Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Resurrecting a battery

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List
View previous topic :: View next topic  
Author Message
raymondj(at)frontiernet.n
Guest





PostPosted: Sun Jan 13, 2013 8:35 pm    Post subject: Resurrecting a battery Reply with quote

Greetings,

Here's my report on trying to resurrect "killed" lead acid batteries. No success. After 48 hours on the high voltage/current limited setup neither of the lead acid open batteries or a couple of old sealed lead acid batteries I was experimenting with showed any life. I tested them for voltage about 24 hrs after the charge attempts and none read as high as 12V. I used 75W bulb instead of 100 'cause it was the only incandescent bulb I had and I figured a compact fluorescent wasn't going to work :>). I assume that that lowered the current limit but still provided the voltage I was looking for.

Bottom line. It was educational and I have one more trick to try on marginal batteries.

Thanks to everyone who contributed to the discussion. Sorry I didn't have any success to share.
Quote:
Raymond Julian
Kettle River, MN.

"And you know that I could have me a million more friends,
and all I'd have to lose is my point of view." - John Prine
On 09/28/2012 04:42 PM, rayj wrote:

[quote]--> AeroElectric-List message posted by: rayj <raymondj(at)frontiernet.net> (raymondj(at)frontiernet.net)

On 09/28/2012 01:12 PM, Robert L. Nuckolls, III wrote:


Quote:
You can put a 100w light bulb in series with a diode
bridge rectifier and use this as a current limited source of
high voltage to hook to your battery(ies). Watch the voltage across
the battery. If the chemistry is coming awake, the voltage
should begin to drop and ultimately level off at normal
levels expected for a 1 amp constant current charge.
Here's where my ignorance starts showing. Is this setup using mains voltage? Rectified and current limited? 120+ volts DC, current limited to 1-2 amps?

Raymond Julian
Kettle River, MN.

"And you know that I could have me a million more friends,
and all I'd have to lose is my point of view." - John Prine




























[b]


- The Matronics AeroElectric-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> AeroElectric-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group