 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
sfarner
Joined: 15 Nov 2010
Posts: 10
|
 Posted: Sat Nov 17, 2012 3:33 pm Post subject: Elevator Tip Rib Question |
 |
|
Hi All- I'm trying to attach the Tip Rib assembly to the elevators, and cannot tell what the "order" should be of the parts....I believe the very top is the main skin, followed by the Tip Rib skin.
What I'm unsure about are the flanges of the E-903 Rib and the E-1002 Spar. In the attached picture, the E-903 flanges are on the outside of the E-1002 spar flanges, but then the main skin is not quite tight between the 1002 spar and main skin. It also looks like this is stressing the E-1002 flange as it pushes it down a bit.
The other option is for the E-1002 flange to be on the outside, but that creates a tiny gap between the E-903 flange and the E913 Rib Tip skin. So, nothing looks quite right, and I'm wondering what I'm missing.
I'm sure this is something basic, but I've stared at it long enough! Thank you,\
Steve Farner
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
276.48 KB |
| Viewed: |
1415 Time(s) |
|
|
|
| Back to top |
|
 |
EdKranz
Joined: 29 Dec 2010
Posts: 132
Location: Hastings, MN
|
| Posted: Sat Nov 17, 2012 5:25 pm Post subject: Elevator Tip Rib Question |
|
|
I put the rib flanges inside the spar flanges:https://picasaweb.google.com/lh/photo/sgspHys2LPDJPdi22WBl1NMTjNZETYmyPJy0liipFm0?feat=directlink
https://picasaweb.google.com/lh/photo/OrKcmLgostpF9xddmht4dNMTjNZETYmyPJy0liipFm0?feat=directlink
https://picasaweb.google.com/lh/photo/RPF0hrgtZngylLNIJb17S9MTjNZETYmyPJy0liipFm0?feat=directlink
On Sat, Nov 17, 2012 at 5:33 PM, Steve Farner <steve.farner(at)bellevue.edu (steve.farner(at)bellevue.edu)> wrote:
[quote]
Hi All- I'm trying to attach the Tip Rib assembly to the elevators, and cannot tell what the "order" should be of the parts....I believe the very top is the main skin, followed by the Tip Rib skin.
What I'm unsure about are the flanges of the E-903 Rib and the E-1002 Spar. In the attached picture, the E-903 flanges are on the outside of the E-1002 spar flanges, but then the main skin is not quite tight between the 1002 spar and main skin. It also looks like this is stressing the E-1002 flange as it pushes it down a bit.
The other option is for the E-1002 flange to be on the outside, but that creates a tiny gap between the E-903 flange and the E913 Rib Tip skin. So, nothing looks quite right, and I'm wondering what I'm missing.
I'm sure this is something basic, but I've stared at it long enough! Thank you,\
Steve Farner
[b]
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Ed Kranz
RV10
Finishing
www.edandcolleen.com |
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
