 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
teamgrumman(at)yahoo.com
Guest
|
 Posted: Sat Feb 18, 2012 5:52 pm Post subject: Cabin heat nylon bushings |
 |
|
OK, what is the trick to getting the bushings installed? I tried fabricating several different tools. I got one of the bushings to work. The other 3 didn't.
Is there a better solution for these bushings?
[quote][b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
 |
n76lima(at)mindspring.com
Guest
|
| Posted: Sat Feb 18, 2012 6:10 pm Post subject: Cabin heat nylon bushings |
|
|
I use large rivet dimple dies (-5) to expand the non-flanged end of the.bushings. Worked good for a decade or more.
--Bob Steward
Sent from Samsung mobile
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
Discover
Joined: 26 Feb 2007
Posts: 429
|
| Posted: Sat Feb 18, 2012 6:16 pm Post subject: Cabin heat nylon bushings |
|
|
It's been about 6 years ago but as I recall Garner has a tool that he loans out when you get the bushings and seal material from him. The tool must have worked pretty good because I don't remember it being a difficult repair
Ned
<><
On Feb 18, 2012, at 7:52 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:
[quote]OK, what is the trick to getting the bushings installed? I tried fabricating several different tools. I got one of the bushings to work. The other 3 didn't.
Is there a better solution for these bushings?
[b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
teamgrumman(at)yahoo.com
Guest
|
|
| Back to top |
|
|
teamgrumman(at)yahoo.com
Guest
|
| Posted: Sat Feb 18, 2012 7:05 pm Post subject: Cabin heat nylon bushings |
|
|
Garner doesn't have one any more.
From: 923TE <923te(at)att.net>
To: "teamgrumman-list(at)matronics.com" <teamgrumman-list(at)matronics.com>
Sent: Saturday, February 18, 2012 6:15 PM
Subject: Re: Cabin heat nylon bushings
It's been about 6 years ago but as I recall Garner has a tool that he loans out when you get the bushings and seal material from him. The tool must have worked pretty good because I don't remember it being a difficult repair
Ned
<><
On Feb 18, 2012, at 7:52 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:
[quote]OK, what is the trick to getting the bushings installed? I tried fabricating several different tools. I got one of the bushings to work. The other 3 didn't.
Is there a better solution for these bushings?
[/b][b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
grumpyparts
Joined: 28 Jan 2009
Posts: 65
Location: EGHH
|
|
| Back to top |
|
|
teamgrumman(at)yahoo.com
Guest
|
|
| Back to top |
|
|
garnerrice(at)hotmail.com
Guest
|
| Posted: Mon Feb 20, 2012 7:32 am Post subject: Cabin heat nylon bushings |
|
|
The company that I bought them from back in 2001 was Hartwell Commercial Products. The tools came from Placentia Ca, but the main office is in Chicago. The last phone number I have is 714-993-2752. The tool for the nas1368n4c is a HT-4 flipping tool. HT-6 for the nas1368n6c. I have bought 20 of them and loaned them out for those that were in need. Needless to say, the loaners did not come back. As I get older, I cant remember who I loaned them to, but I'm sure those that I loaned them to, are older than I am. So the real question is for my older customers is, did you remember to tighten up the prop bolts before you put that shiney pointed thingy on the front.
Garner
tic-toc
Date: Sat, 18 Feb 2012 19:04:16 -0800
From: teamgrumman(at)yahoo.com
Subject: Re: Cabin heat nylon bushings
To: teamgrumman-list(at)matronics.com
Garner doesn't have one any more.
From: 923TE <923te(at)att.net>
To: "teamgrumman-list(at)matronics.com" <teamgrumman-list(at)matronics.com>
Sent: Saturday, February 18, 2012 6:15 PM
Subject: Re: TeamGrumman-List: Cabin heat nylon bushings
It's been about 6 years ago but as I recall Garner has a tool that he loans out when you get the bushings and seal material from him. The tool must have worked pretty good because I don't remember it being a difficult repair
Ned
<><
On Feb 18, 2012, at 7:52 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:
[quote]OK, what is the trick to getting the bushings installed? I tried fabricating several different tools. I got one of the bushings to work. The other 3 didn't.
Is there a better solution for these bushings?
List" target="_blank">http://www.matronics.com/Navigator?TeamGrumman-List
http://forums.matronics.com
="_blank">http://www.matronics.com/contribution
[b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
slacktide
Joined: 26 Jun 2010
Posts: 14
|
| Posted: Mon Feb 20, 2012 6:16 pm Post subject: Cabin heat nylon bushings |
|
|
Hartwell is still around. Don't know if they still have anything to do with this product, they mostly manufacture latches of various kinds... They are a supplier for a project I've been working for several years now... I've been dealing with them (on the engineering side) in regards to this fantastic product: http://www.hartwellcorp.com/pdfs/SGcsB787bif.pdf
Contact info is here: http://www.hartwellcorp.com/html/contact.html
You may have better luck with the phone number listed as "HASCO", that's their spares/aftermarket services division.
DWB
On Mon, Feb 20, 2012 at 7:32 AM, Garner Rice <garnerrice(at)hotmail.com (garnerrice(at)hotmail.com)> wrote:
[quote] The company that I bought them from back in 2001 was Hartwell Commercial Products. The tools came from Placentia Ca, but the main office is in Chicago. The last phone number I have is [url=tel:714-993-2752]714-993-2752[/url]. The tool for the nas1368n4c is a HT-4 flipping tool. HT-6 for the nas1368n6c. I have bought 20 of them and loaned them out for those that were in need. Needless to say, the loaners did not come back. As I get older, I cant remember who I loaned them to, but I'm sure those that I loaned them to, are older than I am. So the real question is for my older customers is, did you remember to tighten up the prop bolts before you put that shiney pointed thingy on the front.
Garner
tic-toc
Date: Sat, 18 Feb 2012 19:04:16 -0800
From: teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)
Subject: Re: Cabin heat nylon bushings
To: teamgrumman-list(at)matronics.com (teamgrumman-list(at)matronics.com)
Garner doesn't have one any more.
From: 923TE <923te(at)att.net (923te(at)att.net)>
To: "teamgrumman-list(at)matronics.com (teamgrumman-list(at)matronics.com)" <teamgrumman-list(at)matronics.com (teamgrumman-list(at)matronics.com)>
Sent: Saturday, February 18, 2012 6:15 PM
Subject: Re: Cabin heat nylon bushings
It's been about 6 years ago but as I recall Garner has a tool that he loans out when you get the bushings and seal material from him. The tool must have worked pretty good because I don't remember it being a difficult repair
Ned
<><
On Feb 18, 2012, at 7:52 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:
| Quote: |
st" target="_blank">http://www.matronics.com/Navigator?TeamGrumman-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
slacktide
Joined: 26 Jun 2010
Posts: 14
|
| Posted: Mon Feb 20, 2012 6:45 pm Post subject: Cabin heat nylon bushings |
|
|
On second look, it appears that they spun that part of the product line off as Hartwell-Dzus... which then became Southco-Dzus, which then renamed itself Southco. It appears that they still make a grommet similar to the NAS1368, and they mention an installation tool on their catalog page.
http://www.southco.com/product/class.aspx?cid=7538
DWB
On Mon, Feb 20, 2012 at 6:15 PM, Dan Baisley <slacktide(at)gmail.com (slacktide(at)gmail.com)> wrote:
[quote]Hartwell is still around. Don't know if they still have anything to do with this product, they mostly manufacture latches of various kinds... They are a supplier for a project I've been working for several years now... I've been dealing with them (on the engineering side) in regards to this fantastic product: http://www.hartwellcorp.com/pdfs/SGcsB787bif.pdf
Contact info is here: http://www.hartwellcorp.com/html/contact.html
You may have better luck with the phone number listed as "HASCO", that's their spares/aftermarket services division.
DWB
On Mon, Feb 20, 2012 at 7:32 AM, Garner Rice <garnerrice(at)hotmail.com (garnerrice(at)hotmail.com)> wrote:
| Quote: | The company that I bought them from back in 2001 was Hartwell Commercial Products. The tools came from Placentia Ca, but the main office is in Chicago. The last phone number I have is [url=tel:714-993-2752]714-993-2752[/url]. The tool for the nas1368n4c is a HT-4 flipping tool. HT-6 for the nas1368n6c. I have bought 20 of them and loaned them out for those that were in need. Needless to say, the loaners did not come back. As I get older, I cant remember who I loaned them to, but I'm sure those that I loaned them to, are older than I am. So the real question is for my older customers is, did you remember to tighten up the prop bolts before you put that shiney pointed thingy on the front.
Garner
tic-toc
Date: Sat, 18 Feb 2012 19:04:16 -0800
From: teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)
Subject: Re: Cabin heat nylon bushings
To: teamgrumman-list(at)matronics.com (teamgrumman-list(at)matronics.com)
Garner doesn't have one any more.
From: 923TE <923te(at)att.net (923te(at)att.net)>
To: "teamgrumman-list(at)matronics.com (teamgrumman-list(at)matronics.com)" <teamgrumman-list(at)matronics.com (teamgrumman-list(at)matronics.com)>
Sent: Saturday, February 18, 2012 6:15 PM
Subject: Re: Cabin heat nylon bushings
It's been about 6 years ago but as I recall Garner has a tool that he loans out when you get the bushings and seal material from him. The tool must have worked pretty good because I don't remember it being a difficult repair
Ned
<><
On Feb 18, 2012, at 7:52 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:
| Quote: |
st" target="_blank">http://www.matronics.com/Navigator?TeamGrumman-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
|
[b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
teamgrumman(at)yahoo.com
Guest
|
| Posted: Tue Feb 21, 2012 12:05 pm Post subject: Cabin heat nylon bushings |
|
|
That number is no longer in service.
From: Garner Rice <garnerrice(at)hotmail.com>
To: teamgrumman-list(at)matronics.com
Sent: Monday, February 20, 2012 7:32 AM
Subject: RE: Cabin heat nylon bushings
The company that I bought them from back in 2001 was Hartwell Commercial Products. The tools came from Placentia Ca, but the main office is in Chicago. The last phone number I have is 714-993-2752. The tool for the nas1368n4c is a HT-4 flipping tool. HT-6 for the nas1368n6c. I have bought 20 of them and loaned them out for those that were in need. Needless to say, the loaners did not come back. As I get older, I cant remember who I loaned them to, but I'm sure those that I loaned them to, are older than I am. So the real question is for my older customers is, did you remember to tighten up the prop bolts before you put that shiney pointed thingy on the front.
Garner
tic-toc
Date: Sat, 18 Feb 2012 19:04:16 -0800
From: teamgrumman(at)yahoo.com
Subject: Re: Cabin heat nylon bushings
To: teamgrumman-list(at)matronics.com
Garner doesn't have one any more.
From: 923TE <923te(at)att.net>
To: "teamgrumman-list(at)matronics.com" <teamgrumman-list(at)matronics.com>
Sent: Saturday, February 18, 2012 6:15 PM
Subject: Re: TeamGrumman-List: Cabin heat nylon bushings
It's been about 6 years ago but as I recall Garner has a tool that he loans out when you get the bushings and seal material from him. The tool must have worked pretty good because I don't remember it being a difficult repair
Ned
<><
On Feb 18, 2012, at 7:52 PM, Gary Vogt <teamgrumman(at)yahoo.com (teamgrumman(at)yahoo.com)> wrote:
[quote]OK, what is the trick to getting the bushings installed? I tried fabricating several different tools. I got one of the bushings to work. The other 3 didn't.
Is there a better solution for these bushings?
List" target="_blank">http://www.matronics.com/Navigator?TeamGrumman-List
http://forums.matronics.com
="_blank">http://www.matronics.com/contribution
" href="http://www.matronics.com/Navigator?TeamGrumman-List">http://www.mrel="nofollow" target="_blank" href="http://forums.matronics.com">htt========================
========
[b]
| | - The Matronics TeamGrumman-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?TeamGrumman-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
