Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Fuel Filler Tube

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

tonyrenshaw268(at)gmail.c
Guest

Posted: Thu Sep 29, 2011 12:29 pm Post subject: Fuel Filler Tube

Gidday,

I'm working on attaching the cobra filler tube to the fuse, and am wondering if there is a strategy to use a thin layer of rubber between the tube and the BID strapping, so that it is held in position, and yet only attached at the filler end? I have done the work to isolate the loads with balsa sandwiched between BID and so it might be overkill, but I'd like to hear others views. If there is a smart way to get the redux in around the cap throat, so that it makes a nice seal, I'd appreciate it. The book method seems not the best way, and I am wondering about injecting the redux, and possibly making up a rubber gasket to go in first, and allow the redux to accumulate behind and completely fill the void. Must be a way to get an absolutely perfect seal.

Reg

Tony Renshaw

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum