Matronics Email Lists :: View topic - Quick Build fuselage (landing gear fittings)

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Quick Build fuselage (landing gear fittings)

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

billz

Joined: 08 Jul 2009
Posts: 26
Location: Clinton, New York

Posted: Mon May 30, 2011 11:37 am Post subject: Quick Build fuselage (landing gear fittings)

I'm finally getting around to working on my quick build fuselage.  As I've read from others, you start with dis-assembly of some parts, follow the plans to make sure everything is done correctly as you reassemble.  I've gotten to the task of removing the landing gear fittings.  Boy is this a pain!!



I'm having trouble getting the bolts out and am wondering how I'm ever going to get them back in, when the time comes.  Any insights on the process of removing these bolts and then getting them back in would be greatly appreciated.  I'm sure there are many techniques that work better than what I've been trying.



Thanks in advance.

Mauledriver(at)nc.rr.com
Guest

Posted: Mon May 30, 2011 12:07 pm Post subject: Quick Build fuselage (landing gear fittings)

Don't do it?  Not being trying to be facetious but some disassemble, 

some don't.



On 5/30/2011 3:37 PM, billz wrote:

 	  Quote: 	
		   



 I'm finally getting around to working on my quick build fuselage.  As I've read from others, you start with dis-assembly of some parts, follow the plans to make sure everything is done correctly as you reassemble.  I've gotten to the task of removing the landing gear fittings.  Boy is this a pain!!



 I'm having trouble getting the bolts out and am wondering how I'm ever going to get them back in, when the time comes.  Any insights on the process of removing these bolts and then getting them back in would be greatly appreciated.  I'm sure there are many techniques that work better than what I've been trying.



 Thanks in advance.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=341506#341506

dmaib(at)mac.com
Guest

Posted: Mon May 30, 2011 2:19 pm Post subject: Quick Build fuselage (landing gear fittings)

Early in the program, some builders found a few odds and ends under  

the floorboards when they opened them up. (clecos, rivits, etc.)  

However, it seems that later on this problem was solved at the QB  

factory. I started to take mine apart and had a terrible time with  

the left gear weldment. It was clean under the floor, so I elected  

not to open up the right side. I felt like I was risking doing some  

damage while undoing a job that I had paid to have done by the  

factory. No regrets in my decision and if I were to build another one  

I would not consider doing it. Some folks planned to put in sound  

deadening material or insulation while having the floors out. I think  

that someone on the forum has figured out a way to do that without  

taking the floors up.  In the end, of course, this is a decision you  

get to make. There are several builders who easily and quickly  

removed and reinstalled the gear weldments and floors. I was not one  

of them!

Just my $.02 worth.



David Maib

40559

Flying



On May 30, 2011, at 3:37 PM, billz wrote:



 	  Quote: 	
		   



 I'm finally getting around to working on my quick build fuselage.   

 As I've read from others, you start with dis-assembly of some  

 parts, follow the plans to make sure everything is done correctly  

 as you reassemble.  I've gotten to the task of removing the landing  

 gear fittings.  Boy is this a pain!!



 I'm having trouble getting the bolts out and am wondering how I'm  

 ever going to get them back in, when the time comes.  Any insights  

 on the process of removing these bolts and then getting them back  

 in would be greatly appreciated.  I'm sure there are many  

 techniques that work better than what I've been trying.



 Thanks in advance.





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=341506#341506

dlm34077(at)q.com
Guest

Posted: Mon May 30, 2011 3:43 pm Post subject: Quick Build fuselage (landing gear fittings)

Why disassemble; you paid to have someone else assemble and two other 

compliance inspections performed. Make a visual inspection but don't undo 

something for which you already paid. Some take the fuel tanks off the QB 

wings; again why? They have already been tested at the QB facility. If they 

leak, it will be your problem now or at some future time.It is possible to 

create a problem during the tank removal. Some will install a stall warning 

system; others will rely on an EFIS warning. If you fly the airplane and do 

not feel the impending stall you are comatose or embalmed. The stick shakes 

very noticeably. My point is taking everything apart costs you time and 

money. Taking things apart can also cause problems noticed or unnoticed 

during reassembly. That's the reason the post annual inspection test flight 

is one of the riskier of the year.

---

Jim Berry

Joined: 10 Jan 2006
Posts: 237
Location: Denver

Posted: Mon May 30, 2011 4:04 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

I was one of those that put insulation under the floor. If you want to go that route you can drill out some of the rivets and pull the aft edge of the floor boards up, without completely removing them. Use the rivet lines on the bottom to make templates for pieces of insulation to fit between the stiffeners.



If you don't want insulation, just tape a section of 1" tubing to your shop vac. and slide it through the lightening holes to suck out anything left under the floors by the QB guys.



Either way, there is no need to remove the landing gear fittings.



Jim Berry

N15JB

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Mon May 30, 2011 4:45 pm Post subject: Quick Build fuselage (landing gear fittings)

No. Do not loosen and retorque. First of all you cannot accurately 

measure torque that was applied. All you are doing is removing more of 

the cad plating on the bolt. An AN-3 properly torqued, when loosened 

later will likely take 50-80 in/lbs to break free, even though only 

25"/lbs plus the resistance of the locknut were applied to begin with. 

Huge waste of time that accomplishes nothing.

It is easy to remove the few pop-rivets that hold the floor, to vacuum 

underneath and a bit harder to push insulation in, but very doable 

without removing fittings.

On 5/30/2011 5:25 PM, Phillip Perry wrote:

 	  Quote: 	
		   I took one of mine out because of a screw up that I made.  It was a 

 nightmare and there wasn't anything to see after I pulled it (I pulled 

 the floor skin "just because").



 I'd leave them right where they are, but I'd consider loosening all of 

 the AN hardware to neutral and then re-tourqing so you know they're 

 correct.



 Phil



 *

 *

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

billz

Joined: 08 Jul 2009
Posts: 26
Location: Clinton, New York

Posted: Mon May 30, 2011 5:07 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

I appreciate all of your comments.  It's great to learn from experience.  



I'm all for taking the simple approach.  I'm not planning to put insulation under the floor, but wasn't sure if I needed access for some other reason.  Looks like a little cleaning and on to the next step.



Thank you,

Bill

maca2790

Joined: 26 Jan 2011
Posts: 59
Location: Australia

Posted: Mon May 30, 2011 5:43 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

I know the feeling, I took the bolts out of my QB  last week. It took nearly 6 hours to dissemble everything. There was a lot of damage done to the bolts during the process and they will need to be replaced.



I reamed out the holes that were tight and left the others alone but it left me wondering how on earth they put the bolts in with them being so tight?



Under the floor pans there was a little dust and some aluminium savings but otherwise it looks pretty good. I'm not planning on Insulating I just wanted to prime under the floor pans.



cheers

John MacCallum

QB 41016 

VHDUU

Kellym

Joined: 10 Jan 2006
Posts: 1705
Location: Sun Lakes AZ

Posted: Mon May 30, 2011 6:29 pm Post subject: Quick Build fuselage (landing gear fittings)

If you do the factory stall warning vane, removal of the left tank     is necessary. Regardless of aerodynamic warning, IMHO, either an AOA     or stall warning system should be mandatory, as it is for certified     planes. Not every pilot is observant of aerodynamic warnings when     occupied with other tasks in the cockpit, and a horn, voice or     flashing light is better than nothing.

     There is nothing about removing a tank, short of dropping it that is     likely to have one bit of effect on how well the tank is sealed.     None of the fasteners penetrate the sealed portion. A tank is 100%     easier to do a thorough leak check with it off the wing. If you have     one that leaks, you will want to be able to negotiate with Vans     ASAP, not months after delivery. Just my opinion and what I did with     mine. Being owner built and maintained, all are welcome to make     their own choices.

     Kelly

     

       [img]cid:part1.08030009.03010209(at)aviating.com[/img]

     

     On 5/30/2011 4:40 PM, DLM wrote:      	  Quote: 	
		  -  Some take the fuel tanks off the QB wings; again       why? They have already been tested at the QB facility. If they       leak, it will be your problem now or at some future time.It is       possible to create a problem during the tank removal. Some will       install a stall warning system; others will rely on an EFIS       warning. If you fly the airplane and do not feel the impending       stall you are comatose or embalmed. The stick shakes very       noticeably. My point is taking everything apart costs you time and       money. Taking things apart can also cause problems noticed or       unnoticed during reassembly. That's the reason the post annual       inspection test flight is one of the riskier of the year.       

       -

mime-attachment.jpeg

Description:

Filesize:

1.97 KB

Viewed:

13662 Time(s)

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor # 5286
KCHD

dhmoose

Joined: 22 Nov 2010
Posts: 29
Location: Portland, OR

Posted: Tue May 31, 2011 4:54 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

Just did this a few weeks ago.  When I noted that all of the QB bolts had torque seal BUT the landing gear bolts, the floors can't be removed without removing the landing gear, and I want insulation under the floorboards...I decided to remove the landing gear mounts. I It was very difficult to remove both gear mounts due to the incredible force on some of the bolts.  You can tell that some bolts were doing 100% of the work and others were doing 0% (as evidenced by the pressure to remove and the surface cad lost).   In the end, they came out with some damage to the bolt heads (from the plier used to grab and pull).  A few bucks worth of bolts from Vans and I was feeling good about my ability to access the floors.  No odd findings, but good access to verify everything and add insulation.  I fabricated drifts out of the old bolts (see image attached) which my tech counselor said would be very helpful in aligning everything for reassemby.  Reassembly is around the corner...so I'll let everyone know if it was more/less difficult then removal.  In the end, I do not feel it is imperative to remove the gear, but no harm is caused by doing so.

photo.JPG

Description:

Filesize:

690.68 KB

Viewed:

13631 Time(s)

_________________
David Halmos
RV-10
Flying!
Portland, OR

Last edited by dhmoose on Wed Jun 01, 2011 6:14 am; edited 1 time in total

Bob Turner

Joined: 03 Jan 2009
Posts: 885
Location: Castro Valley, CA

Posted: Tue May 31, 2011 8:31 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

BTW, my QB fuel tanks came installed - but with bolts that were one size too long! To compensate, there were 2 washers under each bolt head.



I thought this was a potential disaster waiting to happen. 10 years from now, someone (me) pulls the tanks, sees the extra washer, and throws it away. Now the bolts bottom out before coming tight.



Whether you choose to pull the QB stuff apart or not is your choice (I left my gear mount alone) but do check everything.

_________________
Bob Turner
RV-10 QB

nukeflyboy

Joined: 05 Jan 2008
Posts: 162
Location: Granbury, TX

Posted: Wed Jun 01, 2011 12:25 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

Don't take apart anything that you don't have to.  I didn't understand the comment about removing the right fuel tank to install the stall warning.  I didn't have to for it or for a heated pitot.

You can leak test the fuel tanks with them installed.

You should think about your electrical distribution and the need for conduit runs under the floor.  This is a convenient place to run cable out of the way and the wires can be pulled later.  You can also consider insulating the floor at the same time, though that is clearly optional.

_________________
Dave Moore
RV-6 built and sold
RV-10 built and flying

Kelly McMullen

Joined: 16 Apr 2008
Posts: 1188
Location: Sun Lakes AZ

Posted: Wed Jun 01, 2011 12:44 pm Post subject: Quick Build fuselage (landing gear fittings)

If you read the plans, the left(not right) fuel tank is called out to be removed to install the stall warning. Otherwise you are trying to do a knee scope with an endoscope designed for colonoscopy. Sure, you can avoid it, but the scrapes you get will be worse than pulling the tank. Other than being a fair number of screws and bolts, removal simply is not difficult, and does mean you can leak check with soapy water all surfaces while rotating tank to have tested area on top. It is not in the class of trying to remove the gear weldments. 

 Kelly

Finish/FWF+never ending fiberglass hell



On Wed, Jun 1, 2011 at 1:25 PM, nukeflyboy <flymoore(at)charter.net (flymoore(at)charter.net)> wrote:

  	  Quote: 	
		  --> RV10-List message posted by: "nukeflyboy" <flymoore(at)charter.net (flymoore(at)charter.net)>

  

 Don't take apart anything that you don't have to.  I didn't understand the comment about removing the right fuel tank to install the stall warning.  I didn't have to for it or for a heated pitot.

 You can leak test the fuel tanks with them installed.

 You should think about your electrical distribution and the need for conduit runs under the floor.  This is a convenient place to run cable out of the way and the wires can be pulled later.  You can also consider insulating the floor at the same time, though that is clearly optional.

  

 --------

 Dave Moore

 RV-6 flying

 RV-10 QB - FWF

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=341769#341769

 

 

 

 

 

 

 

 ===========

 arget="_blank">http://www.matronics.com/Navigator?RV10-List

 ===========

 http://forums.matronics.com

 ===========

 le, List Admin.

 ="_blank">http://www.matronics.com/contribution

 ===========

 

 

 

 	


#avg_ls_inline_popup{position: absolute;z-index: 9999;padding: 0px 0px;margin-left: 0px;margin-top: 0px;overflow: hidden;word-wrap: break-word;color: black;font-size: 10px;text-align: left;line-height: 130%;}  [quote][b]

_________________
Kelly McMullen
A&P/IA, EAA Tech Counselor
KCHD

johngoodman

Joined: 18 Sep 2006
Posts: 530
Location: GA

Posted: Thu Jun 02, 2011 4:46 am Post subject: Re: Quick Build fuselage (landing gear fittings)

I did not pull the floors. You can access the front ones through the lightening holes under the seats, For the back ones I drilled a few holes at one end. I used a big magnet, vacuum, and borescope - saw nothing. I then filled them with Abesco FP200 fire proof foam. It is closed cell, won't burn, and gives a solid feel to the floor. Pretty pink color matches the canopy (g). Only expands about 2x. Here is the manufacturer:

http://www.abesco.net/productus/products/fp200.php



The suggestion about conduit is important. Get as much conduit in the baggage floors as you can.



John

_________________
#40572 Phase One complete in 2011

dhmoose

Joined: 22 Nov 2010
Posts: 29
Location: Portland, OR

Posted: Thu Jun 02, 2011 6:13 am Post subject: Re: Quick Build fuselage (landing gear fittings)

Dave, what wire/cable are you running under the front floor panels? It seems like there isn't anything passing through that area and since I'm about to close it up, I thought I'd ask. What about antennas? I was planning the transponder antenna to go in the midline (under the tunnel) , not under the floor panels of the pilot/right seater.  Thanks. 

 	  nukeflyboy wrote: 	
		  Don't take apart anything that you don't have to.  I didn't understand the comment about removing the right fuel tank to install the stall warning.  I didn't have to for it or for a heated pitot.

You can leak test the fuel tanks with them installed.

You should think about your electrical distribution and the need for conduit runs under the floor.  This is a convenient place to run cable out of the way and the wires can be pulled later.  You can also consider insulating the floor at the same time, though that is clearly optional.

_________________
David Halmos
RV-10
Flying!
Portland, OR

nukeflyboy

Joined: 05 Jan 2008
Posts: 162
Location: Granbury, TX

Posted: Thu Jun 02, 2011 6:28 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

David,

I couldn't recall which floor panels were installed with the QB and which ones I did.  You are correct - there is no need to run anything under the front floorboards.  I have run quite a bit under the rear seat pans and baggage floor.  My comm antennas are attached on the belly just aft of the rear wing spar with the coax running forward just above the rear spar and then to the side panel (see photo).  

There is plenty of room to run wires along the sides starting forward and running aft to the rear seat side panel.  At this point my wires dive under the floor and emerge aft of the baggage compartment at the battery.

001reduced.jpg

Description:

Filesize:

61.81 KB

Viewed:

13545 Time(s)

008 (2) reduced.jpg

Description:

Filesize:

60.93 KB

Viewed:

13545 Time(s)

007 (2) reduced.jpg

Description:

Filesize:

49.75 KB

Viewed:

13545 Time(s)

_________________
Dave Moore
RV-6 built and sold
RV-10 built and flying

nukeflyboy

Joined: 05 Jan 2008
Posts: 162
Location: Granbury, TX

Posted: Thu Jun 02, 2011 6:28 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

David,

I couldn't recall which floor panels were installed with the QB and which ones I did.  You are correct - there is no need to run anything under the front floorboards.  I have run quite a bit under the rear seat pans and baggage floor.  My comm antennas are attached on the belly just aft of the rear wing spar with the coax running forward just above the rear spar and then to the side panel (see photo).  

There is plenty of room to run wires along the sides starting forward and running aft to the rear seat side panel.  At this point my wires dive under the floor and emerge aft of the baggage compartment at the battery.

001reduced.jpg

Description:

Filesize:

61.81 KB

Viewed:

13544 Time(s)

008 (2) reduced.jpg

Description:

Filesize:

60.93 KB

Viewed:

13544 Time(s)

007 (2) reduced.jpg

Description:

Filesize:

49.75 KB

Viewed:

13544 Time(s)

_________________
Dave Moore
RV-6 built and sold
RV-10 built and flying

dhmoose

Joined: 22 Nov 2010
Posts: 29
Location: Portland, OR

Posted: Fri Jun 03, 2011 10:11 pm Post subject: Re: Quick Build fuselage (landing gear fittings)

Dave, Thanks for the pictures. It's always nice to get the visual!  Today, it was front floors but the baggage/rear floors are around the corner.  I'm excited to get to the conduit. Thanks again, David

_________________
David Halmos
RV-10
Flying!
Portland, OR

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum