Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Lord Mounts

Matronics Email Lists Forum Index -> Pulsar-List

View previous topic :: View next topic

Author Message

barrynorman(at)comcast.ne
Guest

Posted: Sat Dec 31, 2011 5:47 am Post subject: Lord Mounts

Happy New Year to the group! Hope all is well and enjoying flying their little plane. I've put 13 hours on mine in the last few weeks. 

  

While doing my annual condition inspection I noticed that after six years of flying that the rubber mounts that go between the engine mount and the truss mount are starting to compress and come apart. I have a Pulsar III and was wondering if anyone knew the part number for these rubber pieces and where I could get them? I looked through Aircraft Spruce and didn't see anything like the ones I have. I ordered a set that looked close but they were too small. 

  

On another note, I was looking at possibly buying a partially completed Pulsar Super Cruiser and joined their group to try and get some info before diving in. Anyone here on this forum have any experience with them? I figured you guys might know something. 

  

Thanks, 

Barry Norman



 [quote][b]

kdpalmer(at)mweb.co.za
Guest

Posted: Sat Dec 31, 2011 6:24 am Post subject: Lord Mounts

Before Pulsar bought them out it  was the KISS get hold of the KISS forum. Bear in mind the owner of Pulsar in El  Salvador was killed a short while ago, are they still operating  ? 

 [quote]   ---

kdpalmer(at)mweb.co.za
Guest

Posted: Sat Dec 31, 2011 6:33 am Post subject: Lord Mounts

And Richard Trickel the  original designer of the Kiss also died a short while ago.

  

 ---

kdpalmer(at)mweb.co.za
Guest

Posted: Sat Dec 31, 2011 6:53 am Post subject: Lord Mounts

The Aero design part # AD307 Shock  Mount

        Sky Star Part #  47005.000 Shock Mount, 22001-13 (Pulsar III)

 [quote]   ---

barrynorman(at)comcast.ne
Guest

Posted: Sat Dec 31, 2011 7:14 am Post subject: Lord Mounts

Thanks for the info. I have those part numbers. I guess if Sky Star is still in business with the kit fox, I could still get them. 

  

I knew the designer of the cruiser and the owner of Pulsar both passed away. I heard the owners wife wants nothing to do with the airplane business so it will probably be sold at some point. 

  

Barry



 

   

From: "Keith Palmer" <kdpalmer(at)mweb.co.za>

To: pulsar-list(at)matronics.com

Sent: Saturday, December 31, 2011 9:52:46 AM

Subject: Re: Lord Mounts



ï»¿  P { 	MARGIN: 0px }   The Aero design part # AD307 Shock Mount

        Sky Star Part # 47005.000 Shock Mount, 22001-13 (Pulsar III)

 [quote] ---

ccoulter(at)wavecable.com
Guest

Posted: Sat Dec 31, 2011 8:56 am Post subject: Lord Mounts

On Sat, 31 Dec 2011 13:46:10 +0000 (UTC)

  barrynorman(at)comcast.net wrote:

 	  Quote: 	
		   

 

 Happy New Year to the group! Hope all is well and 

enjoying flying their little plane. I've put 13 hours on 

mine in the last few weeks. 

 

 Â  

 

 While doing my annual condition inspection I noticed 

that afterÂ six years of flying that the rubber mounts 

that go between the engine mount and the truss mount are 

starting to compress and come apart. I have a Pulsar III 

and was wondering if anyone knew the part number for 

these rubber piecesÂ and where I could get them? I looked 

through Aircraft Spruce and didn't see anything like the 

ones I have. I ordered a set that looked close but they 

were too small. 

 

 Â  

 

 On another note, I was looking at possibly buying a 

partially completed Pulsar Super Cruiser and joined their 

group to try and get some info before diving in. Anyone 

here on this forum have any experience with them? I 

figured you guys might know something. 

 

 Â  

 

 Thanks, 

 

 Barry Norman 


	


Barry



I got them from



Fairchild

3990 A Heritage Oak Coult

Simi Valley, CA 93063-6711

(805) 527-3600



I had to buy 12 as that is thier minimum order.  I think I 

still have some in the hanger, if I havent given them to 

someone else.



They come in 5 different hardnesses , I got one one of the 

harder ones Part Nr 22001-14 Barry Controls.



Another source is Brandson Products Group on the net.



If you are interested and I still have them would you like 

me to send you a set?



Clarke Coulter

barrynorman(at)comcast.ne
Guest

Posted: Sat Dec 31, 2011 1:03 pm Post subject: Lord Mounts

After using a magnifying glass I could finally read the part number on the Lord mounts. They are J3608-1 and Aircraft spruce does have them. 

  

Thanks, 

Barry



 

   

 

From: barrynorman(at)comcast.net

To: "pulsar-list" <pulsar-list(at)matronics.com>

Sent: Saturday, December 31, 2011 8:46:10 AM

Subject: Lord Mounts



 p { margin: 0; }   

Happy New Year to the group! Hope all is well and enjoying flying their little plane. I've put 13 hours on mine in the last few weeks. 

  

While doing my annual condition inspection I noticed that after six years of flying that the rubber mounts that go between the engine mount and the truss mount are starting to compress and come apart. I have a Pulsar III and was wondering if anyone knew the part number for these rubber pieces and where I could get them? I looked through Aircraft Spruce and didn't see anything like the ones I have. I ordered a set that looked close but they were too small. 

  

On another note, I was looking at possibly buying a partially completed Pulsar Super Cruiser and joined their group to try and get some info before diving in. Anyone here on this forum have any experience with them? I figured you guys might know something. 

  

Thanks, 

Barry Norman



[quote]

[b]

ccoulter(at)wavecable.com
Guest

Posted: Sat Dec 31, 2011 1:23 pm Post subject: Lord Mounts

On Sat, 31 Dec 2011 21:02:19 +0000 (UTC)

  barrynorman(at)comcast.net wrote:

[quote] 

 

 After using a magnifying glass I could finally read the 

part number on the Lord mounts. They are J3608-1 and 

Aircraft spruce does have them. 

 

 Â  

 

 Thanks, 

 

 Barry 

 

 

 

 ---

barrynorman(at)comcast.ne
Guest

Posted: Sun Jan 01, 2012 8:04 pm Post subject: Lord Mounts

Hugh, 

  

    Are they the same as the J3608-1 Lord mounts. Did they use the same mounts for the bed mounts? I have a truss mount set up. 

  

Thanks, 

Barry



 

   

From: "HUGH COULTER" <ccoulter(at)wavecable.com>

To: pulsar-list(at)matronics.com

Sent: Saturday, December 31, 2011 4:22:43 PM

Subject: Re: Lord Mounts



--> Pulsar-List message posted by: "HUGH COULTER" <ccoulter(at)wavecable.com>



On Sat, 31 Dec 2011 21:02:19 +0000 (UTC)

  barrynorman(at)comcast.net wrote:

[quote] 

 

 After using a magnifying glass I could finally read the 

part number on the Lord mounts. They are J3608-1 and 

Aircraft spruce does have them. 

 

   

 

 Thanks, 

 

 Barry 

 

 

 

 ---

ccoulter(at)wavecable.com
Guest

Posted: Mon Jan 02, 2012 8:16 am Post subject: Lord Mounts

On Sun, 1 Jan 2012 20:48:26 +0000 (UTC)

  barrynorman(at)comcast.net wrote:

[quote] 

 

 Hugh, 

 

 

 

 Â Â Â  Are they the same as the J3608-1 Lord mounts. Did 

they use the same mounts for the bed mounts? I have a 

truss mount set up. 

 

 

 

 Thanks, 

 

 Barry 

 

 

 

 ---

pilot623(at)gmail.com
Guest

Posted: Mon Jan 02, 2012 9:47 am Post subject: Lord Mounts

Barry,

  

 For what it's worth, I purchased new rubber parts for my  engine mount in 2009 during the fire reconstruction from http://aircraft-specialties.com/ using  part number 530740. I checked on current pricing for someone else a couple  months ago and found they were available at $23.38 each (8 required). They  appeared identical to my original parts supplied by Skystar.

  

 Jim

  



 

Like saving money? Who doesn't! Go  to http://www.ultimatesavingsonline.com  and register to get some great deals! It's free so you have nothing to  lose.  



 [quote]         From: owner-pulsar-list-server(at)matronics.com    [mailto:owner-pulsar-list-server(at)matronics.com] On Behalf Of    barrynorman(at)comcast.net

Sent: Sunday, January 01, 2012 2:48    PM

To: pulsar-list(at)matronics.com

Subject: Re: Pulsar-List:    Lord Mounts

   

      

Hugh,   

    

    Are they the same as the J3608-1 Lord mounts. Did they    use the same mounts for the bed mounts? I have a truss mount set up.   

    

Thanks,   

Barry



   

       

   

From: "HUGH COULTER" <ccoulter(at)wavecable.com>

To:    pulsar-list(at)matronics.com

Sent: Saturday, December 31, 2011    4:22:43 PM

Subject: Re: Lord Mounts



-->    Pulsar-List message posted by: "HUGH COULTER"    <ccoulter(at)wavecable.com>



On Sat, 31 Dec 2011 21:02:19 +0000    (UTC)

  barrynorman(at)comcast.net wrote:

[quote] 

 

    After using a magnifying glass I could finally read the 

part number on    the Lord mounts. They are J3608-1 and 

Aircraft spruce does have them.    

 

   

 

 Thanks, 

 

 Barry    

 

 

 

 ---

barrynorman(at)comcast.ne
Guest

Posted: Mon Jan 02, 2012 12:21 pm Post subject: Lord Mounts

Thanks anyway Hugh. Happy New Year! 

  

Barry



 

   

From: "HUGH COULTER" <ccoulter(at)wavecable.com>

To: pulsar-list(at)matronics.com

Sent: Monday, January 2, 2012 11:15:11 AM

Subject: Re: Lord Mounts



--> Pulsar-List message posted by: "HUGH COULTER" <ccoulter(at)wavecable.com>



On Sun, 1 Jan 2012 20:48:26 +0000 (UTC)

  barrynorman(at)comcast.net wrote:

[quote] 

 

 Hugh, 

 

 

 

     Are they the same as the J3608-1 Lord mounts. Did 

they use the same mounts for the bed mounts? I have a 

truss mount set up. 

 

 

 

 Thanks, 

 

 Barry 

 

 

 

 ---

pv.ds(at)t-online.de
Guest

Posted: Tue Jan 03, 2012 2:51 am Post subject: Lord Mounts

Barry and Group if question is still open,

 

 Looking at the Lockwood catalog (2010-2011) looks like Rotax part number is 860-695, page 56 of catalog under Engine Suspension Frame for rubber mounts. This would only apply to the builders without bed mounts

 

 Regards

 

 Dan

 

 

 

 

 

 

 

 Am 02.01.2012 21:20 Uhr schrieb "barrynorman(at)comcast.net" unter <barrynorman(at)comcast.net>:

 

 [quote]Thanks anyway Hugh. Happy New Year!

 

  

 

 Barry

 

 

 From: "HUGH COULTER" <ccoulter(at)wavecable.com>

 To: pulsar-list(at)matronics.com

 Sent: Monday, January 2, 2012 11:15:11 AM

 Subject: Re: Lord Mounts

 

 --> Pulsar-List message posted by: "HUGH COULTER" <ccoulter(at)wavecable.com>

 

 On Sun, 1 Jan 2012 20:48:26 +0000 (UTC)

   barrynorman(at)comcast.net wrote:

 > 

 > 

 > Hugh, 

 > 

 > 

 > 

 >     Are they the same as the J3608-1 Lord mounts. Did 

 >they use the same mounts for the bed mounts? I have a 

 >truss mount set up. 

 > 

 > 

 > 

 > Thanks, 

 > 

 > Barry 

 > 

 > 

 > 

 > ---

Display posts from previous:

	Matronics Email Lists Forum Index -> Pulsar-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum