 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
CrownLJ(at)verizon.net
Guest
|
 Posted: Wed May 24, 2006 9:25 am Post subject: Rotax carb sockets |
 |
|
In order not to have the appearance of an endorsement or solicitation; =
I'm trying to ask a question without naming the company. There is a =
non-Rotax source for the rubber carb sockets. The price is the same, =
but the company claims a 10 yr life due to rubber composition. Has =
anyone had experience with this socket? =20
Thanks,
Larry
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
 |
runwayrex(at)juno.com
Guest
|
| Posted: Wed May 24, 2006 12:02 pm Post subject: Rotax carb sockets |
|
|
Go one better Larry,
I buy Sea Doo snowmobile carb sockets for about 1/10th the Rotax cost.=
I was sent in that direction by a Rotax employee. They work great!
Rex Phelps / Michigan / model 3
-- "Larry Martin" <CrownLJ(at)verizon.net> wrote:
In order not to have the appearance of an endorsement or solicitation; =3D=
I'm trying to ask a question without naming the company. There is a =3D=
non-Rotax source for the rubber carb sockets. The price is the same, =3D=
but the company claims a 10 yr life due to rubber composition. Has =3D
anyone had experience with this socket? =3D20
Thanks,
Larry
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=
=
=
<html><P>Go one better Larry,</P>
<P> I buy Sea Doo snowmobile carb sockets for about 1/10th the Rot=
ax cost. I was sent in that direction by a Rotax employee. They work gre=
at!</P>
<P>Rex Phelps / Michigan / model 3</P>
<P><BR><BR>-- "Larry Martin" <CrownLJ(at)verizon.net>&=
nbsp;wrote:<BR>--> Kitfox-List message posted by:=
"Larry Martin" <CrownLJ(at)verizon.net><BR><BR>In&nbs=
p;order not to have the appearance of =
;an endorsement or solicitation; =3D<BR>I'm try=
ing to ask a question without naming =
the company. There is a =3D<BR>non-Rotax&=
nbsp;source for the rubber carb sockets. &=
nbsp;The price is the same, =3D<BR>but the=
company claims a 10 yr life due =
;to rubber composition. Has =3D<BR>anyone =
;had experience with this socket? =3D20<BR><BR>=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR=
p;the Matronics List Features Navigator to =
;Search & Download, 7-Day Browse, Chat,&nbs=
sp; &nb=
sp; &nb=
sp; <BR=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- NEW&n=
sp;the All New Matronics Email List Wiki!<=
p; &nbs=
p; &nbs=
p; <BR>=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - List Contribution Web&=
nbsp; &=
nbsp; &=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D<BR><BR><BR><BR> <BR> <BR> <BR><BR><BR><BR></P></ht=
ml>
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
Lyle Persels
Joined: 10 Jan 2006
Posts: 34
Location: Osceola, IA
|
| Posted: Wed May 24, 2006 2:08 pm Post subject: Rotax carb sockets |
|
|
Rex,
Do you have a web site you can point us to for these parts?
Lyle P.
On 05 24, 06, at 7:59 PM, Rexster wrote:
| Quote: |
Go one better Larry,
I buy Sea Doo snowmobile carb sockets for about 1/10th the Rotax
cost.=
I was sent in that direction by a Rotax employee. They work great!
Rex Phelps / Michigan / model 3
-- "Larry Martin" <CrownLJ(at)verizon.net> wrote:
<CrownLJ(at)verizon.net>
In order not to have the appearance of an endorsement or
solicitation; =3D=
I'm trying to ask a question without naming the company. There is
a =3D=
non-Rotax source for the rubber carb sockets. The price is the
same, =3D=
but the company claims a 10 yr life due to rubber composition. Has
=3D
anyone had experience with this socket? =3D20
Thanks,
Larry
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=
=
=
<html><P>Go one better Larry,</P>
<P> I buy Sea Doo snowmobile carb sockets for about 1/10th
the Rot=
ax cost. I was sent in that direction by a Rotax employee. They
work gre=
at!</P>
<P>Rex Phelps / Michigan / model 3</P>
<P><BR><BR>--
"Larry Martin" <CrownLJ(at)verizon.net>&=
nbsp;wrote:<BR>--> Kitfox-
List message posted by:=
"Larry Martin" <CrownLJ(at)verizon.net><BR><BR>In&n
bs=
p;order not to have the appearance of&nb
sp=
;an endorsement or solicitation; =3D<BR>I'm t
ry=
ing to ask a question without naming&nbs
p;=
the company. There is a =3D<BR>non-
Rotax&=
nbsp;source for the rubber carb sockets. 
;&=
nbsp;The price is the same, =3D<BR>but t
he=
company claims a
10 yr life due =
;to rubber composition. Has =3D<BR>anyone&nb
sp=
;had experience with this socket?
=3D20<BR><BR>=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<
BR=
p;the Matronics List Features Navigator to&nb
sp=
;Search & Download, 7-
Day Browse, Chat,&nbs=
sp; &
nb=
sp; &
nb=
sp; <
BR=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
-
NEW&n=
sp;the All New Matronics Email List Wiki
!<=
p; &n
bs=
p; &n
bs=
p; <B
R>=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
sp; -
List Contribution Web&=
nbsp;  
;&=
nbsp;  
;&=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
3D=
=3D=3D<BR><BR><BR><BR> <BR> <BR> <BR><BR><BR><BR></
P></ht=
ml>
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
runwayrex(at)juno.com
Guest
|
| Posted: Wed May 24, 2006 2:35 pm Post subject: Rotax carb sockets |
|
|
No I don't have a website for that. I took my torn boot to my local snow=
mobile dealer who sells Sea Doo (Rotax engined). I showed him my expensi=
ve boots and he came out with a box of almost identical ones. I don't re=
member the exact price, but they were someplace in the $5 - 6 range.I bo=
ught about ten of them and split my haul with my buddy. Neither of us ha=
s replaced since. One way to prolong the life of these is to attach mult=
iple springs (I use four) to the carb, coming from the manifold. Follow =
the other directions about the clamp spacing too. I haven't changed one =
in about 200 hours now.
Rex Phelps / Michigan / Model 3
-- Lyle Persels <lpers(at)mchsi.com> wrote:
Rex,
Do you have a web site you can point us to for these parts?
Lyle P.
On 05 24, 06, at 7:59 PM, Rexster wrote:
| Quote: |
Go one better Larry,
I buy Sea Doo snowmobile carb sockets for about 1/10th the Rotax =
|
| Quote: | cost.=3D
I was sent in that direction by a Rotax employee. They work great!
Rex Phelps / Michigan / model 3
-- "Larry Martin" <CrownLJ(at)verizon.net> wrote:
|
| Quote: | <CrownLJ(at)verizon.net>
In order not to have the appearance of an endorsement or =
|
| Quote: | solicitation; =3D3D=3D
I'm trying to ask a question without naming the company. There is =
|
| Quote: | a =3D3D=3D
non-Rotax source for the rubber carb sockets. The price is the =
|
| Quote: | same, =3D3D=3D
but the company claims a 10 yr life due to rubber composition. Has =
|
| Quote: | =3D3D
anyone had experience with this socket? =3D3D20
Thanks,
Larry
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D
=3D
=3D
=3D
<html><P>Go one better Larry,</P>
<P> I buy Sea Doo snowmobile carb sockets for about 1/10th =
|
| Quote: | the Rot=3D
ax cost. I was sent in that direction by a Rotax employee. They =
|
| Quote: | work gre=3D
at!</P>
<P>Rex Phelps / Michigan / model 3</P>
<P><BR><BR>-- =
|
| Quote: | "Larry Martin" <CrownLJ(at)verizon.net>&=3D
nbsp;wrote:<BR>--> Kitfox- =
|
| Quote: | List message posted by:=3D
"Larry Martin" <CrownLJ(at)verizon.net><BR><BR>In&n=
=
|
| Quote: | bs=3D
p;order not to have the appearance of&nb=
=
|
| Quote: | sp=3D
;an endorsement or solicitation; =3D3D<BR>I'm =
;t =
|
| Quote: | ry=3D
ing to ask a question without naming&nbs=
=
|
| Quote: | p;=3D
the company. There is a =3D3D<BR>non- =
|
| Quote: | Rotax&=3D
nbsp;source for the rubber carb sockets. =
=
|
| Quote: | ;&=3D
nbsp;The price is the same, =3D3D<BR>but =
;t =
|
| Quote: | he=3D
company claims a =
|
| Quote: | 10 yr life due =3D
;to rubber composition. Has =3D3D<BR>anyone&=
nb =
|
| Quote: | sp=3D
;had experience with this socket? =
|
| Quote: | =3D3D20<BR><BR>=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D< =
|
| Quote: | BR=3D
p;the Matronics List Features Navigator to&nb=
=
|
| Quote: | sp=3D
;Search & Download, 7- =
|
| Quote: | Day Browse, Chat,&nbs=3D
sp; &=
=
|
| Quote: | nb=3D
sp; &=
=
|
| Quote: | nb=3D
sp; <=
=
|
| Quote: | BR=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
- =
|
| Quote: | NEW&n=3D
sp;the All New Matronics Email List Wiki=
=
|
| Quote: | !<=3D
p; &n=
=
|
| Quote: | bs=3D
p; &n=
=
|
| Quote: | bs=3D
p; <B=
=
|
| Quote: | R>=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
sp; - =
|
| Quote: | List Contribution Web&=3D
nbsp;  =
=
|
| Quote: | ;&=3D
nbsp;  =
=
|
| Quote: | ;&=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D =
|
| Quote: | 3D=3D
=3D3D=3D3D<BR><BR><BR><BR> <BR> <BR> <BR><BR><BR><BR></=
=
|
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=
=
=
<html><P>No I don't have a website for that. I took my torn boot to my l=
ocal snowmobile dealer who sells Sea Doo (Rotax engined). I showed him m=
y expensive boots and he came out with a box of almost identical ones. I=
don't remember the exact price, but they were someplace in the $5 - 6 r=
ange.I bought about ten of them and split my haul with my buddy. Neither=
of us has replaced since. One way to prolong the life of these is to at=
tach multiple springs (I use four) to the carb, coming from the manifold=
. Follow the other directions about the clamp spacing too. I haven't cha=
nged one in about 200 hours now.</P>
<P>Rex Phelps / Michigan / Model 3<BR><BR>-- Lyle Persels =
;<lpers(at)mchsi.com> wrote:<BR>--> Kitfox-List mes=
sage posted by: Lyle Persels <lpers(at)mchsi.co=
m><BR><BR>Rex,<BR><BR>Do you have a web site=
you can point us to for these p=
arts?<BR><BR>Lyle P.<BR><BR>On 05 24, 06, at&nb=
sp;7:59 PM, Rexster wrote:<BR><BR>> --> K=
itfox-List message posted by: "Rexster" <run=
wayrex(at)juno.com><BR>><BR>> Go one better La=
rry,<BR>> I buy Sea Doo snowmobi=
le carb sockets for about 1/10th the =
Rotax <BR>> cost.=3D<BR>> I was&nb=
sp;sent in that direction by a Rotax =
employee. They work great!<BR>> Rex Phelps&n=
bsp;/ Michigan / model 3<BR>><BR>><BR>>&nbs=
p;-- "Larry Martin" <CrownLJ(at)verizon.net> wrot=
e:<BR>> --> Kitfox-List message posted by=
: "Larry Martin" <BR>> <CrownLJ(at)verizon.=
net><BR>><BR>> In order not to have&nb=
sp;the appearance of an endorsement or &nb=
sp;<BR>> solicitation; =3D3D=3D<BR>><BR>> I'm&nb=
sp;trying to ask a question without naming=
the company. There is <BR>>&nbs=
p;a =3D3D=3D<BR>><BR>> non-Rotax source for&nb=
sp;the rubber carb sockets. The price&nbs=
p;is the <BR>> same, =3D3D=3D<BR>><BR>&g=
t; but the company claims a 10 yr&nbs=
p;life due to rubber composition. Has&nbs=
p; <BR>> =3D3D<BR>> anyone had experience=
with this socket? =3D3D20<BR>><BR>> Than=
ks,<BR>> Larry<BR>><BR>><BR>><BR>> =3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D <BR>> 3D=3D<BR>> =
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D<BR>><BR>=
> =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D <BR>>&nb=
sp;3D=3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D<BR>><BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D <BR>> 3D=3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D <BR>> 3D=3D<BR>> =3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D<BR>><BR>><BR>><BR=
| Quote: | > =3D<BR>><BR>> =3D<BR>><BR>> =
; =3D<BR>><BR>><BR>><BR>><BR>><BR>><BR>> =
|
<html><P>Go one better Larry,</P><BR>&g=
t; <P>&nbsp; I buy Sea Doo snowm=
obile carb sockets for about 1/10th =
<BR>> the Rot=3D<BR>> ax cost. I was=
sent in that direction by a Rotax&nb=
sp;employee. They <BR>> work gre=3D<BR>>=
at!</P><BR>> <P>Rex Phelps / Mi=
chigan / model 3</P><BR>> <P><BR&g=
t;<BR>-- <BR>> &nbsp;"Larry&nbsp;Martin"&=
nbsp;&lt;CrownLJ(at)verizon.net&gt;&=3D<BR>> nbsp;wrote=
:<BR>--&gt;&nbsp;Kitfox- <BR>> List&nbsp;=
message&nbsp;posted&nbsp;by:=3D<BR>> &nbsp;"Larry&am=
p;nbsp;Martin"&nbsp;&lt;CrownLJ(at)verizon.net&gt;<BR><=
;BR>In&n <BR>> bs=3D<BR>> p;order&nbsp;n=
ot&nbsp;to&nbsp;have&nbsp;the&nbsp;appearance&nbsp;o=
f&nb <BR>> sp=3D<BR>> ;an&nbsp;endorsement&=
amp;nbsp;or&nbsp;solicitation;&nbsp;=3D3D<BR>I'm&nbsp;=
t <BR>> ry=3D<BR>> ing&nbsp;to&nbsp;ask&=
;nbsp;a&nbsp;question&nbsp;without&nbsp;naming&nbs =
<BR>> p;=3D<BR>> the&nbsp;company.&nbsp;&nbs=
p;There&nbsp;is&nbsp;a&nbsp;=3D3D<BR>non- <BR>>=
; Rotax&=3D<BR>> nbsp;source&nbsp;for&nbsp;the&=
amp;nbsp;rubber&nbsp;carb&nbsp;sockets.&nbsp <BR>>&n=
bsp;;&=3D<BR>> nbsp;The&nbsp;price&nbsp;is&nbsp;=
the&nbsp;same,&nbsp;=3D3D<BR>but&nbsp;t <BR>>&=
nbsp;he=3D<BR>> &nbsp;company&nbsp;claims&nbsp;a&=
;nbsp; <BR>> 10&nbsp;yr&nbsp;life&nbsp;due&=
nbsp=3D<BR>> ;to&nbsp;rubber&nbsp;composition.&nbsp;=
&nbsp;Has&nbsp;=3D3D<BR>anyone&nb <BR>> s=
p=3D<BR>> ;had&nbsp;experience&nbsp;with&nbsp;this&a=
mp;nbsp;socket? <BR>> &nbsp;=3D3D20<BR><BR>=
=3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D <BR=
| Quote: | > 3D=3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
|
< <BR>> BR=3D<BR>> p;the&nbsp;Matronics&=
nbsp;List&nbsp;Features&nbsp;Navigator&nbsp;to&nb <=
BR>> sp=3D<BR>> ;Search&nbsp;&amp;&nbsp;Down=
load,&nbsp;7- <BR>> Day&nbsp;Browse,&nbsp;Chat,=
&nbs=3D<BR>> sp;&nbsp;&nbsp;&nbsp;&nbsp;&=
;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&&=
nbsp;<BR>> nb=3D<BR>> sp;&nbsp;&nbsp;&nbsp;&=
amp;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&am=
p;nbsp;& <BR>> nb=3D<BR>> sp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=
&nbsp;&nbsp;< <BR>> BR=3D<BR>> =3D3D=3D3=
D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D <BR>> 3D=3D<BR>>&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=
&nbsp;&nbsp;&nbsp;- <BR>> &nbsp;NEW&n=3D=
<BR>> sp;the&nbsp;All&nbsp;New&nbsp;Matronics&nb=
sp;Email&nbsp;List&nbsp;Wiki <BR>> !<=3D<BR>>=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n <BR>> =
bs=3D<BR>> p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&=
amp;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n <=
BR>> bs=3D<BR>> p;&nbsp;&nbsp;&nbsp;&nbs=
p;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;=
<B <BR>> R>=3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D <BR>> 3D=3D<BR>> =3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D <BR>> 3D=3D<BR>> =
sp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;- <BR>>&nbs=
p;&nbsp;List&nbsp;Contribution&nbsp;Web&=3D<BR>> =
;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&n=
bsp;&nbsp;&nbsp;&nbsp;&nbsp <BR>> ;&=3D=
<BR>> nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&am=
p;nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp <BR>>&n=
bsp;;&=3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
<BR>> 3D=3D<BR>> =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D=
3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=
=3D3D=3D3D=3D <BR>> 3D=3D<BR>> =3D3D=3D3D<BR>=
<BR><BR><BR>&nbsp;<BR>&nbsp;<BR>&a=
mp;nbsp;<BR><BR><BR><BR></ <BR>> =
;P></ht=3D<BR>> ml><BR>><BR>><BR>><BR>><BR>=
><BR>><BR>><BR>><BR>><BR>><BR>><BR>><BR>><BR>=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - The Kitfo=
the many List utilities such as the&=
nbsp; &=
nbsp; &=
nbsp; &=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - NEW MATRONICS&n=
nbsp; &=
nbsp; &=
nbsp; &=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- List Contribution Web Site =
p; &nbs=
p; -Matt =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR><BR><=
BR><BR> <BR> <BR> <BR><BR><BR><BR></P></html>
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
CrownLJ(at)verizon.net
Guest
|
| Posted: Wed May 24, 2006 2:36 pm Post subject: Rotax carb sockets |
|
|
Great, what yr/model of Ski Doo?
Larry
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
Mnflyer
Joined: 15 May 2006
Posts: 78
|
| Posted: Wed May 24, 2006 4:08 pm Post subject: Re: Rotax carb sockets |
|
|
I have and am using the JBM brand carb sockets on my 503 and have a pair for the 582, also have a pair a spares for the HKS on my Kitfox, the HKS/912 are considerably less than the Rotax/Bing sockets.
Iam very satisfied.
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
GB
MNFlyer
Flying a HKS Kitfox III |
|
| Back to top |
|
|
akfotoman
Joined: 19 Apr 2006
Posts: 120
Location: Anchorage, Alaska
|
| Posted: Wed May 24, 2006 5:34 pm Post subject: Rotax carb sockets |
|
|
Where are you getting those sockets? I just spent $52 for two of the sockets
for a R-582 with CPS. Rotax recommends replacing them every year for
aircraft engines, and I live in the cold country (ALASKA) and its hell on
them. So where...?
Rob Stapleton
--
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Have cameras, will travel! |
|
| Back to top |
|
|
runwayrex(at)juno.com
Guest
|
| Posted: Wed May 24, 2006 6:18 pm Post subject: Rotax carb sockets |
|
|
I don't know what sockets the 582 uses. I have the 912 UL. I will check =
part numbers of these this weekend when I get to the hangar.
Rex
=
-- "Rob Stapleton" <foto(at)alaska.net> wrote:
Where are you getting those sockets? I just spent $52 for two of the soc=
kets
for a R-582 with CPS. Rotax recommends replacing them every year for
aircraft engines, and I live in the cold country (ALASKA) and its hell o=
n
them. So where...?
Rob Stapleton
--
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
Mnflyer
Joined: 15 May 2006
Posts: 78
|
| Posted: Wed May 24, 2006 6:18 pm Post subject: Re: Rotax carb sockets |
|
|
Hi Rob, he generally has an Ad on Barnstormers, sometimes has them on e-bay, I don't have his phone number here at the house , if you can't find an ad on Barnstormers let me know and I'll post the phone #. He has an ad on Barnstormers, I just checked, I used the search page typed in rotax carb sockets and the ad's came right up.
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
GB
MNFlyer
Flying a HKS Kitfox III
Last edited by Mnflyer on Wed May 24, 2006 6:22 pm; edited 1 time in total |
|
| Back to top |
|
|
rexjan(at)bigpond.com
Guest
|
| Posted: Thu May 25, 2006 4:22 pm Post subject: Rotax carb sockets |
|
|
Hi ! Larry,
I bought a couple of these about 12 months ago for =
when I needed them. I used to race Karts with these on and know how =
notorious they are for failing. Anyway I just fitted them and they hold =
the carbies a lot steadier and certainly look to be of far superior =
material. I am impressed but it is early days yet.
=
Rex.
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
CrownLJ(at)verizon.net
Guest
|
| Posted: Fri May 26, 2006 5:12 am Post subject: Rotax carb sockets |
|
|
Thanks Rex,
From your experience, will a socket for a Mukni Vm-34 be compatible =
with the dimensions on the Bing 36mm ? From what I gather, they should =
be very close for the socket use. I can't imagine that there can be =
that amount of difference and a different socket for each application =
was made. Unless your, or someone else's experience suggests different, =
I'm going to risk $7 in shipping to buy "Ski-Doo Formula Plus/LT =
89-92, Formula MX/MX-LT 85-92" sockets at 7.95 each.
Thanks again,=20
Larry
Hi ! Larry,
I bought a couple of these about 12 months ago for =
=3D
when I needed them. I used to race Karts with these on and know how =3D
notorious they are for failing. Anyway I just fitted them and they hold =
=3D
the carbies a lot steadier and certainly look to be of far superior =3D
material. I am impressed but it is early days yet.
=
=3D
Rex.
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
torgemor(at)online.no
Guest
|
| Posted: Fri May 26, 2006 9:55 am Post subject: Rotax carb sockets |
|
|
OK., Folks, here it is:
http://www.mfgsupply.com/SnowCarb.html/mv_session_id=4k7kym5U
Torgeir
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
runwayrex(at)juno.com
Guest
|
| Posted: Fri May 26, 2006 12:05 pm Post subject: Rotax carb sockets |
|
|
Larry,
There's two of us Rex's on this site and you may have intended this f=
or the "big pond" guy who I think is from Australia. I have a 912, so I =
really don't know how sockets are going to work on your 582. I'm going t=
o the airport tomorrow and will post the part numbers for the 912 socket=
s.
Rex in Michigan with the Model 3, 912
=
-- "Larry Martin" <CrownLJ(at)verizon.net> wrote:
Thanks Rex,
From your experience, will a socket for a Mukni Vm-34 be compatible =3D=
with the dimensions on the Bing 36mm ? From what I gather, they should =
=3D
be very close for the socket use. I can't imagine that there can be =3D=
that amount of difference and a different socket for each application =3D=
was made. Unless your, or someone else's experience suggests different,=
=3D
I'm going to risk $7 in shipping to buy "Ski-Doo Formula Plus/LT =3D
89-92, Formula MX/MX-LT 85-92" sockets at 7.95 each.
Thanks again,=3D20
Larry
Hi ! Larry,
I bought a couple of these about 12 months ago for =3D=
=3D3D
when I needed them. I used to race Karts with these on and know how =3D3=
D
notorious they are for failing. Anyway I just fitted them and they hold=
=3D
=3D3D
the carbies a lot steadier and certainly look to be of far superior =3D3=
D
material. I am impressed but it is early days yet.
=
=3D
=3D3D
Rex.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=
=
=
<html><P>Larry,</P>
<P> There's two of us Rex's on this site and you may have in=
tended this for the "big pond" guy who I think is from Australia. I have=
a 912, so I really don't know how sockets are going to work on your 582=
. I'm going to the airport tomorrow and will post the part numbers for t=
he 912 sockets.</P>
<P>Rex in Michigan with the Model 3, 912</P>
<P> </P>
<P><BR><BR>-- "Larry Martin" <CrownLJ(at)verizon.net>&=
nbsp;wrote:<BR>--> Kitfox-List message posted by:=
"Larry Martin" <CrownLJ(at)verizon.net><BR><BR>Thanks=
Rex,<BR><BR> From your experience, will&=
nbsp;a socket for a Mukni Vm-34 be co=
mpatible =3D<BR>with the dimensions on the =
;Bing 36mm ? From what I gather,&nbs=
p;they should =3D<BR>be very close for the=
socket use. I can't imagine that&nb=
sp;there can be =3D<BR>that amount of diff=
erence and a different socket for each&nbs=
p;application =3D<BR>was made. Unless your,&nb=
sp;or someone else's experience suggests differ=
ent, =3D<BR>I'm going to risk $7 in&=
nbsp;shipping to buy "Ski-Doo Formula Plu=
s/LT =3D<BR>89-92, Formula MX/MX-LT 85-92" sock=
ets at 7.95 each.<BR><BR>Thanks again,=3D20<BR>Larry=
<BR><BR><BR>Hi ! Larry,<BR>  =
;  =
; I bought a couple of these about&nb=
sp;12 months ago for =3D<BR>=3D3D<BR>when I&nbs=
p;needed them. I used to race Karts w=
ith these on and know how =3D3D<BR>notorio=
us they are for failing. Anyway I&nb=
sp;just fitted them and they hold =3D<BR>=3D=
3D<BR>the carbies a lot steadier and certa=
inly look to be of far superior =3D3D=
<BR>material. I am impressed but it is&nbs=
p;early days yet.<BR>  =
;  =
;  =
;  =
;  =
;  =
; =3D<BR>=3D3D<BR> &=
nbsp; Rex.<BR=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- The Ki=
atronics List Features Navigator to browse<BR>_=
-=3D the many List utilities such as =
sp; &nb=
sp; &nb=
sp; &nb=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- NEW MATRONIC=
p; &nbs=
p; &nbs=
p; &nbs=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - List Contribution Web Site&nb=
nbsp; &=
nbsp; -Matt&n=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR><B=
R><BR><BR> <BR> <BR> <BR><BR><BR><BR></P></html>
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
runwayrex(at)juno.com
Guest
|
| Posted: Fri May 26, 2006 12:05 pm Post subject: Rotax carb sockets |
|
|
Larry,
There's two of us Rex's on this site and you may have intended this f=
or the "big pond" guy who I think is from Australia. I have a 912, so I =
really don't know how sockets are going to work on your 582. I'm going t=
o the airport tomorrow and will post the part numbers for the 912 socket=
s.
Rex in Michigan with the Model 3, 912
=
-- "Larry Martin" <CrownLJ(at)verizon.net> wrote:
Thanks Rex,
From your experience, will a socket for a Mukni Vm-34 be compatible =3D=
with the dimensions on the Bing 36mm ? From what I gather, they should =
=3D
be very close for the socket use. I can't imagine that there can be =3D=
that amount of difference and a different socket for each application =3D=
was made. Unless your, or someone else's experience suggests different,=
=3D
I'm going to risk $7 in shipping to buy "Ski-Doo Formula Plus/LT =3D
89-92, Formula MX/MX-LT 85-92" sockets at 7.95 each.
Thanks again,=3D20
Larry
Hi ! Larry,
I bought a couple of these about 12 months ago for =3D=
=3D3D
when I needed them. I used to race Karts with these on and know how =3D3=
D
notorious they are for failing. Anyway I just fitted them and they hold=
=3D
=3D3D
the carbies a lot steadier and certainly look to be of far superior =3D3=
D
material. I am impressed but it is early days yet.
=
=3D
=3D3D
Rex.
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=
=
=
<html><P>Larry,</P>
<P> There's two of us Rex's on this site and you may have in=
tended this for the "big pond" guy who I think is from Australia. I have=
a 912, so I really don't know how sockets are going to work on your 582=
. I'm going to the airport tomorrow and will post the part numbers for t=
he 912 sockets.</P>
<P>Rex in Michigan with the Model 3, 912</P>
<P> </P>
<P><BR><BR>-- "Larry Martin" <CrownLJ(at)verizon.net>&=
nbsp;wrote:<BR>--> Kitfox-List message posted by:=
"Larry Martin" <CrownLJ(at)verizon.net><BR><BR>Thanks=
Rex,<BR><BR> From your experience, will&=
nbsp;a socket for a Mukni Vm-34 be co=
mpatible =3D<BR>with the dimensions on the =
;Bing 36mm ? From what I gather,&nbs=
p;they should =3D<BR>be very close for the=
socket use. I can't imagine that&nb=
sp;there can be =3D<BR>that amount of diff=
erence and a different socket for each&nbs=
p;application =3D<BR>was made. Unless your,&nb=
sp;or someone else's experience suggests differ=
ent, =3D<BR>I'm going to risk $7 in&=
nbsp;shipping to buy "Ski-Doo Formula Plu=
s/LT =3D<BR>89-92, Formula MX/MX-LT 85-92" sock=
ets at 7.95 each.<BR><BR>Thanks again,=3D20<BR>Larry=
<BR><BR><BR>Hi ! Larry,<BR>  =
;  =
; I bought a couple of these about&nb=
sp;12 months ago for =3D<BR>=3D3D<BR>when I&nbs=
p;needed them. I used to race Karts w=
ith these on and know how =3D3D<BR>notorio=
us they are for failing. Anyway I&nb=
sp;just fitted them and they hold =3D<BR>=3D=
3D<BR>the carbies a lot steadier and certa=
inly look to be of far superior =3D3D=
<BR>material. I am impressed but it is&nbs=
p;early days yet.<BR>  =
;  =
;  =
;  =
;  =
;  =
; =3D<BR>=3D3D<BR> &=
nbsp; Rex.<BR=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- The Ki=
atronics List Features Navigator to browse<BR>_=
-=3D the many List utilities such as =
sp; &nb=
sp; &nb=
sp; &nb=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- NEW MATRONIC=
p; &nbs=
p; &nbs=
p; &nbs=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - List Contribution Web Site&nb=
nbsp; &=
nbsp; -Matt&n=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR><B=
R><BR><BR> <BR> <BR> <BR><BR><BR><BR></P></html>
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
Rex Hefferan
Joined: 10 Jan 2006
Posts: 147
Location: Olney Springs, Colorado USA "NOT a Kitpig"
|
| Posted: Sat May 27, 2006 8:11 pm Post subject: Rotax carb sockets |
|
|
Actually I count 3 of us Rex's on this list unless there are more that
are silent.
Rex in Colorado M2/582 (still not flying) 
Rexster wrote:
| Quote: |
Larry,
There's two of us Rex's on this site and you may have intended this f=
or the "big pond" guy who I think is from Australia. I have a 912, so I =
really don't know how sockets are going to work on your 582. I'm going t=
o the airport tomorrow and will post the part numbers for the 912 socket=
s.
Rex in Michigan with the Model 3, 912
=
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
_________________
Rex
N740GP - M2/582
Colorado |
|
| Back to top |
|
|
runwayrex(at)juno.com
Guest
|
| Posted: Sun May 28, 2006 5:20 pm Post subject: Rotax carb sockets |
|
|
Ok Guys. Here's the number of the Ski Doo sockets I've been using succes=
sfully on my 912
07-105-1
Rex in Michigan, model 3
=
-- Rex <gypsybee(at)copper.net> wrote:
Actually I count 3 of us Rex's on this list unless there are more that =
are silent.
Rex in Colorado M2/582 (still not flying)
Rexster wrote:
| Quote: |
Larry,
There's two of us Rex's on this site and you may have intended this =
f=3D
|
| Quote: | or the "big pond" guy who I think is from Australia. I have a 912, so I=
=3D
|
| Quote: | really don't know how sockets are going to work on your 582. I'm going =
t=3D
|
| Quote: | o the airport tomorrow and will post the part numbers for the 912 socke=
t=3D
|
| Quote: | s.
Rex in Michigan with the Model 3, 912
=3D
=
|
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=
=
=
<html><P>Ok Guys. Here's the number of the Ski Doo sockets I've been usi=
ng successfully on my 912</P>
<P>07-105-1</P>
<P>Rex in Michigan, model 3</P>
<P> </P>
<P><BR><BR>-- Rex <gypsybee(at)copper.net> wrote:<BR>-=
-> Kitfox-List message posted by: Rex &=
lt;gypsybee(at)copper.net><BR><BR>Actually I count 3 =
;of us Rex's on this list unless ther=
e are more that <BR>are silent.<BR>Rex in&=
nbsp;Colorado M2/582 (still not flying) :=
-(<BR><BR>Rexster wrote:<BR><BR>>--> Kitfox-List me=
ssage posted by: "Rexster" <runwayrex(at)juno.com>=
;<BR>><BR>>Larry,<BR>> There's two o=
f us Rex's on this site and you =
may have intended this f=3D<BR>>or the =
"big pond" guy who I think is from&nb=
sp;Australia. I have a 912, so I =3D<=
BR>>really don't know how sockets are g=
oing to work on your 582. I'm going&n=
bsp;t=3D<BR>>o the airport tomorrow and will=
post the part numbers for the 912&nb=
sp;socket=3D<BR>>s.<BR>>Rex in Michigan with t=
he Model 3, 912<BR>> =3D<BR>> <BR>&=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - The =
p;Matronics List Features Navigator to browse<B=
bsp;& Download, 7-Day Browse, Chat, FAQ,<BR=
=
=
=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - NEW MATRO=
nbsp; &=
nbsp; &=
nbsp; &=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- List Contribution Web Site=
p; &nbs=
p; -Mat=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR=
| Quote: | <BR><BR><BR> <BR> <BR> <BR><BR><BR><BR></P></html>
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
runwayrex(at)juno.com
Guest
|
| Posted: Sun May 28, 2006 5:28 pm Post subject: Rotax carb sockets |
|
|
Well, Let's all meet in Oshkosh!
Rex Michigan
-- Rex <gypsybee(at)copper.net> wrote:
Actually I count 3 of us Rex's on this list unless there are more that =
are silent.
Rex in Colorado M2/582 (still not flying)
Rexster wrote:
| Quote: |
Larry,
There's two of us Rex's on this site and you may have intended this =
f=3D
|
| Quote: | or the "big pond" guy who I think is from Australia. I have a 912, so I=
=3D
|
| Quote: | really don't know how sockets are going to work on your 582. I'm going =
t=3D
|
| Quote: | o the airport tomorrow and will post the part numbers for the 912 socke=
t=3D
|
| Quote: | s.
Rex in Michigan with the Model 3, 912
=3D
=
|
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
=
=
=
<html><P>Well, Let's all meet in Oshkosh!</P>
<P>Rex Michigan</P>
<P><BR><BR>-- Rex <gypsybee(at)copper.net> wrote:<BR>-=
-> Kitfox-List message posted by: Rex &=
lt;gypsybee(at)copper.net><BR><BR>Actually I count 3 =
;of us Rex's on this list unless ther=
e are more that <BR>are silent.<BR>Rex in&=
nbsp;Colorado M2/582 (still not flying) :=
-(<BR><BR>Rexster wrote:<BR><BR>>--> Kitfox-List me=
ssage posted by: "Rexster" <runwayrex(at)juno.com>=
;<BR>><BR>>Larry,<BR>> There's two o=
f us Rex's on this site and you =
may have intended this f=3D<BR>>or the =
"big pond" guy who I think is from&nb=
sp;Australia. I have a 912, so I =3D<=
BR>>really don't know how sockets are g=
oing to work on your 582. I'm going&n=
bsp;t=3D<BR>>o the airport tomorrow and will=
post the part numbers for the 912&nb=
sp;socket=3D<BR>>s.<BR>>Rex in Michigan with t=
he Model 3, 912<BR>> =3D<BR>> <BR>&=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - The =
p;Matronics List Features Navigator to browse<B=
bsp;& Download, 7-Day Browse, Chat, FAQ,<BR=
=
=
=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
sp; - NEW MATRO=
nbsp; &=
nbsp; &=
nbsp; &=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
- List Contribution Web Site=
p; &nbs=
p; -Mat=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D<BR=
| Quote: | <BR><BR><BR> <BR> <BR> <BR><BR><BR><BR></P></html>
|
| | - The Matronics Kitfox-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Kitfox-List |
|
|
|
| Back to top |
|
|
akfotoman
Joined: 19 Apr 2006
Posts: 120
Location: Anchorage, Alaska
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
