Matronics Email Lists :: View topic - LED WigWag with B&C SSF-1

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

LED WigWag with B&C SSF-1

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

ashuramj(at)hotmail.com
Guest

Posted: Fri Mar 30, 2012 3:19 pm Post subject: LED WigWag with B&C SSF-1

Bob, can I wire two LED landing and taxi lights per Page 3.0 (Ref DE 12/15/11) but using a single switch (already installed and labeled in unflown RV-6) as shown on Page 3.0 from 2003?  Thank you

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Sat Mar 31, 2012 5:34 pm Post subject: LED WigWag with B&C SSF-1

At 06:19 PM 3/30/2012, you wrote:

 	  Quote: 	
		  



Bob, can I wire two LED landing and taxi lights per Page 3.0 (Ref DE 

12/15/11) but using a single switch (already installed and labeled 

in unflown RV-6) as shown on Page 3.0 from 2003?  Thank you


	


   Give me a few days on this. It occurs to me that

   I've been twisting what WAS a good system for

   incandescent lamps into a pretzel in search

   of the elegant solution for LED lamps.



   I'm going to do a clean-piece-of-paper study

   of some alternatives to the automotive flasher.

   Given the very low current draw and insignificant

   inrush for the LED lamps, some sort of all solid

   state approach is called for. I think some others

   here on the List have mentioned their own

   adventures in this arena. Perhaps they'll share.



   In any case, there's a cleaner way to go about it

   and so the answer is "Yes, we can use the single

   switch configuration you've already installed."

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

fvalarm(at)rapidnet.net
Guest

Posted: Sat Mar 31, 2012 7:52 pm Post subject: LED WigWag with B&C SSF-1

I used a ETHFSS-SP with my HID landing lights as other on VAF have

suggested.  I can have them both on or flashing mode.  Should work with

LED's I would think see...



http://www.bestwarninglights.com/m7/ETHFSS-SP--sound-off-signal-select-a-pat

tern-headlight-flasher-positive-switching.html



$48 so not cheap but solid state and good for up to 55W per side.



Bevan



--

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

gregmchugh

Joined: 03 Apr 2012
Posts: 42

Posted: Wed Apr 04, 2012 8:01 am Post subject: Re: LED WigWag with B&C SSF-1

I have been considering the Perihelion Wig-Wag to use with Teledyne LED Landing/Taxi lights. I will be interested in other options for the Wig-Wag module...



Wig-Wag



http://www.periheliondesign.com/wigwagmnl.htm



LED Lights



http://www.aircraftspruce.com/catalog/elpages/teledynelandinglight.php



Greg McHugh

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Wed Apr 04, 2012 8:41 am Post subject: LED WigWag with B&C SSF-1

At 11:01 AM 4/4/2012, you wrote:

 	  Quote: 	
		  



I have been considering the Perihelion Wig-Wag to use with Teledyne 

LED Landing/Taxi lights. I will be interested in other options for 

the Wig-Wag module...


	


   That one works and is, no doubt, suited to LED

   lighting fixtures

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum