Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Toyota (denso) alternator

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
jgamtmann2(at)gmail.com
Guest





PostPosted: Fri Oct 14, 2011 7:35 am    Post subject: Toyota (denso) alternator Reply with quote

I am using an internally regulated Toyota (Denso) alternator on my RV6.  It has the normal B+ charging lead and a plug with 3 spade connectors.  One is for the light, one for sense and one labeled IGN that supplies 12V to energize the alternator before it starts running.  Can anyone tell me what happens to the output of this alternator if the IGN wire is disconnected during flight (i.e. while the alternator is running)?  I have my alternator switch in this IGN line to take the alternator Off Line, but something tells me this is not a good idea and that the alternator output may run away.   

Regards, Jürgen Amtmann
[quote][b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
nuckolls.bob(at)aeroelect
Guest





PostPosted: Fri Oct 14, 2011 8:31 am    Post subject: Toyota (denso) alternator Reply with quote

At 10:30 AM 10/14/2011, you wrote:
I am using an internally regulated Toyota (Denso)
alternator on my RV6. It has the normal B+
charging lead and a plug with 3 spade
connectors. One is for the light, one for sense
and one labeled IGN that supplies 12V to energize
the alternator before it starts running. Can
anyone tell me what happens to the output of this
alternator if the IGN wire is disconnected during
flight (i.e. while the alternator is running)? I
have my alternator switch in this IGN line to
take the alternator Off Line, but something tells
me this is not a good idea and that the alternator output may run away.

Regards, Jürgen Amtmann

The risks of uncontrollable runaway for internally
regulated alternators is very low but not zero.
Commercial offerings of automotive conversions for
aircraft either modify the alternator for EXTERNAL
regulation and OV protection (a la B&C) or get
modified to accept external OV protection (a la
Plane-Power).

No doubt there are thousands of internally regulated
alternators flying without ov protection that have
never experienced a runaway failure . . . but there
have been a few . . . with predictable results.

The choice is yours.


Bob . . .


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group