teamgrumman(at)yahoo.com Guest
|
Posted: Sun Jan 22, 2012 2:33 pm Post subject: LoPresti Nose Bowl, Cheetah |
|
|
I've installed 2 Power Flows on Cheetahs. It takes a while to get the airbox properly aligned, drilled and nutplated. When I got this Cheetah a year ago, there were only two screws holding the airbox down. I thought it had to have been someone in a hurry and not taking the time to align and install the airbox correctly. So, last year, I spent a couple of hours, removing the nutplates and realigning airbox. Better. But I still couldn't get the forward two screws in.
So, this year, after reading the notes from last year, I thought I'd take another look at it. It can't be done.
The inlet on the LoPresti nose bowl is off-center by 3/8 inch. I checked the rest of the installation and I can't see where the nose bowl could be rotated in place enough to correct the misalignment.
| - The Matronics TeamGrumman-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
Description: |
|
Filesize: |
1.16 MB |
Viewed: |
563 Time(s) |
|
|
|