 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
mike.sinclair(at)ATT.NET
Guest
|
 Posted: Sun May 14, 2006 2:47 pm Post subject: Matco wheel bearings |
 |
|
Just wanting to see if anyone else has had to replace wheel bearings in the Matco MH6BD.75 wheel assembly as used on the 701.
Mainly was wondering if the bearings are something that can be picked up from a typical bearing supply company, or whether this
is a part made exclusively for Matco. OD looks to be 1 5/8" and fits on a 3/4" axle. Also have some confusion as to the current
part number of the bearing. I've managed to come up with 4 different variations of a basic part number, what I think I'm reading
on my existing bearings (can't find my magnifying glass to be sure), one poor quality .jpg on the Matco site, and 2 different
numbers on a friends wheel assembly drawing. Wheel made strange noises while taxiing yesterday and today, but was not locking
up. Pulled the wheel off this afternoon and the inner bearing most defintely has some rough spots. Got to get it back together
by Sat. so can go to a local fly-in. Thanks
Mike Sinclair
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
 |
frank.hinde(at)hp.com
Guest
|
| Posted: Sun May 14, 2006 3:35 pm Post subject: Matco wheel bearings |
|
|
Bearings are never made specifically for a purpose and I have yet to
find one I could not pick up at the local supplier.
There are usually several different manufacturers (all with different
part numbers) that are the same bearing.
The good news is they all know what each others numbers are.
Not sure for the 701 but the number for the 601 beaarings are 1623RS
They look to be the same size as the one your describing
Frank
--
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
mike.sinclair(at)ATT.NET
Guest
|
| Posted: Mon May 15, 2006 12:08 pm Post subject: Matco wheel bearings |
|
|
Thanks for the info Frank. Ran into a local bearing supply in Wichita this morning. Got the
bearing I needed for $12, wheel is back together, plane is on it's own feet, and I'm ready
for a fly-in this weekend. Turns out the replacement bearing I needed had a 1630RS part
number and was made in China rather than Japan as the original was marked.
Mike
"Hinde, Frank George (Corvallis)" wrote:
| Quote: |
Bearings are never made specifically for a purpose and I have yet to
find one I could not pick up at the local supplier.
There are usually several different manufacturers (all with different
part numbers) that are the same bearing.
The good news is they all know what each others numbers are.
Not sure for the 701 but the number for the 601 beaarings are 1623RS
They look to be the same size as the one your describing
Frank
|
| | - The Matronics Zenith-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Zenith-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
