|
Matronics Email Lists Web Forum Interface to the Matronics Email Lists
|
View previous topic :: View next topic |
Author |
Message |
rv10rob(at)gmail.com Guest
|
Posted: Thu Jun 28, 2012 2:21 pm Post subject: Infant carseat in the -10 |
|
|
Just to close the loop on this, I decided the current setup with the Crow seatbelts is fine. We took the little guy flying yesterday for the first time (at 3 weeks old), and it went really well. http://kochman.net/N819K/?p=1309
-Rob
On Tue, May 22, 2012 at 11:31 PM, Rob Kochman <rv10rob(at)gmail.com (rv10rob(at)gmail.com)> wrote:
Quote: | Thanks, guys... I may try getting the Van's harness to see whether it works better. How short can you make one side of the lap belt? Would prefer the buckle to be on the side, rather in the middle.
Baby is due June 12. We're really excited. When we do start flying, the plan is to have my wife in the other back seat with him.
-Rob
do not archive
On Mon, May 21, 2012 at 3:14 AM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
Quote: | When is the baby due? My wife should be having a little girl around June 19th. Not exactly our first, but precious just the same.
We have only had a baby in the plane once. We strapped in the infant carrier without the base. We have the standard Vans 4-point harnesses and it was adequate.
Jesse Saint I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
www.mavericklsa.com
C: [url=tel:352-427-0285]352-427-0285[/url]
O: [url=tel:352-465-4545]352-465-4545[/url]
F: [url=tel:815-377-3694]815-377-3694[/url]
Sent from my iPhone
On May 21, 2012, at 12:07 AM, Rob Kochman <rv10rob(at)gmail.com (rv10rob(at)gmail.com)> wrote:
Quote: | Just a few weeks away from our first kid, and I'm already thinking about flying him around. I test fit our infant (rear-facing) carseat today, and am not happy with how the lap belt of my 4-point system secures the seat (see picture). I'd rather not have the buckle in the middle. Ideally I'd use the seat base, but my seatbelt doesn't get short enough to make the base work. What have others done?
Thanks in advance for the help...
-Rob
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
<carseat_sm.jpg>
| Quote: |
get="_blank">http://www.matronics.com/Navigator?RV10-List
ttp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
|
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
|
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
[quote][b]
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
robin(at)PaintTheWeb.com Guest
|
Posted: Thu Jun 28, 2012 2:33 pm Post subject: Infant carseat in the -10 |
|
|
Nice flying family photos Rob!
Robin
Do Not Archive
From: owner-rv10-list-server(at)matronics.com [mailto:owner-rv10-list-server(at)matronics.com] On Behalf Of Rob Kochman
Sent: Thursday, June 28, 2012 3:21 PM
To: rv10-list(at)matronics.com
Subject: Re: Infant carseat in the -10
Just to close the loop on this, I decided the current setup with the Crow seatbelts is fine. We took the little guy flying yesterday for the first time (at 3 weeks old), and it went really well. http://kochman.net/N819K/?p=1309
-Rob
On Tue, May 22, 2012 at 11:31 PM, Rob Kochman <rv10rob(at)gmail.com (rv10rob(at)gmail.com)> wrote:
Thanks, guys... I may try getting the Van's harness to see whether it works better. How short can you make one side of the lap belt? Would prefer the buckle to be on the side, rather in the middle.
Baby is due June 12. We're really excited. When we do start flying, the plan is to have my wife in the other back seat with him.
-Rob
do not archive
On Mon, May 21, 2012 at 3:14 AM, Jesse Saint <jesse(at)saintaviation.com (jesse(at)saintaviation.com)> wrote:
When is the baby due? My wife should be having a little girl around June 19th. Not exactly our first, but precious just the same.
We have only had a baby in the plane once. We strapped in the infant carrier without the base. We have the standard Vans 4-point harnesses and it was adequate.
Jesse Saint
I-TEC, Inc.
jesse(at)itecusa.org (jesse(at)itecusa.org)
www.itecusa.org
www.mavericklsa.com
C: [url=tel:352-427-0285]352-427-0285[/url]
O: [url=tel:352-465-4545]352-465-4545[/url]
F: [url=tel:815-377-3694]815-377-3694[/url]
Sent from my iPhone
On May 21, 2012, at 12:07 AM, Rob Kochman <rv10rob(at)gmail.com (rv10rob(at)gmail.com)> wrote:
Quote: |
Just a few weeks away from our first kid, and I'm already thinking about flying him around. I test fit our infant (rear-facing) carseat today, and am not happy with how the lap belt of my 4-point system secures the seat (see picture). I'd rather not have the buckle in the middle. Ideally I'd use the seat base, but my seatbelt doesn't get short enough to make the base work. What have others done?
Thanks in advance for the help...
-Rob
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
<carseat_sm.jpg>
|
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
--
Rob Kochman
RV-10 Flying since March 2011
Woodinville, WA
http://kochman.net/N819K
==============[/b][/quote] V10-List Email Forum -[/b][/quote] >[/b][/quote] :p>[/b][/quote] /o:p>[/b][/quote] tor?RV10-List">http://www.matronics.com/Navigator?RV10-List[/b][/quote] ==============[/b][/quote] bsp; - MATRONICS WEB FORUMS -[/b][/quote] :p>[/b][/quote] tp://forums.matronics.com[/b][/quote] ==============[/b][/quote] bsp; - List Contribution Web Site -[/b][/quote] e> bsp; -Matt Dralle, List Admin.[/b][/quote] bution">http://www.matronics.com/contribution[/b][/quote] ==============[/b] [b]
| - The Matronics RV10-List Email Forum - | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|