Matronics Email Lists :: View topic - Narco AT-165 Transponder wiring questionNarco AT-165 Transpo

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Narco AT-165 Transponder wiring questionNarco AT-165 Transpo

Matronics Email Lists Forum Index -> Avionics-List

View previous topic :: View next topic

Author Message

n262th

Joined: 03 Jan 2012
Posts: 1

Posted: Tue Jan 03, 2012 10:50 pm Post subject: Narco AT-165 Transponder wiring questionNarco AT-165 Transpo

After further investigation, I found out that Narco made several  

models of the AT-165 Transponder as either a new installation (AT-165)  

or as a King KT-76 slide-in replacement (AT-165K) or as a Cessna  

RT-359/459 slide in replacement (AT-165C).  Turns out the unit I have  

is the AT-165C model. It does, for sure, have a 23 pin connector just  

like the old Cessna Transponder.  After finding this out, I was able  

to determine that the 16ga. yellow wire from pin #12 was, indeed, for  

lighting.  Thanks fella's!

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

_________________
Tom

Display posts from previous:

	Matronics Email Lists Forum Index -> Avionics-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum