 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
brian(at)lloyd.com
Guest
|
 Posted: Thu Jun 07, 2012 8:29 am Post subject: CJ6 measurements for transport frame |
 |
|
Does anyone already have the measurements necessary to construct a frame for transporting a CJ6A airframe on a trailer? I believe I need the following:
- full measurements of the wing attach points including bolt spacing, gap, chordwise spacing, and spanwise spacing;
- length of airframe from firewall to end of empanage;
- measurements necessary to construct a cradle for the outer wing sections, e.g. max and min chord, span, and max thickness;
- measurements necessary to construct a cradle for the horizontal stab;
- measurements necessary to construct a cradle for the vertical stab.
The airframe will be transported without an engine.
Thank you!
--
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
brian(at)lloyd.com (brian(at)lloyd.com)
+1.767.617.1365 (Dominica)
+1.916.877.5067 (USA)
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
viperdoc(at)mindspring.co
Guest
|
| Posted: Thu Jun 07, 2012 9:06 am Post subject: CJ6 measurements for transport frame |
|
|
Rich HESS AT INTERNATIONAL Jets in Gadsden, Al should be able to give you that. I do not have his contact #’s at IJ though.
Doc
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Brian Lloyd
Sent: Thursday, June 07, 2012 11:27 AM
To: yak-list(at)matronics.com
Subject: CJ6 measurements for transport frame
Does anyone already have the measurements necessary to construct a frame for transporting a CJ6A airframe on a trailer? I believe I need the following:
- full measurements of the wing attach points including bolt spacing, gap, chordwise spacing, and spanwise spacing;
- length of airframe from firewall to end of empanage;
- measurements necessary to construct a cradle for the outer wing sections, e.g. max and min chord, span, and max thickness;
- measurements necessary to construct a cradle for the horizontal stab;
- measurements necessary to construct a cradle for the vertical stab.
The airframe will be transported without an engine.
Thank you!
--
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
brian(at)lloyd.com (brian(at)lloyd.com)
+1.767.617.1365 (Dominica)
+1.916.877.5067 (USA)
| Quote: | | http://www.matronics.com/Navigator?Yak-List |
01234567
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
hess737(at)aol.com
Guest
|
| Posted: Thu Jun 07, 2012 10:05 am Post subject: CJ6 measurements for transport frame |
|
|
You can call my guys at the shop at 256-442-8099
Rich
Sent from my iPad
On Jun 7, 2012, at 7:02 PM, "Roger Kemp MD" <viperdoc(at)mindspring.com (viperdoc(at)mindspring.com)> wrote:
[quote] <![endif]--> <![endif]-->
Rich HESS AT INTERNATIONAL Jets in Gadsden, Al should be able to give you that. I do not have his contact #’s at IJ though.
Doc
From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Brian Lloyd
Sent: Thursday, June 07, 2012 11:27 AM
To: yak-list(at)matronics.com (yak-list(at)matronics.com)
Subject: Yak-List: CJ6 measurements for transport frame
Does anyone already have the measurements necessary to construct a frame for transporting a CJ6A airframe on a trailer? I believe I need the following:
- full measurements of the wing attach points including bolt spacing, gap, chordwise spacing, and spanwise spacing;
- length of airframe from firewall to end of empanage;
- measurements necessary to construct a cradle for the outer wing sections, e.g. max and min chord, span, and max thickness;
- measurements necessary to construct a cradle for the horizontal stab;
- measurements necessary to construct a cradle for the vertical stab.
The airframe will be transported without an engine.
Thank you!
--
Brian Lloyd, WB6RQN/J79BPL
3191 Western Dr.
Cameron Park, CA 95682
brian(at)lloyd.com (brian(at)lloyd.com)
+1.767.617.1365 (Dominica)
+1.916.877.5067 (USA)
01234567
8
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
