Matronics Email Lists :: View topic - Formation fun in the Fraser Valley

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Formation fun in the Fraser Valley

Matronics Email Lists Forum Index -> RV-List

View previous topic :: View next topic

Author Message

rv7(at)b4.ca
Guest

Posted: Sun Jun 04, 2006 6:27 am Post subject: Formation fun in the Fraser Valley

Since we now have this fancy attachment system, it seems a waste not to at

least try it.  This was taken yesterday while flying between Langley, BC

and Chilliwack, BC.



-Rob



Do Not Archive

_MG_7907_(Large).JPG

Description:

Filesize:

196.4 KB

Viewed:

176 Time(s)

flyrv6(at)bryantechnology
Guest

Posted: Sun Jun 04, 2006 7:27 am Post subject: Formation fun in the Fraser Valley

Awsome picture Rob.  The list seems pretty dead this weekend, must be some event going on somewhere.

 Tim

 15 year RV-6 final assembly

  

 [i]----

Albert Gardner

Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ

Posted: Sun Jun 04, 2006 7:30 am Post subject: Formation fun in the Fraser Valley

We've always had the ability to enclose pics on the RV-10 list but please

consider the problems associated with the increase in message size when you

enclose pics. I reposted the formation pic (very impressive) after using the

powertoy suggested by Matt and with one click it reduced the formation pic

from 200K to 50K. I think it would be a good idea for us to reduce pic size

whenever possible.

Albert Gardner

40422

Yuma, AZ

http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx

--

_MG_7907_(Large)_(Small).JPG

Description:

Filesize:

50.09 KB

Viewed:

158 Time(s)

_________________
RV-9A N872RV
RV-10 N991RV

Albert Gardner

Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ

Posted: Sun Jun 04, 2006 7:32 am Post subject: Formation fun in the Fraser Valley

We've always had the ability to enclose pics on the RV-10 list but please

consider the problems associated with the increase in message size when you

enclose pics. I reposted the formation pic (very impressive) after using the

powertoy suggested by Matt and with one click it reduced the formation pic

from 200K to 50K. I think it would be a good idea for us to reduce pic size

whenever possible.

Albert Gardner

40422

Yuma, AZ

http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx

--

MG_7907_(Large)_(Small).JPG

Description:

Filesize:

50.09 KB

Viewed:

170 Time(s)

_________________
RV-9A N872RV
RV-10 N991RV

jsflyrv(at)verizon.net
Guest

Posted: Sun Jun 04, 2006 8:00 am Post subject: Formation fun in the Fraser Valley

Here we go!!!!!

 

 do not archive

 

 Albert Gardner wrote: [quote]   [quote]We've always had the ability to enclose pics on the RV-10 list but please consider the problems associated with the increase in message size when you enclose pics. I reposted the formation pic (very impressive) after using the powertoy suggested by Matt and with one click it reduced the formation pic from 200K to 50K. I think it would be a good idea for us to reduce pic size whenever possible. Albert Gardner 40422 Yuma, AZ http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx   --

retasker(at)optonline.net
Guest

Posted: Sun Jun 04, 2006 10:05 am Post subject: Formation fun in the Fraser Valley

Of course, sending a message with a more highly compressed picture twice 

cuts down on the amount one saves by compressing the picture...  I know, 

at least in my case, I would rather have a picture that is twice as 

large rather than two smaller copies of the same picture   ...



Do not archive...



Dick Tasker



Albert Gardner wrote:



 	  Quote: 	
		  We've always had the ability to enclose pics on the RV-10 list but please

consider the problems associated with the increase in message size when you

enclose pics. I reposted the formation pic (very impressive) after using the

powertoy suggested by Matt and with one click it reduced the formation pic

from 200K to 50K. I think it would be a good idea for us to reduce pic size

whenever possible.

Albert Gardner

40422

Yuma, AZ

http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx



-- 
	




Please Note: 

No trees were destroyed in the sending of this message.  We do concede, however,

that a significant number of electrons may have been temporarily inconvenienced.

--

Albert Gardner

Joined: 10 Jan 2006
Posts: 455
Location: Yuma, AZ

Posted: Sun Jun 04, 2006 10:44 am Post subject: Formation fun in the Fraser Valley

When I saw that I had sent that message twice, I knew I 'was in for it'. For

penance, I went out in the garage and drilled out 35 acceptable rivets, all

of them in hard to reach areas. Previously I used Photoshop to resize

pictures but this resizing tool works great, is fast, and the price is

right. I used it on the photos I've been taking of my RV-10 project and it

reduced them from about 400K to about 50K taking about 30 seconds to reduce

35 pictures. Now, out to the garage to set 35 rivets.

Albert Gardner

Yuma, AZ



--

_________________
RV-9A N872RV
RV-10 N991RV

Terry Watson

Joined: 09 Jan 2006
Posts: 290
Location: Seattle, WA USA

Posted: Sun Jun 04, 2006 11:26 am Post subject: Formation fun in the Fraser Valley

I think Rob's higher resolution photo was very appropriate for an aerial

photo of a formation flight with a detailed background. The lower resolution

is great for closer-up photos like we might take of an engine or airframe

detail, but when there's a lot of information or maybe for a photo of

someone's new paint job, at least for me I prefer the higher resolution. I

might not feel the same if I had dial-up.



By the way, great photo, Rob. I saved your message awhile back about taking

air to air photos. Good stuff.



Terry

Seattle




When I saw that I had sent that message twice, I knew I 'was in for it'. For

penance, I went out in the garage and drilled out 35 acceptable rivets, all

of them in hard to reach areas. Previously I used Photoshop to resize

pictures but this resizing tool works great, is fast, and the price is

right. I used it on the photos I've been taking of my RV-10 project and it

reduced them from about 400K to about 50K taking about 30 seconds to reduce

35 pictures. Now, out to the garage to set 35 rivets.

Albert Gardner

Yuma, AZ



--

retasker(at)optonline.net
Guest

Posted: Sun Jun 04, 2006 12:36 pm Post subject: Formation fun in the Fraser Valley

Boy, you really must have felt guilty if you drilled out 35 good rivets!

 

 Dick

 

 Albert Gardner wrote:

  	  Quote: 	
		      	  Quote: 	
		  --> RV-List message posted by: "Albert Gardner" <ibspud(at)adelphia.net> (ibspud(at)adelphia.net)



When I saw that I had sent that message twice, I knew I 'was in for it'. For

penance, I went out in the garage and drilled out 35 acceptable rivets, all

of them in hard to reach areas. 

  	
     	  Quote: 	
		  Do not archive...

Dick Tasker 	
 -- 

Please Note: 

No trees were destroyed in the sending of this message.  We do concede, however,

that a significant number of electrons may have been temporarily inconvenienced.

--

ceengland(at)bellsouth.ne
Guest

Posted: Sun Jun 04, 2006 4:25 pm Post subject: Formation fun in the Fraser Valley

I promise, you wouldn't feel the same if you were stuck with dialup.



The file size generated by 'smallest' using the MS software is plenty 

for viewing on a computer screen & the larger ones really hurt, when you 

get a few dozen every time you download email (multiple lists).



It's easy to check file size before attaching the photo to an email & 

the 60% of us still stuck with dialup would be grateful.



Charlie

(resident the USA, soon-to-be member of the technological third world )



Terry Watson wrote:



[quote]



I think Rob's higher resolution photo was very appropriate for an aerial

photo of a formation flight with a detailed background. The lower resolution

is great for closer-up photos like we might take of an engine or airframe

detail, but when there's a lot of information or maybe for a photo of

someone's new paint job, at least for me I prefer the higher resolution. I

might not feel the same if I had dial-up.



By the way, great photo, Rob. I saved your message awhile back about taking

air to air photos. Good stuff.



Terry

Seattle




When I saw that I had sent that message twice, I knew I 'was in for it'. For

penance, I went out in the garage and drilled out 35 acceptable rivets, all

of them in hard to reach areas. Previously I used Photoshop to resize

pictures but this resizing tool works great, is fast, and the price is

right. I used it on the photos I've been taking of my RV-10 project and it

reduced them from about 400K to about 50K taking about 30 seconds to reduce

35 pictures. Now, out to the garage to set 35 rivets.

Albert Gardner

Yuma, AZ



--

rv7(at)b4.ca
Guest

Posted: Sun Jun 04, 2006 6:44 pm Post subject: Formation fun in the Fraser Valley

On 17:18:09 2006-06-04 Charlie England <ceengland(at)bellsouth.net> wrote:

 	  Quote: 	
		   The file size generated by 'smallest' using the MS software is plenty

 for viewing on a computer screen & the larger ones really hurt, when

 you get a few dozen every time you download email (multiple lists).


	


Well, Matt has just given us carte-blanche to post items to the 'list.  If

you think a 200k image is bad, you might want to consider what will happen

when someone thinks their vacation photos would be appropriate.  For anyone

on dial-up, I would say that this list has just stopped being a viable

resource for you, and that's unfortunate.



Someone posted that I should use the Microsoft "Resize" powertoy.  If that

person had been a little more observant, they would have seen that I *did*

use the powertoy, to create that image.  I'm assuming nobody wanted the

7.5MB raw image posted to the 'list, so I compressed it to 200kB.  Any

smaller, and I believe the image loses too much of its impact.  I'm sorry

if you disagree, but as the artist I prefer that my image reflect the scene

as I saw it and the smaller images just don't do it.



Finally, i'll point out that I have only received *two* of the replies to

my original post.  The reply with the smaller image never reached me, the

suggestion to use the powertoy never reached me, and two of the other

messages referred to elsewhere in the thread never reached me either. 

Maybe this attachment thing has messed up some other part of the

distribution mechanism for the list...



-Rob



Do Not Archive

Display posts from previous:

	Matronics Email Lists Forum Index -> RV-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum