 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
toaster73(at)embarqmail.c
Guest
|
 Posted: Wed Sep 14, 2011 5:46 pm Post subject: Dash board edge trim |
 |
|
I am finalizing the plane for weight and balance and making sure I have done everything I want to do. I am wondering what folks have done to soften the edge of the dash (the aft edge of the F-1071 FWD fuse top skin). I do not want to do anything too fancy but simple and quick but nice looking. I noticed the Van's RV-10 has automotive type fuel line split down the middle and slipped over the edge, which is ok, I guess, but I would like a slight step above that solution.
Thanks
Chris Lucas
#40072
N919AR
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
 |
rene(at)felker.com
Guest
|
| Posted: Wed Sep 14, 2011 6:22 pm Post subject: Dash board edge trim |
|
|
This is what I used….can’t remember how long….
http://www.cleavelandtoolstore.com/prodinfo.asp?number=GSF12
Rene'
801-721-6080
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris
Sent: Wednesday, September 14, 2011 7:42 PM
To: rv10-list(at)matronics.com
Subject: Dash board edge trim
I am finalizing the plane for weight and balance and making sure I have done everything I want to do. I am wondering what folks have done to soften the edge of the dash (the aft edge of the F-1071 FWD fuse top skin). I do not want to do anything too fancy but simple and quick but nice looking. I noticed the Van's RV-10 has automotive type fuel line split down the middle and slipped over the edge, which is ok, I guess, but I would like a slight step above that solution.
Thanks
Chris Lucas
#40072
N919AR | Quote: | | http://www.matronics.com/Navigator?RV10-List |
01234567
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rleffler
Joined: 05 Nov 2006
Posts: 680
|
| Posted: Wed Sep 14, 2011 6:22 pm Post subject: Dash board edge trim |
|
|
Aircraft Door Seals will custom make a glareshield to your template. I had one in my Cherokee and really liked it. It has a nice padded brow. I’m thinking about doing the same in my RV-10. I think it looks nicer that the cloth that Abby sells. But again, that’s my opinion.
[url=javascript:;][img]cid:image001.jpg(at)01CC732B.6FAE1790[/img][/url]
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris
Sent: Wednesday, September 14, 2011 9:42 PM
To: rv10-list(at)matronics.com
Subject: Dash board edge trim
I am finalizing the plane for weight and balance and making sure I have done everything I want to do. I am wondering what folks have done to soften the edge of the dash (the aft edge of the F-1071 FWD fuse top skin). I do not want to do anything too fancy but simple and quick but nice looking. I noticed the Van's RV-10 has automotive type fuel line split down the middle and slipped over the edge, which is ok, I guess, but I would like a slight step above that solution.
Thanks
Chris Lucas
#40072
N919AR | Quote: | | http://www.matronics.com/Navigator?RV10-List |
01234567
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
109.28 KB |
| Viewed: |
5345 Time(s) |
|
_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler |
|
| Back to top |
|
|
ricksked(at)cox.net
Guest
|
| Posted: Wed Sep 14, 2011 7:10 pm Post subject: Dash board edge trim |
|
|
Get with Abby from flightline interiors. She has a great glareshield cover and edge.
RickRV-10 x 2
RV Central Las Vegas
Sent from my iPhone
On Sep 14, 2011, at 7:18 PM, "Rene" <rene(at)felker.com (rene(at)felker.com)> wrote:
[quote]
This is what I used….can’t remember how long….
http://www.cleavelandtoolstore.com/prodinfo.asp?number=GSF12
Rene'
801-721-6080
From: owner-rv10-list-server(at)matronics.com (owner-rv10-list-server(at)matronics.com) [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Chris
Sent: Wednesday, September 14, 2011 7:42 PM
To: [url=mailto:rv10-list(at)matronics.com]rv10-list(at)matronics.com (rv10-list(at)matronics.com)[/url]
Subject: Dash board edge trim
I am finalizing the plane for weight and balance and making sure I have done everything I want to do. I am wondering what folks have done to soften the edge of the dash (the aft edge of the F-1071 FWD fuse top skin). I do not want to do anything too fancy but simple and quick but nice looking. I noticed the Van's RV-10 has automotive type fuel line split down the middle and slipped over the edge, which is ok, I guess, but I would like a slight step above that solution.
Thanks
Chris Lucas
#40072
N919AR01234567
8
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
pitts_pilot(at)bellsouth.
Guest
|
| Posted: Thu Sep 15, 2011 9:20 am Post subject: Dash board edge trim |
|
|
You might try the automotive door edge trim ..... comes in colors too.
Linn
On 9/14/2011 9:42 PM, Chris wrote: [quote] <![endif]--> <![endif]-->
I am finalizing the plane for weight and balance and making sure I have done everything I want to do. I am wondering what folks have done to soften the edge of the dash (the aft edge of the F-1071 FWD fuse top skin). I do not want to do anything too fancy but simple and quick but nice looking. I noticed the Van's RV-10 has automotive type fuel line split down the middle and slipped over the edge, which is ok, I guess, but I would like a slight step above that solution.
Thanks
Chris Lucas
#40072
N919AR
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
larkrv10(at)yahoo.ca
Guest
|
| Posted: Thu Sep 15, 2011 11:50 am Post subject: Dash board edge trim |
|
|
Years ago we replaced our glareshield cover when we replaced the windshield in our Cardinal, with a piece of leather we bought. After having a friend cut and sew it to the proper shape, we then glued it down. All in all a bad idea, as the leather shrunk, and we ended up ripping it all out for a commercially made cover anyway.
Rick
#40956
Southampton, Ont
--- On Thu, 9/15/11, Rick <ricksked(at)cox.net> wrote:
| Quote: |
From: Rick <ricksked(at)cox.net>
Subject: Re: Dash board edge trim
To: "rv10-list(at)matronics.com" <rv10-list(at)matronics.com>
Received: Thursday, September 15, 2011, 3:07 AM
Get with Abby from flightline interiors. She has a great glareshield cover and edge.
Rick RV-10 x 2
RV Central Las Vegas
Sent from my iPhone
On Sep 14, 2011, at 7:18 PM, "Rene" <rene(at)felker.com (rene(at)felker.com)> wrote:
9
|
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
johngoodman
Joined: 18 Sep 2006
Posts: 530
Location: GA
|
| Posted: Fri Sep 16, 2011 9:03 am Post subject: Re: Dash board edge trim |
|
|
I got some rubber edge trim from McMaster-Carr. Here is a link:
http://www.mcmaster.com/#trim-molding/=e37ooh
As far as the covering on the glareshield, I painted the metal flat black. So far it has held up great. For the avionics vent fans, I went with some 80mm computer fans with a flush grill cover, that double as defoggers.
John
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
#40572 Phase One complete in 2011 |
|
| Back to top |
|
|
rv10rob(at)gmail.com
Guest
|
| Posted: Fri Sep 16, 2011 9:23 am Post subject: Dash board edge trim |
|
|
Same here--flat black paint looks great. I used the Cleveland ending. I did not add a vent/defrost fan, which is my biggest regret thus far. It's way too hot behind the panel.
-Rob
80 hours
On Fri, Sep 16, 2011 at 10:03 AM, johngoodman <johngoodman(at)earthlink.net (johngoodman(at)earthlink.net)> wrote:
| Quote: | --> RV10-List message posted by: "johngoodman" <johngoodman(at)earthlink.net (johngoodman(at)earthlink.net)>
I got some rubber edge trim from McMaster-Carr. Here is a link:
http://www.mcmaster.com/#trim-molding/=e37ooh
As far as the covering on the glareshield, I painted the metal flat black. So far it has held up great. For the avionics vent fans, I went with some 80mm computer fans with a flush grill cover, that double as defoggers.
John
--------
#40572 First flight was on 25 June, 2011
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=352468#352468
===========
arget="_blank">http://www.matronics.com/Navigator?RV10-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
|
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
toaster73(at)embarqmail.c
Guest
|
| Posted: Fri Sep 16, 2011 11:02 am Post subject: Dash board edge trim |
|
|
John,
Sounds good, I too have flat black paint and 2 fans, do you know what exact Mcmaster part number you got, the link just takes me to the many choices.
Thanks
Chris
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
drfred(at)suddenlinkmail.
Guest
|
| Posted: Fri Sep 16, 2011 11:06 am Post subject: Dash board edge trim |
|
|
I used the flat black paint and the edge cover and it has worked well for me.
Make sure you put in black fan grill covers! Don't use the shiny ones or you will have the reflection in your windshield. Don't ask me how I know.......
Dr Fred.
[quote][b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
dmaib(at)mac.com
Guest
|
| Posted: Fri Sep 16, 2011 11:31 am Post subject: Dash board edge trim |
|
|
I too painted the panel top flat back and could not be happier with
it. I used some trim from an auto parts store that looks pretty much
like the far right choice in the top row of John's link. I also used
the same trim for my wing-to-fuselage gap and it has worked great,
David Maib
40559 Flying
just turned over 400 hours.
On Sep 16, 2011, at 2:55 PM, Chris wrote:
[quote]
John,
Sounds good, I too have flat black paint and 2 fans, do you know
what exact Mcmaster part number you got, the link just takes me to
the many choices.
Thanks
Chris
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
johngoodman
Joined: 18 Sep 2006
Posts: 530
Location: GA
|
| Posted: Fri Sep 16, 2011 2:32 pm Post subject: Re: Dash board edge trim |
|
|
Chris,
The one I ordered was Style 6, 8507K15 - 6 feet. But, a lot of the others will fit as well. Since you are already there, take a look at 1120A411. That's the stuff I used for the door edge trim - I love it.
John
| toaster73(at)embarqmail.c wrote: | John,
Sounds good, I too have flat black paint and 2 fans, do you know what exact Mcmaster part number you got, the link just takes me to the many choices.
Thanks
Chris
--- |
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
#40572 Phase One complete in 2011 |
|
| Back to top |
|
|
arplnplt(at)gmail.com
Guest
|
| Posted: Fri Sep 16, 2011 7:25 pm Post subject: Dash board edge trim |
|
|
I used black spray on truck bed liner for my dash. Very tough and has a nice textured finish.
Dave Leikam
On Sep 16, 2011, at 1:55 PM, Chris wrote:
[quote]
John,
Sounds good, I too have flat black paint and 2 fans, do you know what exact Mcmaster part number you got, the link just takes me to the many choices.
Thanks
Chris
---
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
