Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Parts Needed!!!

Matronics Email Lists Forum Index -> Zenith701801-List

View previous topic :: View next topic

Author Message

striplic(at)gmail.com
Guest

Posted: Tue Aug 21, 2012 2:41 pm Post subject: Parts Needed!!!

I am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) airplanes.My newly acquired unfinished and incomplete CH701 project came from Canada. Ilive in Central Texas. Loooong hauling trip! Back then in 1987, the engine andFWF was the Rotax 532. I may try to resurrect the engine (brand new but verydated) if I can do it on the cheap. If not, I will use a 582. I am in need ofthe complete custom Rotax exhaust system, the throttle bell crank and nose forkto foot pedals control tubes as well as likely other parts. Anyone, have any ofthese? Thanks! Cliff [quote][b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

john.marzulli(at)gmail.co
Guest

Posted: Tue Aug 21, 2012 3:10 pm Post subject: Parts Needed!!!

Can you use the current nose strut and fork that Zenith sell?John Marzulli



http://MarzulliPhoto.net/

http://701Builder.blogspot.com/

  



On Tue, Aug 21, 2012 at 3:41 PM, Stripling Cliff & Carolyn <striplic(at)gmail.com (striplic(at)gmail.com)> wrote:

[quote] I am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) airplanes. My newly acquired unfinished and incomplete CH701 project came from Canada. I live in Central Texas. Loooong hauling trip! Back then in 1987, the engine and FWF was the Rotax 532. I may try to resurrect the engine (brand new but very dated) if I can do it on the cheap. If not, I will use a 582. I am in need of the complete custom Rotax exhaust system, the throttle bell crank and nose fork to foot pedals control tubes as well as likely other parts. Anyone, have any of these? Thanks! Cliff  	  Quote: 	
		  



ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	


[b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

rwehba(at)yahoo.com
Guest

Posted: Tue Aug 21, 2012 3:30 pm Post subject: Parts Needed!!!

where in central texas?/

 



 

ronnie wehba



      

  From: John Marzulli <john.marzulli(at)gmail.com>

 To:  zenith701801-list(at)matronics.com 

 Sent: Tuesday, August 21, 2012 6:10 PM

 Subject: Re: Parts Needed!!!

  

 

 Can you use the current nose strut and fork that Zenith sell?John Marzulli



http://MarzulliPhoto.net/

http://701Builder.blogspot.com/

  



On Tue, Aug 21, 2012 at 3:41 PM, Stripling Cliff & Carolyn <striplic(at)gmail.com (striplic(at)gmail.com)> wrote:

[quote] I am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) airplanes. My newly acquired unfinished and incomplete CH701 project came from Canada. I live in Central Texas. Loooong hauling trip! Back then in 1987, the engine and FWF was the Rotax 532. I may try to resurrect the engine (brand new but very dated) if I can do it on the cheap. If not, I will use a 582. I am in need of the complete custom Rotax exhaust system, the throttle bell crank and nose fork to foot pedals control tubes as well as likely other parts. Anyone, have any of these? Thanks! Cliff  	  Quote: 	
		  


ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution


	


http://www.matronics.com/Navigator?Zenith701801-List[b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

striplic(at)gmail.com
Guest

Posted: Tue Aug 21, 2012 4:24 pm Post subject: Parts Needed!!!

On Aug 21, 2012, at 6:29 PM, ron wehba wrote:

 	  Quote: 	
		  where in central texas?/

	




Marble Falls, Texas

 	  Quote: 	
		   



 

ronnie wehba



      

  From: John Marzulli <john.marzulli(at)gmail.com (john.marzulli(at)gmail.com)>

 To:  zenith701801-list(at)matronics.com (zenith701801-list(at)matronics.com) 

 Sent: Tuesday, August 21, 2012 6:10 PM

 Subject: Re: Parts Needed!!!

  

 

 Can you use the current nose strut and fork that Zenith sells?





	




I have those parts.  Mine is the older style light weight fork, but it should be serviceable since I will be using a very light engine.  You know how it is... when you buy a "complete" kit, there are always parts that somehow disappear over the years.

[quote]John Marzulli



http://MarzulliPhoto.net/

http://701Builder.blogspot.com/

  



On Tue, Aug 21, 2012 at 3:41 PM, Stripling Cliff & Carolyn <striplic(at)gmail.com (striplic(at)gmail.com)> wrote:

 	  Quote: 	
		   I am an old builder of 4 previous (Quickie, Kolb, Piper Cub and RV7A) airplanes. My newly acquired unfinished and incomplete CH701 project came from Canada. I live in Central Texas. Loooong hauling trip! Back then in 1987, the engine and FWF was the Rotax 532. I may try to resurrect the engine (brand new but very dated) if I can do it on the cheap. If not, I will use a 582. I am in need of the complete custom Rotax exhaust system, the throttle bell crank and nose fork to foot pedals control tubes as well as likely other parts. Anyone, have any of these? Thanks! Cliff  	  Quote: 	
		  



ist" target="_blank">http://www.matronics.com/Navigator?Zenith701801-List

tp://forums.matronics.com

_blank">http://www.matronics.com/contribution



	


http://www.matronics.com/Navigator?Zenith701801-List



href="http://www.matronics.com/Navigator?Zenith701801-List">http://www.matronics.com/Navigator?Zenith701801-List

href="http://forums.matronics.com/">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/contribution



	


[b]

- The Matronics Zenith701801-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Zenith701801-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Zenith701801-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum