Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Access Panel for Outer Tank Filters

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List
View previous topic :: View next topic  
Author Message
Martin Pohl



Joined: 30 Jan 2006
Posts: 118
Location: CH-8645 Jona SG, Switzerland

PostPosted: Wed May 17, 2006 7:05 am    Post subject: Access Panel for Outer Tank Filters Reply with quote

Hi

To all the 4-tank-Zodiac XL-builders: Did you install access panels at the tank outlets for the outer tanks (to get access to the connection and the tank filter)? The space between nose rib #5 and #6 is rather limited (1/2 " approx.)...

On Zenith's plans are only access panels for the inner tanks.

Any advice?

Rgds
Martin


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Martin Pohl
Zodiac XL QBK
8645 Jona, Switzerland
http://www.pohltec.ch/ZodiacXL/Main.html
Back to top
View user's profile Send private message Send e-mail Visit poster's website
rsq2424(at)yahoo.com
Guest





PostPosted: Wed May 17, 2006 9:19 am    Post subject: Access Panel for Outer Tank Filters Reply with quote

Quote:
To all the 4-tank-Zodiac XL-builders: Did you install access
panels at the tank outlets for the outer tanks (to get access to
the connection and the tank filter)? The space between nose
rib #5 and #6 is rather limited (1/2 " approx.)...

Yes, I did, and you're right, there's not much room between those ribs. I'm hoping there will be just enough space to get a wrench in there if I ever have to pull the screens out, but haven't tried it yet.

Mike Fortunato
601XL


---------------------------------
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Martin Pohl



Joined: 30 Jan 2006
Posts: 118
Location: CH-8645 Jona SG, Switzerland

PostPosted: Wed May 17, 2006 11:09 pm    Post subject: Re: Access Panel for Outer Tank Filters Reply with quote

Mike:

I will work on the outer tank connection today. As soon as I have photos of the installation I will post them on my website.

Thx, Martin


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Martin Pohl
Zodiac XL QBK
8645 Jona, Switzerland
http://www.pohltec.ch/ZodiacXL/Main.html
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Martin Pohl



Joined: 30 Jan 2006
Posts: 118
Location: CH-8645 Jona SG, Switzerland

PostPosted: Thu May 18, 2006 3:51 am    Post subject: Re: Access Panel for Outer Tank Filters Reply with quote

I just checked the space between nose ribs #5 and #6 (approx. 0.4 inch). It is hardly possible to install an access panel that also gives access to and allows changing of the finger filter. In my opinion it is impossible to change the finger screen at the outer tanks without removing the tank.

Well, how often does it happen that you have to change finger screen filters? It would be probably easier to flush the fuel line/finger screen/outer tank in a reverse way with water or so (for cleaning of the finger screen, after a certain amount of flight time).

Rgds
Martin


- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List

_________________
Martin Pohl
Zodiac XL QBK
8645 Jona, Switzerland
http://www.pohltec.ch/ZodiacXL/Main.html
Back to top
View user's profile Send private message Send e-mail Visit poster's website
tonyplane(at)bellsouth.ne
Guest





PostPosted: Thu May 18, 2006 5:33 am    Post subject: Access Panel for Outer Tank Filters Reply with quote

I found the below in my "archives". I also believe I asked Nick at Zenith
about the lack of an access panel for the outboard aux tanks and received
the same reply, but could not find his reply. After studying the access
cover size, I figured it was marginal for any maintenance function and
possibly impossible to use. I did not install the finger screen access
covers for either inboard or outboard tanks.

Tony Graziano

Aux tanks, dual sticks/brakes, wing lockers, lights, 6x600
wheels/tires/brakes/nosefork, aileron trim

601XL, N493TG, 96 hrs..

From: "The Minearts" <smineart(at)kdsi.net>
Subject: fingerscreen access 601xl



Here's 2c worth about providing access to the fingerscreen ( fuel tank
outlet)
through the LE skin. If you want to put in the cover with its nutplates as
shown on the plans, leave a rivet-free zone when drilling the skin to the
noseribs
NR-3 & 4. It's not mentioned in the manual, and I had already drilled the
holes when I discovered it. ZAC doesn't have this on their demo ship, but
added
it to meet anticipated LSA requirements. I decided to cut the hole, and made
a cover to be riveted on with the skin.
FWIW,
Steve Mineart, N164SM
601XL, tail, L-wing 90%

Quote:
Time: 08:07:58 AM PST US
Subject: Access Panel for Outer Tank Filters
From: "Martin Pohl" <mpohl(at)pohltec.ch>



Hi

To all the 4-tank-Zodiac XL-builders: Did you install access panels at the
tank

Quote:
outlets for the outer tanks (to get access to the connection and the tank
filter)?

Quote:
The space between nose rib #5 and #6 is rather limited (1/2 " approx.)...

On Zenith's plans are only access panels for the inner tanks.

Any advice?

Rgds
Martin

--------
Martin Pohl
Zodiac XL QBK
8645 Jona, Switzerland



- The Matronics Zenith-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Zenith-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group