jonlaury
Joined: 06 Nov 2006 Posts: 336
|
Posted: Sat Jan 14, 2012 8:53 am Post subject: Electrical Gremlins |
|
|
1.) I installed an EyeBeam Mini as a cabin light. It's in a housing that also contains the radio speaker. It gets its power from the battery bus.
Whenever I turn on the PS Engineering 7000B audio panel, or key the mike, the EBM starts flashing and is unresponsive to its on/off switch or built-in dimmer. The only way to get it to stop is to pull the power.
The dimming/switching are by capacitance sensing (touch). Everything in the airplane is connected to a single point ground.
Suggestions much appreciated
2.) I installed an AEC 9005 LVW module per instructions but the LVW lamp flashes (blinking LED) when I power the system from my bench 13.6v power supply.
3.) Same as 2 above for my B&C LR3 regulator. I did all of their troubleshooting diagnostics and everything was to spec.
Thanks for any help,
John
| - The Matronics AeroElectric-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?AeroElectric-List |
|
|
|