Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

glide ratio XS Shortwing

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List
View previous topic :: View next topic  
Author Message
uvtreith(at)t-online.de
Guest





PostPosted: Wed Jul 04, 2012 12:38 pm    Post subject: glide ratio XS Shortwing Reply with quote

Hi Family

Is there some information about the glide ratio of the Monowheel XS (and TriGear) by maximum take off weight with or without extended flaps?
It would helpful to know by engine failure or other nice happenings how far I can fly (glide) with standing prop at say 2500 feet before I kiss the ground.
I have checked all available leaflets, brochures etc, but could find nothing.

Information about this would be very helpful.
Nice and safe flights to all,

Bruno
[quote][b]


- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
davidjoyce(at)doctors.org
Guest





PostPosted: Thu Jul 05, 2012 2:09 am    Post subject: glide ratio XS Shortwing Reply with quote

Bruno, It is easy enough to work out next time you go
flying. Just throttle right back and measure height loss
in a timed minute at speeds around 70 kts. Or you can get
a rough answer by seeing what your rate of descent settles
out at on the VSI for a given speed and knowing that 100s
of feet per minute is much the same as knots you can
divide your airspeed (say 70 kts) by the descent speed
(say 550 fpm) to give 70/5.5 =12.7, that is a glide ratio
of 1:12.7. You may feel that you need a stopped prop to
give you a proper answer, but a stopped prop is thought to
have slightly less drag than a slowly rotating one so the
actual figures would be slightly better than your
computations. For what its worth my XS mono does around
1:12 at speeds between 65 and 75 kts. The optimum glide
angle is unaffected by weight, it just happens at a
slightly higher speed if you are heavy. So the answer to
the 2500ft Q is around 5.6 statute miles/4,9nm, further if
you turn down wind. Having said all that my advice would
be to forget about calculating such things and concentrate
on flying the plane - there are a lot too many stall spin
accidents in such circumstances!
Regards, David Joyce, G-XSDJ
On Wed, 4 Jul 2012 22:37:06 +0200
"UVTREITH" <uvtreith(at)t-online.de> wrote:
Quote:
Hi Family



Is there some information about the glide ratio of the
Monowheel XS (and
TriGear) by maximum take off weight with or without
extended flaps?

It would helpful to know by engine failure or other nice
happenings how far
I can fly (glide) with standing prop at say 2500 feet
before I kiss the
ground.

I have checked all available leaflets, brochures etc,
but could find
nothing.



Information about this would be very helpful.

Nice and safe flights to all,



Bruno



- The Matronics Europa-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Europa-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group