Matronics Email Lists :: View topic - AeroLed landing lights not working with wig wag relay

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

AeroLed landing lights not working with wig wag relay

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Helidesigner

Joined: 08 Sep 2011
Posts: 3

Posted: Fri Sep 09, 2011 3:56 am Post subject: AeroLed landing lights not working with wig wag relay

I purchased the B&C wig wag relay and wired it according to the schematic for an off-on-on switch and B&C diode assembly. The wig-wag is in the middle position. I included the resistors  between the relay and ground shown in the updated schematic. The system works fine with incandecent nav lights but not with the LED landing lights. Only one LED light turns on in wig wag mode and both lights turn on in continuous on mode. The nav lights draw about 3.2 amps, the LED lights about 3.7 amp. Anyone know what is going on here and how to fix it. Should I just purchase an electronic wig wag unit designed for LED's?

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Thanks

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum