Matronics Email Lists :: View topic - EXTERNAL: Searching for Earl's oil cooler

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

EXTERNAL: Searching for Earl's oil cooler

Matronics Email Lists Forum Index -> Pulsar-List

View previous topic :: View next topic

Author Message

michael.cowan(at)lmco.com
Guest

Posted: Mon Aug 08, 2011 5:54 am Post subject: EXTERNAL: Searching for Earl's oil cooler

So the 41 series won’t work?  To get you going, I would be willing to ship mine out to you.  Let me know.

- Mike

 

From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of pilot623

Sent: Saturday, August 06, 2011 11:07 AM

To: pulsar-list(at)matronics.com; Pulsar-Aviators(at)yahoogroups.com

Subject: EXTERNAL: Searching for Earl's oil cooler

 

I had to abandon my plane in Searcy, AR and drive home because we could not repair the oil cooler after the "welder" destroyed it. We tried bypassing the cooler but oil temps ran too high on a short test flight even at a very light power setting (it was 111 degrees outside!).

 

Thanks to several of you who responded to my pleas for help. I'm looking for an Earl's 61002 (dimensions below) which is apparently no longer in production. If you have that cooler and would be willing to part with it (permanently), please let me know. Next steps include contacting Earl's to see if they know if any of their distributors or resellers have one on the shelf. Failing there, it looks like their # 21000 could be adapted to work with a 2.5" mounting extension, though the cooling area would be only 61.5% of the original one. 

 

Thanks again for all offers of assistance.

 

Jim

N623JF

Rotax 912S



From: owner-pulsar-list-server(at)matronics.com [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of pilot 623

Sent: Wednesday, August 03, 2011 7:47 PM

To: pulsar-list(at)matronics.com; pulsar-builders(at)yahoo.com

Subject: Pulsar-List: Earl's oil cooler 	  Quote: 	
		  

I'm broken down in Searcy, AR and need help figuring out which Earl's oil cooler I have. The oil cooler developed a leak where one of the fittings goes in. I had a local guy (highly recommended) weld it and it looks like a dirt daubers nest now with several leaks and pinholes. I'm trying JB-Weld but as a backup, if I have to get a new cooler sent in, I need to know the Earl's part number. If any of you have the one supplied by Skystar and could give me the part number, I would be most appreciative.



 



Mine is dimensioned as follows:



 



Fitting centers 7.5"



Height 3"



Body width at the widest points 10.75"



Face width (b/t the tanks) 6.5"



Thickness 2"



Rows 8



 



Thanks for any help.



 



Jim

 	  Quote: 	
		    href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.comhref="http://www.matronics.com/contribution">http://www.matronics.com/c 	
  <= Archive Search & Download, 7-Day Browse, Chat, FAQ,[/b]http://www.matronics.com/Nav=            e great content also available via the Web Forums![/b] 	
http://forums.matronics.com[/b]<;       - List Contribution Web Site -http://www.matronics.com/contribution<====================[/b] [/quote]

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

pilot623(at)gmail.com
Guest

Posted: Mon Aug 08, 2011 6:49 am Post subject: EXTERNAL: Searching for Earl's oil cooler

Mike,

  

 Thanks for the offer but if I can find something to  permanently fix the problem, that's my first choice. The 41 series is 13 inches  long while mine is 10.75 so modifications would be required to the brackets if  it would fit at all.

  

 Jim



  	  Quote: 	
		           From: owner-pulsar-list-server(at)matronics.com    [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of Cowan,    Michael

Sent: Monday, August 08, 2011 8:53 AM

To:    pulsar-list(at)matronics.com

Subject: RE: EXTERNAL: Pulsar-List:    Searching for Earl's oil cooler

   

      

So    the 41 series won’t work?  To get you going, I would be willing to ship    mine out to you.  Let me know.   

-    Mike   

          

From:    owner-pulsar-list-server(at)matronics.com    [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of    pilot623

Sent: Saturday, August 06, 2011 11:07 AM

To:    pulsar-list(at)matronics.com; Pulsar-Aviators(at)yahoogroups.com

Subject:    EXTERNAL: Searching for Earl's oil    cooler



   

    

I had    to abandon my plane in Searcy, AR and drive home because we could not repair    the oil cooler after the "welder" destroyed it. We tried bypassing the cooler    but oil temps ran too high on a short test flight even at a very light    power setting (it was 111 degrees outside!).   

    

Thanks    to several of you who responded to my pleas for help. I'm looking for an    Earl's 61002 (dimensions below) which is apparently no longer in production.    If you have that cooler and would be willing to part with it (permanently),    please let me know. Next steps include contacting Earl's to see if they know    if any of their distributors or resellers have one on the shelf. Failing    there, it looks like their # 21000 could be adapted to work with a 2.5"    mounting extension, though the cooling area would be only 61.5% of the    original one.    

    

Thanks    again for all offers of assistance.   

    

Jim   

N623JF   

Rotax    912S         

   

From:    owner-pulsar-list-server(at)matronics.com    [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of pilot    623

Sent: Wednesday, August 03, 2011 7:47 PM

To:    pulsar-list(at)matronics.com; pulsar-builders(at)yahoo.com

Subject:    Earl's oil cooler    	  Quote: 	
		            

I'm broken down in Searcy, AR and need help figuring out      which Earl's oil cooler I have. The oil cooler developed a leak where one of      the fittings goes in. I had a local guy (highly recommended) weld it and it      looks like a dirt daubers nest now with several leaks and pinholes. I'm      trying JB-Weld but as a backup, if I have to get a new cooler sent in, I      need to know the Earl's part number. If any of you have the one supplied by      Skystar and could give me the part number, I would be most      appreciative.

          

 

          

Mine is dimensioned as follows:

          

 

          

Fitting centers 7.5"

          

Height 3"

          

Body width at the widest points      10.75"

          

Face width (b/t the tanks) 6.5"

          

Thickness 2"

          

Rows 8

          

 

          

Thanks for any help.

          

 

          

Jim

 	  Quote: 	
		    href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.comhref="http://www.matronics.com/contribution">http://www.matronics.com/c 	
  <= Archive Search & Download, 7-Day Browse, Chat, FAQ,[/b]http://www.matronics.com/Nav=            e great content also available via the Web Forums![/b] 	
http://forums.matronics.com[/b]<;          - List Contribution Web Site    -http://www.matronics.com/contribution<====================[/b] 	  Quote: 	
		   	


	
   [quote][b]

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

nfh(at)verizon.net
Guest

Posted: Mon Aug 08, 2011 8:08 am Post subject: EXTERNAL: Searching for Earl's oil cooler

On 8/8/2011 9:52 AM, Cowan, Michael wrote:      	  Quote: 	
		                       v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} <![endif]-->         <![endif]-->   <![endif]-->                

So             the 41 series won’t work?  To get you going, I would be             willing to ship mine out to you.  Let me know.         

-             Mike         

                                  

From:                 owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)                 [mailto:owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)] On                   Behalf Of pilot623

                 Sent: Saturday, August 06, 2011 11:07 AM

                 To: pulsar-list(at)matronics.com (pulsar-list(at)matronics.com);                 Pulsar-Aviators(at)yahoogroups.com (Pulsar-Aviators(at)yahoogroups.com)

                 Subject: EXTERNAL: Searching for                 Earl's oil cooler           

         

         

          

I             had to abandon my plane in Searcy, AR and drive home because             we could not repair the oil cooler after the "welder"             destroyed it. We tried bypassing the cooler but oil temps             ran too high on a short test flight even at a very light             power setting (it was 111 degrees outside!).         

          

Thanks             to several of you who responded to my pleas for help. I'm             looking for an Earl's 61002 (dimensions below) which is             apparently no longer in production. If you have that cooler             and would be willing to part with it (permanently), please             let me know. Next steps include contacting Earl's to see if             they know if any of their distributors or resellers have one             on the shelf. Failing there, it looks like their # 21000             could be adapted to work with a 2.5" mounting extension,             though the cooling area would be only 61.5% of the original             one.          

          

Thanks             again for all offers of assistance.         

          

Jim         

N623JF         

Rotax             912S                    

         

From:             owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)             [mailto:owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)] On               Behalf Of pilot 623

             Sent: Wednesday, August 03, 2011 7:47 PM

             To: pulsar-list(at)matronics.com (pulsar-list(at)matronics.com);             pulsar-builders(at)yahoo.com (pulsar-builders(at)yahoo.com)

             Subject: Earl's oil cooler          	  Quote: 	
		                          

I'm broken down in Searcy, AR and need               help figuring out which Earl's oil cooler I have. The oil               cooler developed a leak where one of the fittings goes in.               I had a local guy (highly recommended) weld it and it               looks like a dirt daubers nest now with several leaks and               pinholes. I'm trying JB-Weld but as a backup, if I have to               get a new cooler sent in, I need to know the Earl's part               number. If any of you have the one supplied by Skystar and               could give me the part number, I would be most               appreciative.           

                        

            

                        

Mine is dimensioned as follows:           

                        

            

                        

Fitting centers 7.5"           

                        

Height 3"           

                        

Body width at the widest points 10.75"           

                        

Face width (b/t the tanks) 6.5"           

                        

Thickness 2"           

                        

Rows 8           

                        

            

                        

Thanks for any help.           

                        

            

                        

Jim           

            	  Quote: 	
		    href="http://www.matronics.com/Navigator?Pulsar-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.comhref="http://www.matronics.com/contribution">http://www.matronics.com/c 	
           <= Archive Search & Download, 7-Day Browse, Chat, FAQ,http://www.matronics.com/Nav=            e great content also available via the Web Forums! 	
         http://forums.matronics.com<;                 - List Contribution Web Site -http://www.matronics.com/contribution<====================              	  Quote: 	
		   	
           

     	
     I have one be glad to send it to you call me.

     

     John Sondgeroth

     631 734 5515 work number in NY

      [quote][b]

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

nfh(at)verizon.net
Guest

Posted: Mon Aug 08, 2011 8:43 am Post subject: EXTERNAL: Searching for Earl's oil cooler

 	  Quote: 	
		   On       8/8/2011 9:52 AM, Cowan, Michael wrote:        	  Quote: 	
		                             v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} <![endif]-->           <![endif]-->   <![endif]-->                    

So                the 41 series won’t work?  To get you going, I would be               willing to ship mine out to you.  Let me know.           

-               Mike           

                                        

From:                   owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)                   [mailto:owner-pulsar-list-server(at)matronics.com (owner-pulsar-list-server(at)matronics.com)]                   On Behalf Of pilot623

                   Sent: Saturday, August 06, 2011 11:07 AM

                   To: pulsar-list(at)matronics.com (pulsar-list(at)matronics.com);                   Pulsar-Aviators(at)yahoogroups.com (Pulsar-Aviators(at)yahoogroups.com)

                   Subject: EXTERNAL: Searching for                   Earl's oil cooler             

           

           

            

I               had to abandon my plane in Searcy, AR and drive home               because we could not repair the oil cooler after the               "welder" destroyed it. We tried bypassing the cooler but               oil temps ran too high on a short test flight even at a               very light power setting (it was 111 degrees outside!).           

            

Thanks                to several of you who responded to my pleas for help. I'm               looking for an Earl's 61002 (dimensions below) which is               apparently no longer in production. If you have that               cooler and would be willing to part with it (permanently),               please let me know. Next steps include contacting Earl's               to see if they know if any of their distributors or               resellers have one on the shelf. Failing there, it looks               like their # 21000 could be adapted to work with a 2.5"               mounting extension, though the cooling area would be only               61.5% of the original one.            

            

Thanks                again for all offers of assistance.           

            

Jim           

N623JF           

Rotax                912S         

       	
     	
         I have one call me

          John Sondgeroth

         631 734 5515

     [quote]        	  Quote: 	
		                      

                        

           

                        

       	
     [b]

- The Matronics Pulsar-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Pulsar-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Pulsar-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum