 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
tonyrenshaw268(at)gmail.c
Guest
|
 Posted: Wed Oct 19, 2011 12:55 pm Post subject: Aluminium Fuel Tube |
 |
|
Hey Graham, I'm well underway with my cobra attachment but need to sort out the venting before I bond it in. I have a sight gauge and the normal vent to plumb into the cobra. I have the black grommets fittings, the ones you install in a hole in the cobra wall and then push a barb through with an elbow fitting. Pity it doesnt come with a T piece, which would stop me having to install two, have you any specific suggestions as others have said you have a mod, I havent heard of it unless it is the new standard up and over one, hope alls well with you two,
Reg
Tony Renshaw
Sent from my iPad
On 21/09/2011, at 8:52 PM, GRAHAM SINGLETON <grahamsingleton(at)btinternet.com (grahamsingleton(at)btinternet.com)> wrote:
[quote]Tony
Tim's aluminium elbow is highly recommended, it stops a lot of the fuel smell in the cockpit, but make sure all the molding flash is carefully cut off the Cobra so that the rubber tube jopints sit snuggly and seal to the Cobra, and the tank stub
Graham
From: Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)>
To: tonyrenshaw268(at)optusnet.com.au (tonyrenshaw268(at)optusnet.com.au); [url=mailto:europa-list(at)matronics.com]europa-list(at)matronics.com (europa-list(at)matronics.com)[/url]
Sent: Wednesday, 21 September, 2011 10:56:45
Subject: Aluminium Fuel Tube
Tony,
See attachment in fixing the aluminium pipe supplied by me.
It is purposely too long to allow for different fittings.
Position the “cobra” first with your splash moulding.
Don’t forget to reinforce the skin behind the cobra moulding with 3 layers of Bid to prevent deforming skin in hot temperatures (Aussie)
Cut it, the pipe, gradually back , a little at a time until you have the correct fit.
The rubber piping at each end allows for mistakes.
Once it is joined up then do the lay ups to the wall for the cobra.
Puts some blue foam at the back of the cobra to allow for the shape and expansion.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand
Ph; 03 3515166
Mob; 0210640221
email; [url=mailto:ward.t(at)xtra.co.nz]ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)[/url]
[b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
grahamsingleton(at)btinte
Guest
|
| Posted: Wed Oct 19, 2011 3:53 pm Post subject: Aluminium Fuel Tube |
|
|
I use AN fittings, not sure about rubber gromets. Wikk they degrade in Mogas?
We're fine thanks, off to Turkey for a week 31st. Hope the Palestinians aren't near where we're going!
Graham
GRaham
From: Tony Renshaw <tonyrenshaw268(at)gmail.com>
To: "europa-list(at)matronics.com" <europa-list(at)matronics.com>
Sent: Wednesday, 19 October, 2011 21:51:40
Subject: Re: Europa-List: Aluminium Fuel Tube
Hey Graham, I'm well underway with my cobra attachment but need to sort out the venting before I bond it in. I have a sight gauge and the normal vent to plumb into the cobra. I have the black grommets fittings, the ones you install in a hole in the cobra wall and then push a barb through with an elbow fitting. Pity it doesnt come with a T piece, which would stop me having to install two, have you any specific suggestions as others have said you have a mod, I havent heard of it unless it is the new standard up and over one, hope alls well with you two,
Reg
Tony Renshaw
Sent from my iPad
On 21/09/2011, at 8:52 PM, GRAHAM SINGLETON <grahamsingleton(at)btinternet.com (grahamsingleton(at)btinternet.com)> wrote:
| Quote: | Tony
Tim's aluminium elbow is highly recommended, it stops a lot of the fuel smell in the cockpit, but make sure all the molding flash is carefully cut off the Cobra so that the rubber tube jopints sit snuggly and seal to the Cobra, and the tank stub
Graham
From: Tim Ward <ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)>
To: tonyrenshaw268(at)optusnet.com.au (tonyrenshaw268(at)optusnet.com.au); (europa-list(at)matronics.com)europa-list(at)matronics.com (europa-list(at)matronics.com)
Sent: Wednesday, 21 September, 2011 10:56:45
Subject: Europa-List: Aluminium Fuel Tube
Tony,
See attachment in fixing the aluminium pipe supplied by me.
It is purposely too long to allow for different fittings.
Position the “cobra” first with your splash moulding.
Don’t forget to reinforce the skin behind the cobra moulding with 3 layers of Bid to prevent deforming skin in hot temperatures (Aussie)
Cut it, the pipe, gradually back , a little at a time until you have the correct fit.
The rubber piping at each end allows for mistakes.
Once it is joined up then do the lay ups to the wall for the cobra.
Puts some blue foam at the back of the cobra to allow for the shape and expansion.
Cheers,
Tim
Tim Ward,
12 Waiwetu Street,
Fendalton,
Christchurch 8052
New Zealand
Ph; 03 3515166
Mob; 0210640221
email; (ward.t(at)xtra.co.nz)ward.t(at)xtra.co.nz (ward.t(at)xtra.co.nz)
http://www======================
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
| Filesize: |
95 KB |
| Viewed: |
1331 Time(s) |
|
| Description: |
|
| Filesize: |
38.8 KB |
| Viewed: |
1331 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
