 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
captainron1(at)cox.net
Guest
|
 Posted: Sat Sep 03, 2011 5:57 pm Post subject: Strobe Light |
 |
|
Anyone got any experience with the FS 4400 strobe?
I bought one years ago finally had installed, the bulb lasted 5 hours at best estimate. I can't find any data on bulb longevity. It could be that the long storage and jostling around may be a factor in such a short life expectancy, but at 40 bucks including shipping it$ not looking like a good deal long term.
Ron (at) KFHU
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
 |
rickofudall
Joined: 19 Sep 2009
Posts: 1392
Location: Udall, KS, USA
|
| Posted: Sat Sep 03, 2011 7:04 pm Post subject: Strobe Light |
|
|
Ron, From what I've learned, the fragile element in a strobe system is usually the capacitor(s) used for the rapid charging and discharging. Are you absolutely sure it's the bulb?
Rick Girard
On Sat, Sep 3, 2011 at 8:55 PM, Ron (at) KFHU <captainron1(at)cox.net (captainron1(at)cox.net)> wrote:
| Quote: | --> Kolb-List message posted by: "Ron (at) KFHU" <captainron1(at)cox.net (captainron1(at)cox.net)>
Anyone got any experience with the FS 4400 strobe?
I bought one years ago finally had installed, the bulb lasted 5 hours at best estimate. I can't find any data on bulb longevity. It could be that the long storage and jostling around may be a factor in such a short life expectancy, but at 40 bucks including shipping it$ not looking like a good deal long term.
Ron (at) KFHU
===========
arget="_blank">http://www.matronics.com/Navigator?Kolb-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
The smallest miracle right in front of you is enough to make you happy.... |
|
| Back to top |
|
|
captainron1(at)cox.net
Guest
|
| Posted: Sun Sep 04, 2011 8:58 am Post subject: Strobe Light |
|
|
I am (guessing) pretty sure as I see no filament and I run an ohm meter across the prongs and it showed nothing. Those things do have a filament right? its not some fancy gas plasma gizmo. I don't remember what it looked like before I had it mounted kinda expected it to last at least 10 years or so.
I'll try to upload a close up photo of it a bit later as it is sitting by the other computer. I can still cancel my order with aircraft spruce it ain't shipped yet.
Ron (at) KFHU
---- Richard Girard <aslsa.rng(at)gmail.com> wrote:
=============
Ron, From what I've learned, the fragile element in a strobe system is
usually the capacitor(s) used for the rapid charging and discharging. Are
you absolutely sure it's the bulb?
Rick Girard
On Sat, Sep 3, 2011 at 8:55 PM, Ron (at) KFHU <captainron1(at)cox.net> wrote:
| Quote: |
Anyone got any experience with the FS 4400 strobe?
I bought one years ago finally had installed, the bulb lasted 5 hours at
best estimate. I can't find any data on bulb longevity. It could be that the
long storage and jostling around may be a factor in such a short life
expectancy, but at 40 bucks including shipping it$ not looking like a good
deal long term.
Ron (at) KFHU
|
--
Zulu Delta
Mk IIIC
Thanks, Homer GBYM
It isn't necessary to have relatives in Kansas City in order to be unhappy.
- Groucho Marx
--
kugelair.com
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Mike Welch
Joined: 13 Feb 2011
Posts: 272
|
| Posted: Sun Sep 04, 2011 9:14 am Post subject: Strobe Light |
|
|
Ron,
Yes, it is supposed to have a filament. I have two strobe units (left wing tip and right). Good one has the filament, burned out one
doesn't. Luckily, I have two sets of Nav Lights (an extra set), so I swapped flash strobe bulbs. Now they both work.
Mike Welch
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
lcottrell
Joined: 29 May 2006
Posts: 1494
Location: Jordan Valley, Or
|
| Posted: Sun Sep 04, 2011 11:35 am Post subject: Strobe Light |
|
|
You guy's should be talking to Dick Kuntzleman. I have a pair of his that has been in use for 5 years with no problems.
Larry
Note: If you forward this email, please delete the forwarding history, which includes my email address.
[quote] ---
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
do not archive |
|
| Back to top |
|
|
captainron1(at)cox.net
Guest
|
| Posted: Sun Sep 04, 2011 12:14 pm Post subject: Strobe Light |
|
|
Okay that's good, now if I can figure out who else sales these bulbs I guess I can get it for a fraction of the cost. I a, wondering about the probability of this being a custom bulb just for the FS1440.
I am gonna load up a photo and if someone recognizes this as a generic bulb for 5 bucks I'll owe him her a beer. I'd prefer a her but you know how it is.............
Ron (at) KFHU
---- Michael Welch <mdnanwelch7(at)hotmail.com> wrote:
=============
Ron,
Yes, it is supposed to have a filament. I have two strobe units (left wing tip and right). Good one has the filament, burned out one
doesn't. Luckily, I have two sets of Nav Lights (an extra set), so I swapped flash strobe bulbs. Now they both work.
Mike Welch
--
kugelair.com
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
322.92 KB |
| Viewed: |
14827 Time(s) |
|
| Description: |
|
| Filesize: |
286.76 KB |
| Viewed: |
14827 Time(s) |
|
| Description: |
|
| Filesize: |
284.82 KB |
| Viewed: |
14827 Time(s) |
|
| Description: |
|
| Filesize: |
355.07 KB |
| Viewed: |
14827 Time(s) |
|
|
|
| Back to top |
|
|
caflygirl
Joined: 01 Sep 2011
Posts: 8
Location: Livermore, CA
|
| Posted: Sun Sep 04, 2011 2:10 pm Post subject: Strobe Light |
|
|
I prefer wine coolers. 
Renee
Bas spellong blaned on ophone
On Sep 4, 2011, at 1:11 PM, "Ron (at) KFHU" <captainron1(at)cox.net> wrote:
| Quote: | Okay that's good, now if I can figure out who else sales these bulbs I guess I can get it for a fraction of the cost. I a, wondering about the probability of this being a custom bulb just for the FS1440.
I am gonna load up a photo and if someone recognizes this as a generic bulb for 5 bucks I'll owe him her a beer. I'd prefer a her but you know how it is.............
Ron (at) KFHU
---- Michael Welch <mdnanwelch7(at)hotmail.com> wrote:
=============
Ron,
Yes, it is supposed to have a filament. I have two strobe units (left wing tip and right). Good one has the filament, burned out one
doesn't. Luckily, I have two sets of Nav Lights (an extra set), so I swapped flash strobe bulbs. Now they both work.
Mike Welch
--
kugelair.com
<001.JPG>
<002.JPG>
<003.JPG>
<004.JPG>
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
captainron1(at)cox.net
Guest
|
| Posted: Sun Sep 04, 2011 4:46 pm Post subject: Strobe Light |
|
|
First you gotta come up with a bulb, smart stuff.
Ron (at) KFHU
=========================================
---- Renee <ulflygirl(at)mysky.us> wrote:
=============
I prefer wine coolers.
Renee
Bas spellong blaned on ophone
On Sep 4, 2011, at 1:11 PM, "Ron (at) KFHU" <captainron1(at)cox.net> wrote:
| Quote: | Okay that's good, now if I can figure out who else sales these bulbs I guess I can get it for a fraction of the cost. I a, wondering about the probability of this being a custom bulb just for the FS1440.
I am gonna load up a photo and if someone recognizes this as a generic bulb for 5 bucks I'll owe him her a beer. I'd prefer a her but you know how it is.............
Ron (at) KFHU
---- Michael Welch <mdnanwelch7(at)hotmail.com> wrote:
=============
Ron,
Yes, it is supposed to have a filament. I have two strobe units (left wing tip and right). Good one has the filament, burned out one
doesn't. Luckily, I have two sets of Nav Lights (an extra set), so I swapped flash strobe bulbs. Now they both work.
Mike Welch
--
kugelair.com
<001.JPG>
<002.JPG>
<003.JPG>
<004.JPG>
|
--
kugelair.com
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Richard Pike
Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee
|
| Posted: Sun Sep 04, 2011 8:14 pm Post subject: Re: Strobe Light |
|
|
Please do not post un-resized pictures. It makes it almost impossible to read the posts without scrolling back and forth, resizing the page, and other hoop-jumpings that would be unnecessary if the pictures were simply resized.
Thank you
Richard Pike
MKIII N420P (420ldPoops)
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0
Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing. |
|
| Back to top |
|
|
David d.
Joined: 04 Jul 2011
Posts: 60
Location: Fitzgerald Ga.
|
|
| Back to top |
|
|
captainron1(at)cox.net
Guest
|
| Posted: Mon Sep 05, 2011 6:42 am Post subject: Strobe Light |
|
|
Lol !!
I am as surprised about that Cinemascope photo as anyone else thats some giant pix. I wonder where is the setting to shrink the monsters.
I'll check the camera maybe its in there.
Ron (at) KFHU
do not archive
==============================
---- SS568 <david(at)PaulowniaTrees.com> wrote:
=============
Amen! to the super dyna whopper size picts.
For a while there I thought my C. had a bad wire in the pict. size area. [Laughing]
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=351456#351456
--
kugelair.com
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
undoctor
Joined: 21 Oct 2008
Posts: 212
Location: Bethelhem, PA
|
| Posted: Mon Sep 05, 2011 7:46 am Post subject: Strobe Light |
|
|
Here's the way I resize my photos. Click on Windows "Paint" icon to
open the program. At the top left corner there's a drop down control
tab, click on open. Select the original picture file. Click on
resize. Both dimensions show as 100, highlight one and change it to
about 35 - 40 amd click OK (the other dimension follows the changed
one). If the pic fits my screen I click the drop down tab and click
Save As. A number of files appear and I use jpg and name and save it to
the permanent file location. You can reduce a multiple MB file to a few
hundred KB. Smaller still if the photo comes up less than the computer
screen size.
Dave Kulp
Bethlehem, PA
FireFly 11DMK
On 9/5/2011 10:39 AM, Ron (at) KFHU wrote:
| Quote: |
Lol !!
I am as surprised about that Cinemascope photo as anyone else thats some giant pix. I wonder where is the setting to shrink the monsters.
I'll check the camera maybe its in there.
Ron (at) KFHU
do not archive
==============================
---- SS568<david(at)PaulowniaTrees.com> wrote:
=============
Amen! to the super dyna whopper size picts.
For a while there I thought my C. had a bad wire in the pict. size area. [Laughing]
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=351456#351456
--
kugelair.com
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Carolina Flyer
Joined: 03 Oct 2010
Posts: 62
Location: Buffalo, South Carolina
|
| Posted: Mon Sep 05, 2011 11:28 am Post subject: Re: Strobe Light |
|
|
Undoctor, I tried to do what you suggested using Paint but I couldn't find anywhere that showed (resize)
If you go to the Microsoft Website Windows Picture Re-sizer is there for Free, and it is a lot less work involved...... All you have to do is Right Click on the file and Click on ( Re-Size Pictures ) then you choose the size you want
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
Kolb Firestar II
503 C-Box / RK400
Soon to have a
Rotax 670 DCDI
with a C-Box and
RK 400 Clutch
Challenger II
503 Tall Drive
Location : Buffalo South Carolina |
|
| Back to top |
|
|
undoctor
Joined: 21 Oct 2008
Posts: 212
Location: Bethelhem, PA
|
| Posted: Mon Sep 05, 2011 12:21 pm Post subject: Strobe Light |
|
|
Resize is at the top left on the home tab. It's a column of crop,
resize, rotate. This program takes any file, like BMP which is a memory
hog, and you can save it in jpg. Do you know if you can do that with
the Windows resizer. Probably pretty similar since they're both
programs of MS Windows. The procedure is similar, open file, resize, save.
Your FireStar is going to be a hot rod like the FireFly w/447 is! When
are you getting it?
Dave
On 9/5/2011 3:28 PM, Carolina Flyer wrote:
| Quote: |
Undoctor, I tried to do what you suggested using Paint but I couldn't find anywhere that showed (resize)
If you go to the Microsoft Website Windows Picture Re-sizer is there for Free, and it is a lot less work involved...... All you have to do is Right Click on the file and Click on ( Re-Size Pictures ) then you choose the size you want
--------
Kolb Firestar II
503 C-Box / RK400
Soon to have a
Rotax 670 DCDI
with a C-Box and
RK 400 Clutch
Challenger II
503 Tall Drive
Location : Buffalo South Carolina
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=351489#351489
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Carolina Flyer
Joined: 03 Oct 2010
Posts: 62
Location: Buffalo, South Carolina
|
| Posted: Mon Sep 05, 2011 1:21 pm Post subject: Re: Strobe Light |
|
|
Dave,
I just got off the phone with Rotax Rick a few minutes ago. He is going to be building the 670 for me..... It is going to use a Exhaust like what is use on the 618's.......... The FireStar II is just about finished other than beefing up the cage for the 670, and I am installing a mount for my new Aveo PowerBurst Strobes........ These Strobes are Awesome and well worth the price of around $400.00 for the Pair
The 1st Picture is of the FireStar II as it is Now
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
| Description: |
|
| Filesize: |
100.96 KB |
| Viewed: |
14716 Time(s) |
|
| Description: |
|
| Filesize: |
332.3 KB |
| Viewed: |
14716 Time(s) |
|
_________________
Kolb Firestar II
503 C-Box / RK400
Soon to have a
Rotax 670 DCDI
with a C-Box and
RK 400 Clutch
Challenger II
503 Tall Drive
Location : Buffalo South Carolina |
|
| Back to top |
|
|
undoctor
Joined: 21 Oct 2008
Posts: 212
Location: Bethelhem, PA
|
| Posted: Mon Sep 05, 2011 2:16 pm Post subject: Strobe Light |
|
|
Bet you're getting antsy! Gonna be up before winter?
On 9/5/2011 5:21 PM, Carolina Flyer wrote:
| Quote: |
Dave,
I just got off the phone with Rotax Rick a few minutes ago. He is going to be building the 670 for me..... It is going to use a Exhaust like what is use on the 618's.......... The FireStar II is just about finished other than beefing up the cage for the 670, and I am installing a mount for my new Aveo PowerBurst Strobes........ These Strobes are Awesome and well worth the price of around $400.00 for the Pair
The 1st Picture is of the FireStar II as it is Now
--------
Kolb Firestar II
503 C-Box / RK400
Soon to have a
Rotax 670 DCDI
with a C-Box and
RK 400 Clutch
Challenger II
503 Tall Drive
Location : Buffalo South Carolina
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=351495#351495
Attachments:
http://forums.matronics.com//files/picture_005_large_149.jpg
http://forums.matronics.com//files/new_strobe1_171.jpg
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
Bill Long
Joined: 06 Apr 2010
Posts: 19
|
| Posted: Mon Sep 05, 2011 4:25 pm Post subject: Strobe Light |
|
|
what if you need to resize video? I can't watch my HD video on my PC.
From: Robert Laird <rlaird(at)cavediver.com>
To: kolb-list(at)matronics.com
Sent: Mon, September 5, 2011 4:48:44 PM
Subject: Re: Re: Strobe Light
There is also a web-based on-line photo editor: http://www.aviary.com/ which allows resizing.
On Mon, Sep 5, 2011 at 2:28 PM, Carolina Flyer <joe.a.lawson(at)gmail.com (joe.a.lawson(at)gmail.com)> wrote:
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
ceengland(at)bellsouth.ne
Guest
|
| Posted: Mon Sep 05, 2011 4:41 pm Post subject: Strobe Light |
|
|
If you're still running Windows xp, there's an even simpler method than
the Image Resizer program (that I used for a long time).
Find the photo file you want to attach (using Windows Explorer or any
other file manager you like). Point at the file with your mouse, and
right-click. You'll get a popup menu. Find 'send to', and hover over
that with your mouse. You'll get a second popup menu; on that one,
left-click on 'mail recipient.' Windows will ask if you want smaller
images, and give you a choice (even 'large' will only be around 150kb,
max). Windows will then create a new email in your mail software with
the file attached; you just fill in the address, subject, etc.
This sounds complicated, but only takes about 3 seconds to do.
I'd check for you on Vista, too, but my Vista system is down in the
hangar & I'm not.
Charlie
On 09/05/2011 03:17 PM, David Kulp wrote:
| Quote: |
Resize is at the top left on the home tab. It's a column of crop,
resize, rotate. This program takes any file, like BMP which is a
memory hog, and you can save it in jpg. Do you know if you can do
that with the Windows resizer. Probably pretty similar since they're
both programs of MS Windows. The procedure is similar, open file,
resize, save.
Your FireStar is going to be a hot rod like the FireFly w/447 is!
When are you getting it?
Dave
On 9/5/2011 3:28 PM, Carolina Flyer wrote:
>
> Flyer"<joe.a.lawson(at)gmail.com>
>
> Undoctor, I tried to do what you suggested using Paint but I couldn't
> find anywhere that showed (resize)
>
> If you go to the Microsoft Website Windows Picture Re-sizer is there
> for Free, and it is a lot less work involved...... All you have to do
> is Right Click on the file and Click on ( Re-Size Pictures ) then you
> choose the size you want
>
> --------
> Kolb Firestar II
> 503 C-Box / RK400
> Soon to have a
> Rotax 670 DCDI
> with a C-Box and
> RK 400 Clutch
>
> Challenger II
> 503 Tall Drive
>
> Location : Buffalo South Carolina
|
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
John Hauck
Joined: 09 Jan 2006
Posts: 4639
Location: Titus, Alabama (hauck's holler)
|
| Posted: Tue Sep 06, 2011 2:43 pm Post subject: Strobe Light |
|
|
You guy's should be talking to Dick Kuntzleman. I have a pair of his that has been in use for 5 years with no problems.
Larry
| Quote: | | Dick makes good stuff. I have Whelen Strobe/Nav Lights. Been on the airplane about 19 years and 3,100+ hours. Whelen is like David Clark, expensive, but they stand behind their products and willingly repair and turn them around quickly. Before I flew my MKIII I blew an internal fuse or something inside the power supply for the Whelen setup. Told the Whelen folks what I had done (reverse polarity while seeing if they really worked). Whelen fixed my box and shipped it back to me with no charges. Side note: It is important to operate the Whelen system about once a month or so. If you let it sit idle too long the capacitors go belly up for some reason. |
0123
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
_________________
John Hauck
MKIII/912ULS
hauck's holler
Titus, Alabama |
|
| Back to top |
|
|
beauford
Joined: 25 Apr 2007
Posts: 127
Location: Brandon, FL
|
| Posted: Tue Sep 06, 2011 3:44 pm Post subject: Strobe Light |
|
|
Agree completely… My Kuntzleman 103 unit has been running well over nine years… zero problems… He is known for “overbuilding” his stuff… and
standing 100% behind it if there is a defect. His products are significantly less expensive than comparable units from the big outfits…
Worth what ye paid fer it…
Satisfied beauford
FF-076
Brandon, FL
From: owner-kolb-list-server(at)matronics.com [mailto:owner-kolb-list-server(at)matronics.com] On Behalf Of John Hauck
Sent: Tuesday, September 06, 2011 6:42 PM
To: kolb-list(at)matronics.com
Subject: RE: Strobe Light
You guy's should be talking to Dick Kuntzleman. I have a pair of his that has been in use for 5 years with no problems.
Larry
| Quote: | | Dick makes good stuff.john hmkIIIEscalante, UT |
[quote][b]
| | - The Matronics Kolb-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kolb-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
