Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Kolb MKIII video

Matronics Email Lists Forum Index -> Kolb-List

View previous topic :: View next topic

Author Message

Richard Pike

Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee

Posted: Tue Oct 25, 2011 8:50 pm Post subject: Kolb MKIII video

Had a perfect evening to fly, and the video turned out good. This is intended to be a motivational video. If you are thinking about building and flying a Kolb, this is what it is like.



If you are already building a Kolb, and it is not done yet  - then you need to get your rear in gear and get it done so you can be doing this.



If you already have a Kolb and you are not doing this - WHAT IS WRONG WItH YOU?!?!?



http://www.youtube.com/watch?v=w2SeONVmlB8



(Please watch full screen & HD 720P)

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

ces308

Joined: 03 Nov 2008
Posts: 317
Location: houghton lake ,mi

Posted: Wed Oct 26, 2011 2:49 am Post subject: Re: Kolb MKIII video

Nice video,Richard ! These are the hills in Tennessee ??  Looks like Vermont too ! I enjoyed it ! Thanks for posting ! 



chris ambrose

M3X/Jabiru

N327CS

tkben002

Joined: 06 Jul 2011
Posts: 54
Location: Alexandria, LA

Posted: Wed Oct 26, 2011 4:48 pm Post subject: Re: Kolb MKIII video

Nice video, I wish I had some scenery like that around here.  Is it normally that quiet in your cabin.  It sounds like you could hold a conversation and the engine noise would not be that bad.  In mine it is so loud you can hardly hear yourself think.



Travis Bennett

ces308

Joined: 03 Nov 2008
Posts: 317
Location: houghton lake ,mi

Posted: Wed Oct 26, 2011 5:03 pm Post subject: Re: Kolb MKIII video

Travis....



LOL   Don't be fooled by the video....IT IS NOISY in there ! lol



chris ambrose

pj.ladd(at)btinternet.com
Guest

Posted: Thu Oct 27, 2011 1:21 am Post subject: Kolb MKIII video

In mine it is so loud you can hardly hear yourself think.>>



All Kolbs are noisy. It is a feature of pushers I think. Certainly my Xtra 

with the Jabi is markedly noisier than the Eurostar with a Jabi which I had 

a share in. That was a tractor, admittedly cowled but like a sewing machine 

in comparison.

In fact I saw somewhere that Rutan gave up designing pushers because it was 

impossible to get the noise down.



Cheers



Pat

ces308

Joined: 03 Nov 2008
Posts: 317
Location: houghton lake ,mi

Posted: Thu Oct 27, 2011 1:34 am Post subject: Re: Kolb MKIII video

Pat,all...



Last weekend I was near Grr International airport and I heard this noise aloft and low and behold it was a Piagio Avanti ,twin pusher flying over and it sound like and pair of (high HP ) Kolbs flying over ..lol   and I think that Rutan artical was in Flying a couple months ago....  just no way to quiet them down....



chris ambrose

M3X/Jabiru A-2200

N327CS

simonnelson(at)vodamail.c
Guest

Posted: Thu Oct 27, 2011 1:48 am Post subject: Kolb MKIII video

Its because of the air coming over th wing and hitting the prop, casing slap as in helicopters.

Same problem with models.

Sy

---

pj.ladd(at)btinternet.com
Guest

Posted: Thu Oct 27, 2011 3:36 am Post subject: Kolb MKIII video

Same problem with models.>>



Now that is interesting. I had no idea.



 The whup whup sound you get from helicopter blades is also exactly similar 

to a thrown boomerang

Cheers



Pat

simonnelson(at)vodamail.c
Guest

Posted: Thu Oct 27, 2011 3:55 am Post subject: Kolb MKIII video

Yup, the dirty air off the wing does not go in 'clean - smooth' to the prop unlike the air at the top.

Pain in the butt, when trying to fly a VERY fast delta pusher model quietly.

Actually I have had better, er quieter with a laminar section and better flow control around the root and motor. Also you can move the prop further away, but your fin will get a tad nervous on your Kolb!



Sy

---

Richard Pike

Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee

Posted: Sun Oct 30, 2011 2:24 pm Post subject: Re: Kolb MKIII video

Finally figured out how to edit the video so I could add sound to it. Everybody has different musical tastes, but this is how I like it.



http://www.bcchapel.org/MESF/October%20Kolb.html



PS: the second clip might have you scratching your heads, but  I am just east of Hiltons, Virginia, and the square gray building on the left is the Carter Fold, home place for A.P Carter, and (as you hard core country music fans will know) that is their signature song.

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

slyck(at)frontiernet.net
Guest

Posted: Sun Oct 30, 2011 3:28 pm Post subject: Kolb MKIII video

bad link?

BB



On 30, Oct 2011, at 6:24 PM, Richard Pike wrote:



 	  Quote: 	
		   

 

 Finally figured out how to edit the video so I could add sound to it. Everybody has different musical tastes, but this is how I like it.

 

 http://www.bcchapel.org/MESF/October%20Kolb.html

 

 PS: the second clip might have you scratching your heads, but  I am just east of Hiltons, Virginia, and the square gray building on the left is the Carter Fold, home place for A.P Carter, and (as you hard core country music fans will know) that is their signature song.

 

 --------

 Richard Pike

 Kolb MKIII N420P (420ldPoops)

 richard (at) bcchapel(dot)org

 Kingsport, TN 3TN0

 Now faith is the substance of things hoped for, the evidence of things not seen. 

 Hebrews 11:1

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=356354#356354

Richard Pike

Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee

Posted: Sun Oct 30, 2011 3:59 pm Post subject: Re: Kolb MKIII video

[quote="slyck(at)frontiernet.net"]bad link?

BB

[quote] 

 

Shouldn't be, but go here:



http://www.bcchapel.org/MESF/3TN0.html



And go to the bottom of the page and click on the appropriate link -

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

George Alexander

Joined: 10 Jan 2006
Posts: 245
Location: SW Florida

Posted: Sun Oct 30, 2011 4:07 pm Post subject: Re: Kolb MKIII video

 	  slyck(at)frontiernet.net wrote: 	
		  bad link?

BB



	




Worked great from here.  Music added a lot to an already entertaining video.

_________________
George Alexander
FS II R503
E-LSA N709FS
http://www.oh2fly.net

Eugene Zimmerman

Joined: 10 Jan 2006
Posts: 392

Posted: Mon Oct 31, 2011 5:49 pm Post subject: Kolb MKIII video

Richard,Plain blue page with  October 25, 2011  at the top is all I get?

No video.   Do I need a particular plugin for my browser?

Gene





On Oct 30, 2011, at 7:59 PM, Richard Pike wrote:

[quote]--> Kolb-List message posted by: "Richard Pike" <richard(at)bcchapel.org (richard(at)bcchapel.org)>



[quote="slyck(at)frontiernet.net"]bad link?

BB

[quote] 



Shouldn't be, but go here:



http://www.bcchapel.org/MESF/3TN0.html



And go to the bottom of the page and click on the appropriate link -



--------

Richard Pike

Kolb MKIII N420P (420ldPoops)

richard (at) bcchapel(dot)org

Kingsport, TN 3TN0

Now faith is the substance of things hoped for, the evidence of things not seen. 

Hebrews 11:1





Read this topic online here:



http://forums.matronics.com/viewtopic.php?p=356363#356363 [quote][b]

Richard Pike

Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee

Posted: Mon Oct 31, 2011 8:40 pm Post subject: Re: Kolb MKIII video

 	  Eugene Zimmerman wrote: 	
		  Richard,Plain blue page with  October 25, 2011  at the top is all I get?

No video.   Do I need a particular plugin for my browser?

Gene

	




I wouldn't think so, it is an .mpeg-4 video, it ought to open in Windows Media Player.  If you are using Firefox, try Internet Explorer, or Safari?



I set up our MESF club website from my church webpage, and we don't have the bandwidth that Youtube or Vimeo does - give it a while to load and see what happens?



If that don't work - I dunno man, I know some things, but I ain't no guru...

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

Eugene Zimmerman

Joined: 10 Jan 2006
Posts: 392

Posted: Wed Nov 02, 2011 4:59 pm Post subject: Kolb MKIII video

Richard,

I'm using Safari version 5.5.1.1

Gene

On Nov 1, 2011, at 12:40 AM, Richard Pike wrote:

 	  Quote: 	

 Eugene Zimmerman wrote:

> Richard,Plain blue page with  October 25, 2011  at the top is all I get?

> No video.   Do I need a particular plugin for my browser?

> Gene

> 

 I wouldn't think so, it is an .mpeg-4 video, it ought to open in Windows Media Player.  If you are using Firefox, try Internet Explorer, or Safari?

 I set up our MESF club website from my church webpage, and we don't have the bandwidth that Youtube or Vimeo does - give it a while to load and see what happens?

 If that don't work - I dunno man, I know some things, but I ain't no guru...

 --------

 Richard Pike

 Kolb MKIII N420P (420ldPoops)

 richard (at) bcchapel(dot)org

 Kingsport, TN 3TN0

 Now faith is the substance of things hoped for, the evidence of things not seen. 

 Hebrews 11:1

 Read this topic online here:

 http://forums.matronics.com/viewtopic.php?p=356472#356472

Richard Pike

Joined: 09 Jan 2006
Posts: 1671
Location: Blountville, Tennessee

Posted: Wed Nov 02, 2011 6:24 pm Post subject: Re: Kolb MKIII video

 	  Eugene Zimmerman wrote: 	
		  Richard,

I'm using Safari version 5.5.1.1

Gene

	




Well - I tried opening it in my older version of Safari - 5.0.5 - and it wouldn't open but asked if I wanted to install an update. I told it yes, and then it opened the video normally. Are you using a Mac?

_________________
Richard Pike
Kolb MKIII N420P (420ldPoops)
Kingsport, TN 3TN0

Forgiving is tough, being forgiven is wonderful, and God's grace really is amazing.

Display posts from previous:

	Matronics Email Lists Forum Index -> Kolb-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum