Matronics Email Lists :: View topic - brake lines with dual sticks

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

brake lines with dual sticks

Matronics Email Lists Forum Index -> Zenith601-List

View previous topic :: View next topic

Author Message

chris Sinfield

Joined: 28 Nov 2006
Posts: 270
Location: Sydney Australia

Posted: Sat May 28, 2011 2:23 pm Post subject: brake lines with dual sticks

Can someone shoot me a/ some  photos of how they put the plastic brake lines through the wing spar cut out/channel with duel sticks fitted?? 



There is not much room and I  was thinking of running them below the rudder cables through the plastic.



or any other Ideas.. I don't want to go outside the fuse and under the spar that way..



chris..

psm(at)att.net
Guest

Posted: Sat May 28, 2011 2:57 pm Post subject: brake lines with dual sticks

Hi Chris,



I guess you won't like my approach.  I ran the brake lines (nylon tubes) 

out the bottom skin up by the pedals and under the cabin all the way to 

the gear spring.  It may not sound very elegant, but it seems to work 

just fine.



Paul



On 5/28/2011 3:23 PM, chris Sinfield wrote:

 	  Quote: 	
		   



 Can someone shoot me a/ some  photos of how they put the plastic brake lines through the wing spar cut out/channel with duel sticks fitted??



 There is not much room and I  was thinking of running them below the rudder cables through the plastic.



 or any other Ideas.. I don't want to go outside the fuse and under the spar that way..



 chris..





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=341306#341306

tonyplane(at)bellsouth.ne
Guest

Posted: Sat May 28, 2011 3:33 pm Post subject: brake lines with dual sticks

Chris,

I know that there is not much room, but the lines will fit. I used "Adel" type clamps holding ribbed plastic split automotive wire conduit in which the lines were passed through. The clamps were installed both sides of the spar to prevent any interference with the cables. I also have dual sticks. 



Tony Graziano

Xl/Jab; N493TG 

615 trouble free fun hours. 

Sent from my iPhone



On May 28, 2011, at 5:23 PM, "chris Sinfield" <chris_sinfield(at)yahoo.com.au> wrote:



 	  Quote: 	
		   

 

 Can someone shoot me a/ some  photos of how they put the plastic brake lines through the wing spar cut out/channel with duel sticks fitted?? 

 

 There is not much room and I  was thinking of running them below the rudder cables through the plastic.

 

 or any other Ideas.. I don't want to go outside the fuse and under the spar that way..

 

 chris..

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=341306#341306

jaybannist(at)cs.com
Guest

Posted: Sat May 28, 2011 3:58 pm Post subject: brake lines with dual sticks

Chris,

 

 Sorry, I don't have any good photos of it, but I did just what you are thinking about.  I ran the brake lines through the nylon plates that cover the hole in the spar, just about an inch below the rudder cables.  Worked fine.

 

 Jay

  

     

  

    

     

  

     

  

    --

tonyplane(at)bellsouth.ne
Guest

Posted: Sat May 28, 2011 3:58 pm Post subject: brake lines with dual sticks

Just a clairficarion- the clamps were bolted through the lower skin on both sides of the center spar. 

Tony 

Sent from my iPhone

On May 28, 2011, at 6:30 PM, Tonyplane <tonyplane(at)bellsouth.net> wrote:

 	  Quote: 	

 Chris,

 I know that there is not much room, but the lines will fit. I used "Adel" type clamps holding ribbed plastic split automotive wire conduit in which the lines were passed through. The clamps were installed both sides of the spar to prevent any interference with the cables. I also have dual sticks. 

 Tony Graziano

 Xl/Jab; N493TG 

 615 trouble free fun hours. 

 Sent from my iPhone

 On May 28, 2011, at 5:23 PM, "chris Sinfield" <chris_sinfield(at)yahoo.com.au> wrote:

> 

> 

> Can someone shoot me a/ some  photos of how they put the plastic brake lines through the wing spar cut out/channel with duel sticks fitted?? 

> 

> There is not much room and I  was thinking of running them below the rudder cables through the plastic.

> 

> or any other Ideas.. I don't want to go outside the fuse and under the spar that way..

> 

> chris..

> 

> 

> 

> 

> Read this topic online here:

> 

> http://forums.matronics.com/viewtopic.php?p=341306#341306

> 

> 

> 

> 

> 

> 

> 

> 

> 

>

vk3eka(at)bigpond.net.au
Guest

Posted: Sat May 28, 2011 4:38 pm Post subject: brake lines with dual sticks

Paul/Chris,



I did the same. No problems so far.



Peter

Wonthaggi Australia

http://zodiac.cpc-world.com



--

rpf(at)wi.rr.com
Guest

Posted: Sat May 28, 2011 5:53 pm Post subject: brake lines with dual sticks

Hi Chris,



I ran my brake lines under the cabin.  Probably similar to what Paul did. 

526 hours with no problems.



Randy

---

build_254.JPG

Description:

Filesize:

974.16 KB

Viewed:

9494 Time(s)

build_253.JPG

Description:

Filesize:

1.02 MB

Viewed:

9494 Time(s)

its4jes(at)aim.com
Guest

Posted: Sun May 29, 2011 5:18 am Post subject: brake lines with dual sticks

Chris

 

 I just did it and came in just behind the main gear, under the seat and thru the large hole in the center spar structure.  

 You have to install u-shaped brackets on the floor  and tie the other end to the fuel sediment bowl or add another u-bracket 

 at that point to keep the lines at the lowest position to avoid the rest of the dual stick mechanisms.

 

 Lots of luck.

 

 JES

    

  

     

  

    

     

  

     

  

    --

bryanmmartin

Joined: 10 Jan 2006
Posts: 1018

Posted: Sun May 29, 2011 6:28 am Post subject: brake lines with dual sticks

I ran mine through the rudder cable tunnel and out behind the main gear spring.



On May 28, 2011, at 6:23 PM, chris Sinfield wrote:



 	  Quote: 	
		   

 

 Can someone shoot me a/ some  photos of how they put the plastic brake lines through the wing spar cut out/channel with duel sticks fitted?? 

 

 There is not much room and I  was thinking of running them below the rudder cables through the plastic.

 

 or any other Ideas.. I don't want to go outside the fuse and under the spar that way..

 

 chris..

 

 


	


-- 

Bryan Martin

N61BM, CH 601 XL,

RAM Subaru, Stratus re-drive.

do not archive.

_________________
--
Bryan Martin
N61BM, CH 601 XL, Stratus Subaru.
do not archive.

jonathan(at)entry.co.za
Guest

Posted: Sun May 29, 2011 8:39 am Post subject: brake lines with dual sticks

I took mine straight down thru the floor, and down the middle channel, and 

along the underside of the undercarriage.

Tapped into the undercarriage, and made small alluminium saddles to hold the 

pipes in place.



Has worked fine for 300hrs



Jonathan



---

rgeese

Joined: 16 Aug 2006
Posts: 19

Posted: Mon May 30, 2011 5:24 am Post subject: Re: brake lines with dual sticks

Hi Chris,



I know this is not what you were wanting, because I ran them outside the fuselage, but I wanted you to see my photos of the installation.



I store all my construction photos at this site:



http://cid-2c08001814b26710.photos.live.com/browse.aspx/Ron%5E4s%20601XL



The brake line installation photos are numbers 278 thru 287.



Hope this helps.



I'm not flying yet, so I can't give you an "operational report". I'm still working on the mandatory updates. The fuselage is done, and I now have the first wing torn apart.



Ron Geese

Reynoldsburg, Ohio USA

tonyplane(at)bellsouth.ne
Guest

Posted: Mon May 30, 2011 7:24 am Post subject: brake lines with dual sticks

Attached for info. from build photos.  hope they come through.

 Tony Graziano

 N493TG



 

   From: rgeese <rgeese1(at)columbus.rr.com>

To: zenith601-list(at)matronics.com

Sent: Mon, May 30, 2011 8:24:02 AM

Subject: Re: brake lines with dual sticks



--> Zenith601-List message posted by: "rgeese" <rgeese1(at)columbus.rr.com (rgeese1(at)columbus.rr.com)>



Hi Chris,



I know this is not what you were wanting, because I ran them outside the fuselage, but I wanted you to see my photos of the installation.



I store all my construction photos at this site:



http://cid-2c08001814b26710.photos.live.com/browse.aspx/Ron%5E4s%20601XL



The brake line installation photos are numbers 278 thru 287.



Hope this helps.



I'm not flying yet, so I  can't give you an "operational report". I'm still working on the mandatory updates. The fuselage is done, and I now have the first wing torn apart.



Ron Geese

Reynoldsburg, Ohio USA





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=341465#========================

IMAG0380.jpg

Description:

Filesize:

40.99 KB

Viewed:

9443 Time(s)

IMAG0381.jpg

Description:

Filesize:

23.55 KB

Viewed:

9443 Time(s)

IMAG0385.jpg

Description:

Filesize:

32.08 KB

Viewed:

9443 Time(s)

IMAG0386.jpg

Description:

Filesize:

17.88 KB

Viewed:

9443 Time(s)

IMAG0387.jpg

Description:

Filesize:

32.42 KB

Viewed:

9443 Time(s)

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith601-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum