfox-List message posted by: "rawheels" <rawheels(at)yahoo.com (rawheels(at)yahoo.com)>

 

Just wanted to give a quick user report.



Airdale does carry the wood streamlined strips (at) $2/ft.  Brett was very easy to work with, and the test pieces I ordered were delivered quickly.



I've attached some photos of the product.  There are a few observations that probably need to be pointed out about them if someone else is looking at ordering some for their project.

 

1.  As shown in the photos, the shape of the pieces aren't really "streamlined"; your buying a 1x2 with a couple of angled table saw cuts and a pass across a router.  So, don't expect a lot for the low price.

 

2.  The piece feels pretty heavy (at) 1.2 lbs for a 3' section (I'm assuming it is pine).  This might hold up better on the back edge of my landing gear, but that could add up if you were doing struts.  With Balsa (at) ~$18 for a 2x4x36 board from ACS, you could make some lighter ones for about the same price if you have the tools already.

 

3.  The strips will make the tubes more streamlined, but they fall short of the desired 4:1 teardrop shape.  When attached to a 1" tube the overall length is a little shorter than 2.75".  That is about the same size as on my old landing gear, and will work for my purpose, but may not be desirable for others.

 

Ryan



--------

Ryan Wheeler

Kitfox IV-1200

Indianapolis, IN





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=337130#337130

 



Attachments:



http://forums.matronics.com//files/img00072_20110415_1025_210.jpg

http://forums.matronics.com//files/img00070_20110415_1024_206.jpg

 http://forums.matronics.com//files/img00069_20110415_1=======================

 y Browse, Chat, FAQ,

 ="http://www.matronics.com/Navigator?Kitfox-List" target="_blank">http:=====

  http://forums.mle, List Admin.

 =====



	




 

-- 

Pat Reilly

Mod 3 582 Rebuild

Rockford,IL

  [quote][b]

7suds(at)Chartermi.net
Guest

Posted: Sat Apr 16, 2011 10:37 am Post subject: Wood Fairings

Guys,

I looked at streamlining my horizontal stab and wing jury struts with balsa and ordered some from National Balsa,  link below. Have the plastic on my wing struts and left it there for now. I have not done anything with the balsa I bought yet, moved my focus to getting the plane in the air first. My thought was to glue and contour then cover with single layer carbon fiber or fiberglass. 

 

Lloyd C

Northern Mi.

KF 5 912ul IVO IFA

 

http://www.specializedbalsa.com/products2/lead_trail_aileron.php#TE

 

http://www.nationalbalsa.com/Balsa_Trailing_Edge_s/62.htm

 

 

From: owner-kitfox-list-server(at)matronics.com [mailto:owner-kitfox-list-server(at)matronics.com] On Behalf Of Patrick Reilly

Sent: Saturday, April 16, 2011 10:27 AM

To: kitfox-list(at)matronics.com

Subject: Re: Re: Wood Fairings

 

Kitfoxers, Try western red cedar, It's lighter than pine (not balsa wood light), readily available in tapered cross section as beveled cedar siding, easy to machine, and reasonably priced. If you haven't got a table or bench saw and hand plane to finish it up, you probably belong in a certified airplane. 



 



Pat Reilly



Mod 3 582 Rebuild



Rockford, IL



On Sat, Apr 16, 2011 at 10:11 AM, rawheels <rawheels(at)yahoo.com (rawheels(at)yahoo.com)> wrote:

--> Kitfox-List message posted by: "rawheels" <rawheels(at)yahoo.com (rawheels(at)yahoo.com)>



Just wanted to give a quick user report.



Airdale does carry the wood streamlined strips (at) $2/ft.  Brett was very easy to work with, and the test pieces I ordered were delivered quickly.



I've attached some photos of the product.  There are a few observations that probably need to be pointed out about them if someone else is looking at ordering some for their project.



1.  As shown in the photos, the shape of the pieces aren't really "streamlined"; your buying a 1x2 with a couple of angled table saw cuts and a pass across a router.  So, don't expect a lot for the low price.



2.  The piece feels pretty heavy (at) 1.2 lbs for a 3' section (I'm assuming it is pine).  This might hold up better on the back edge of my landing gear, but that could add up if you were doing struts.  With Balsa (at) ~$18 for a 2x4x36 board from ACS, you could make some lighter ones for about the same price if you have the tools already.



3.  The strips will make the tubes more streamlined, but they fall short of the desired 4:1 teardrop shape.  When attached to a 1" tube the overall length is a little shorter than 2.75".  That is about the same size as on my old landing gear, and will work for my purpose, but may not be desirable for others.



Ryan



--------

Ryan Wheeler

Kitfox IV-1200

Indianapolis, IN





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=337130#337130





Attachments:



http://forums.matronics.com//files/img00072_20110415_1025_210.jpg

http://forums.matronics.com//files/img00070_20110415_1024_206.jpg

http://forums.matronics.com//files/img00069_20110415_1=======================

y Browse, Chat, FAQ,

="http://www.matronics.com/Navigator?Kitfox-List" target="_blank">http:=====

http://forums.mle, List Admin.

=====





-- 

Pat Reilly

Mod 3 582 Rebuild

Rockford,IL



 	  Quote: 	
		    [/url][url=http://forums.matronics.com/][/url][url=http://forums.matronics.com/][/url][url=http://forums.matronics.com/][b][u]http://www.matronics.com/Navigator?Kitfox-List 	
0 	  Quote: 	
		   	
1 	  Quote: 	
		   	
2 	  Quote: 	
		   	
3 	  Quote: 	
		   	
4 	  Quote: 	
		   	
5 	  Quote: 	
		   	
6 	  Quote: 	
		   	
7 	  Quote: 	
		   	
8

  [quote][b]

n61kf

Joined: 27 Aug 2006
Posts: 23
Location: Waynesville Ohio

Posted: Sun Apr 17, 2011 3:49 am Post subject: Re: Wood Fairings

This light weight plastic fairing might be worth looking into. It would have to be split in order to install on our struts, then foam filled.

http://www.streamline.8k.com/

_________________
Keith Schneider
Red Stewart Airfield
Waynesville Ohio
KF IV 912ul

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum