Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Best Prop for HR 2

Matronics Email Lists Forum Index -> Rocket-List

View previous topic :: View next topic

Author Message

Rainair

Joined: 13 Feb 2007
Posts: 10

Posted: Sat Dec 04, 2010 11:38 am Post subject: Best Prop for HR 2

Hello,



what the best prop for HR2 ?



[F3YR-1ARF7693DF*1] Hartzell 3-Blade Propeller (D Twist)



[M2YR-1BF/8475D4] Hartzell 2-blade Propeller



[MTV-9-B/198-52] MT 3-bladed propeller 



[MTV-9-B-C/C-198-52] MT 3-Bladed Propeller 



Maybe important is the noise. Which db are the propellers ?



At germany i need 75 decibel



Which Prob to quiet down ?



Thanks,

Rainer

2010-11-19_20.40_klein.JPG

Description:

step by step

Filesize:

82.88 KB

Viewed:

12412 Time(s)

lessdragprod(at)aol.com
Guest

Posted: Sat Dec 04, 2010 8:35 pm Post subject: Best Prop for HR 2

Hello Rainer,

    

   The quietest propeller is probably the 4 blade propeller, 

   MTV-14-B/190-59b

   with a 76" diameter (190cm diameter).

 

 Regards,

   Jim Ayers

   

 

 

   --

hr2pilot(at)aol.com
Guest

Posted: Sat Dec 04, 2010 9:31 pm Post subject: Best Prop for HR 2

But it sucks for performans



Sent from my iPhone



On Dec 4, 2010, at 8:31 PM, Jim Ayers <lessdragprod(at)aol.com (lessdragprod(at)aol.com)> wrote:



[quote] Hello Rainer,

    

   The quietest propeller is probably the 4 blade propeller, 

   MTV-14-B/190-59b

   with a 76" diameter (190cm diameter).

 

 Regards,

   Jim Ayers

   

 

 

   --

sprocket(at)vx-aviation.c
Guest

Posted: Sat Dec 04, 2010 10:43 pm Post subject: Best Prop for HR 2

I am looking for a 'firewall forward' equipment list for finishing my HR-II.

It would be handy to purchase all of the stuff at once rather than 

discovering all the bits and pieces I need as I go and waiting for parts 

orders.



Anyone have a definitive list?



John, what do you sell that I need?



Vern

lessdragprod(at)aol.com
Guest

Posted: Sun Dec 05, 2010 3:48 pm Post subject: Best Prop for HR 2

Hi John,

    

   I didn't know that you've flown one of these Rocket 4 blade MT Propellers.  

    

   Rainer, in Germany, is likely going to be limited to 2500 RPM maximum.

    

   An F-1 customer with the 3 blade Rocket propeller says the 4 blade MT Rocket propeller is 2 knots sower at 4,000'.

   But faster at 9,500' and 10,500'.

    

   John.  I know this doesn't work for your typical flight.  The highest altitude you reach being when you climb to pattern altitude.  

    

   Jim Ayers

   

 

 

   --

Rainair

Joined: 13 Feb 2007
Posts: 10

Posted: Thu May 12, 2011 10:08 am Post subject: Re: Best Prop for HR 2

Hello



anyone use woodcomp Propeller ?



http://www.woodcomp.cz/download/WC_KW-10_letak_A4.indd.pdf

n395v

Joined: 10 Jan 2006
Posts: 450

Posted: Fri May 13, 2011 5:01 am Post subject: Re: Best Prop for HR 2

I can't speak for a Harmon Rocket but a lot of F1s had a terrible vibration (prop-beat or whatever) that was intolerable with a 2 blade hartzell. Mine was one of them. Changed to a 3 blade MT (one of Jim's)



Problem was gone and plane was much quieter. It did however have measurable loss of performance in climb and cruise as well as top speed.



I think Tom Gummo has a 4 blade MT on his Harmon and I recall somewhere he called it the slowest Rocket in the West.



In my opinion the less blades the better for performance and cost. As to the manufacturer I have heard few complaints about Hartzell or MT. Never heard of the brand you are considering.

_________________
Milt

stuart(at)stuarthutchison
Guest

Posted: Fri May 13, 2011 5:27 am Post subject: Best Prop for HR 2

Should have better climb on 3 blades, but lower top speed (extra blade = more drag). 2 for go, 3 for show!



Kind regards, Stu



www.mykitlog.com/rockfly



Sent from my iPhone



On 13/05/2011, at 11:01 PM, "n395v" <Bearcat(at)bearcataviation.com> wrote:



 	  Quote: 	
		   

 

 I can't speak for a Harmon Rocket but a lot of F1s had a terrible vibration (prop-beat or whatever) that was intolerable with a 2 blade hartzell. Mine was one of them. Changed to a 3 blade MT (one of Jim's)

 

 Problem was gone and plane was much quieter. It did however have measurable loss of performance in climb and cruise as well as top speed.

 

 I think Tom Gummo has a 4 blade MT on his Harmon and I recall somewhere he called it the slowest Rocket in the West.

 

 In my opinion the less blades the better for performance and cost. As to the manufacturer I have heard few complaints about Hartzell or MT. Never heard of the brand you are considering.

 

 --------

 Milt

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=339741#339741

smokyray(at)rocketmail.co
Guest

Posted: Fri May 13, 2011 6:45 am Post subject: Best Prop for HR 2

Best HR2 prop? The one that works:) seriously, the prototype HR2 has a Hartzell 2 blade sold by John. After testing 2 props on mine and chatting with other folks, here is my 2cents.



 I had a "D" twist Hartzell 2 blade on mine optimized for 2500 RPM. Their is also a "J" twist optimized for 2350 RPM. Hartzell also makes a  2blade Blended airfoil prop for the Rocket currently flown by Tom Martin. The MT would be smoother but a bit slower at top end, the 3blade Hartzell is too heavy. 

I would either go with the J twist or BA 2 blade from Hartzell purchased through Harmon (J) or Team Rocket (BA)



Smokey



Sent from my iPhone



On May 13, 2011, at 9:01, "n395v" <Bearcat(at)bearcataviation.com> wrote:



 	  Quote: 	
		   

 

 I can't speak for a Harmon Rocket but a lot of F1s had a terrible vibration (prop-beat or whatever) that was intolerable with a 2 blade hartzell. Mine was one of them. Changed to a 3 blade MT (one of Jim's)

 

 Problem was gone and plane was much quieter. It did however have measurable loss of performance in climb and cruise as well as top speed.

 

 I think Tom Gummo has a 4 blade MT on his Harmon and I recall somewhere he called it the slowest Rocket in the West.

 

 In my opinion the less blades the better for performance and cost. As to the manufacturer I have heard few complaints about Hartzell or MT. Never heard of the brand you are considering.

 

 --------

 Milt

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=339741#339741

t.gummo(at)verizon.net
Guest

Posted: Fri May 13, 2011 1:43 pm Post subject: Best Prop for HR 2

Guys,



I also have a thirty year old engine that I rebuilt.  IO-540J4A5 is only 250 

HP as well.    So who knows what the real HP is?  Jim tells me that I 

just don't have the HP to use my prop properly.

Part of my slowest is that I built the plane myself and while it turned out 

great, I clearly didn't know anything about getting speed out of an 

aircraft.



I didn't have an vibration when I had a two blade Hartzell.  In my case, the 

three blade MT was as fast as the two blade Hartzell.

My four blade MT is slower as I used to cruise:

    at 10,500 or 11,500 MSL

    Full throttle.

    RPM 2100

    Leaned to 10.0 to 10.5 GPH

    KIAS = 140    True = 180 Knots

with MT prop:

    KIAS = 135    True = 170 Knots



For local flying, I really don't see much of a difference.



Numbers are from the top of my head but they are close.



Tom "GummiBear" Gummo

Major USAF Retired, F-4G Wild Weasel Instructor Pilot

Harmon Rocket II, N561FS, 390 hours of the biggest grin



---

sprocket(at)vx-aviation.c
Guest

Posted: Tue May 17, 2011 8:26 pm Post subject: Best Prop for HR 2

Message for John Harmon:  Is your on-line ordering system up to date?  It 

appears to add tax to my shopping cart, even though I'm located in Canada. 

I need to order some stuff, should I use your website or just contact you 

via email?



Thanks,

Vern Little

Display posts from previous:

	Matronics Email Lists Forum Index -> Rocket-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum