 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
vernon.franklin(at)gmail.
Guest
|
 Posted: Sun Jan 20, 2013 2:30 pm Post subject: Cabin Top Woes |
 |
|
I need some advice. I am trying to fit the cabin top, and it just wont fit into the door area.
As you can see from the attached pics, I have a 37 1/16" space to work with. But if I sand the cabin top down that far, I am almost in the door channel.
Did anyone else have to sand down this far? How far is to far to sand?
Also, did anyone else's "scribe lines" seem completely random, and at times be almost 1/2" off completely? I have attached a picture example of that as well.
[img]cid:ii_13c5a1496743bb4a[/img][img]cid:ii_13c5a12a9a395c36[/img][img]cid:ii_13c5a128244ff057[/img]
--
Vernon Franklin
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
140.97 KB |
| Viewed: |
3259 Time(s) |
|
| Description: |
|
| Filesize: |
108.56 KB |
| Viewed: |
3259 Time(s) |
|
| Description: |
|
| Filesize: |
141.98 KB |
| Viewed: |
3259 Time(s) |
|
|
|
| Back to top |
|
 |
john(at)trollingers.com
Guest
|
| Posted: Sun Jan 20, 2013 2:48 pm Post subject: Cabin Top Woes |
|
|
Just keep sanding, it will eventually fit. I would go from side to side so that each side had about the same amount of materiel left when I was done. The scribe lines are almost meaning less.
John
On Sun, Jan 20, 2013 at 5:30 PM, Vernon Franklin <vernon.franklin(at)gmail.com (vernon.franklin(at)gmail.com)> wrote:
| Quote: | I need some advice. I am trying to fit the cabin top, and it just wont fit into the door area.
As you can see from the attached pics, I have a 37 1/16" space to work with. But if I sand the cabin top down that far, I am almost in the door channel.
Did anyone else have to sand down this far? How far is to far to sand?
Also, did anyone else's "scribe lines" seem completely random, and at times be almost 1/2" off completely? I have attached a picture example of that as well.
[img]cid:ii_13c5a1496743bb4a[/img][img]cid:ii_13c5a12a9a395c36[/img][img]cid:ii_13c5a128244ff057[/img]
--
Vernon Franklin
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
108.56 KB |
| Viewed: |
3259 Time(s) |
|
| Description: |
|
| Filesize: |
140.97 KB |
| Viewed: |
3259 Time(s) |
|
| Description: |
|
| Filesize: |
141.98 KB |
| Viewed: |
3259 Time(s) |
|
|
|
| Back to top |
|
|
tsts4
Joined: 06 Aug 2007
Posts: 167
Location: Tampa, FL
|
| Posted: Sun Jan 20, 2013 3:10 pm Post subject: Re: Cabin Top Woes |
|
|
What John said. I was real surprised how much past the scribe lines I had to go on both the top and the doors to get everything to fit. It's tedious, but keep at it a little at a time. I got real good at being able to lift the top into place solo in order to do a fit check.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
_________________
Todd Stovall
aka "Auburntsts" on EAA and VAF
RV-10 N728TT -- Flying
Last edited by tsts4 on Sun Jan 20, 2013 4:06 pm; edited 1 time in total |
|
| Back to top |
|
|
dave.saylor.aircrafters(a
Guest
|
| Posted: Sun Jan 20, 2013 3:54 pm Post subject: Cabin Top Woes |
|
|
You're right, you might be taking a little of the back of the door frame off. That's normal. Just make it fit. Same is true for the bottom edge. It gets pretty thin.
--Dave
On Jan 20, 2013, at 14:30, Vernon Franklin <vernon.franklin(at)gmail.com> wrote:
| Quote: | I need some advice. I am trying to fit the cabin top, and it just wont fit into the door area.
As you can see from the attached pics, I have a 37 1/16" space to work with. But if I sand the cabin top down that far, I am almost in the door channel.
Did anyone else have to sand down this far? How far is to far to sand?
Also, did anyone else's "scribe lines" seem completely random, and at times be almost 1/2" off completely? I have attached a picture example of that as well.
<image.jpeg><image.jpeg><image.jpeg>
--
Vernon Franklin
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
bill.peyton
Joined: 19 Sep 2010
Posts: 198
Location: St. Louis, MO
|
| Posted: Sun Jan 20, 2013 5:48 pm Post subject: Re: Cabin Top Woes |
|
|
I attached some photos of mine after trimming.
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
| Description: |
|
| Filesize: |
85.13 KB |
| Viewed: |
3234 Time(s) |
|
| Description: |
|
| Filesize: |
85.72 KB |
| Viewed: |
3234 Time(s) |
|
| Description: |
|
| Filesize: |
106.82 KB |
| Viewed: |
3234 Time(s) |
|
| Description: |
|
| Filesize: |
78.12 KB |
| Viewed: |
3234 Time(s) |
|
_________________
Bill
WA0SYV
Aviation Partners, LLC |
|
| Back to top |
|
|
rv10free2fly(at)yahoo.com
Guest
|
| Posted: Mon Jan 21, 2013 3:20 am Post subject: Cabin Top Woes |
|
|
Vernon,
I had to go past the scribe lines too. Regrettably the 'standard fit' is tight and variable due to the imprecise nature of the fibreglass moulding. Just keep sanding and trimming until it all fits. It's tight, but you eventually get there.
Warm regards
Patrick
On 21/01/2013, at 9:00 AM, Vernon Franklin <vernon.franklin(at)gmail.com> wrote:
| Quote: | I need some advice. I am trying to fit the cabin top, and it just wont fit into the door area.
As you can see from the attached pics, I have a 37 1/16" space to work with. But if I sand the cabin top down that far, I am almost in the door channel.
Did anyone else have to sand down this far? How far is to far to sand?
Also, did anyone else's "scribe lines" seem completely random, and at times be almost 1/2" off completely? I have attached a picture example of that as well.
<image.jpeg><image.jpeg><image.jpeg>
--
Vernon Franklin
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
Mauledriver(at)nc.rr.com
Guest
|
| Posted: Mon Jan 21, 2013 7:21 am Post subject: Cabin Top Woes |
|
|
Same here - and I go back to the older green top.
It occurs to me that fiberglass top is actually pretty consistent from
part to part - even green to pink. They all fit the same way is rather
crudely. I'd venture to say everyone has to go past the scribe lines
(they are a good starting point) and everyone ends up with some very
thin areas. The same thin areas from what I can see in this thread.
I have 2 Kit log pages here that won't be much help but I talk a bit
about tools. The only thing I can say with confidence is either work
outside or get a filter bag for your shop vac.
http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project=224&category=2155&log=55674&row=12
It gets better,
Bill
On 1/21/2013 6:24 AM, Patrick Pulis wrote:
| Quote: |
Vernon,
I had to go past the scribe lines too. Regrettably the 'standard fit' is tight and variable due to the imprecise nature of the fibreglass moulding. Just keep sanding and trimming until it all fits. It's tight, but you eventually get there.
Warm regards
Patrick
On 21/01/2013, at 9:00 AM, Vernon Franklin <vernon.franklin(at)gmail.com> wrote:
> I need some advice. I am trying to fit the cabin top, and it just wont fit into the door area.
>
> As you can see from the attached pics, I have a 37 1/16" space to work with. But if I sand the cabin top down that far, I am almost in the door channel.
>
> Did anyone else have to sand down this far? How far is to far to sand?
>
> Also, did anyone else's "scribe lines" seem completely random, and at times be almost 1/2" off completely? I have attached a picture example of that as well.
> <image.jpeg><image.jpeg><image.jpeg>
>
> --
> Vernon Franklin
-----
No virus found in this message.
Checked by AVG - www.avg.com
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
kearney
Joined: 20 Sep 2008
Posts: 563
|
| Posted: Mon Jan 21, 2013 9:01 am Post subject: Cabin Top Woes |
|
|
Hi
For those who can, part of Dave Saylor's composite course is seeing how a canopy is trimmed. Once you see what is involved, it becomes a much less daunting task. It is the not knowing that causes the apprehension when trimming.
Dave's guys make it look easy peasy.
Cheers
Les
Sent from my iPhone
On 2013-01-21, at 8:21 AM, Bill Watson <Mauledriver(at)nc.rr.com> wrote:
| Quote: |
Same here - and I go back to the older green top.
It occurs to me that fiberglass top is actually pretty consistent from part to part - even green to pink. They all fit the same way is rather crudely. I'd venture to say everyone has to go past the scribe lines (they are a good starting point) and everyone ends up with some very thin areas. The same thin areas from what I can see in this thread.
I have 2 Kit log pages here that won't be much help but I talk a bit about tools. The only thing I can say with confidence is either work outside or get a filter bag for your shop vac.
http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project=224&category=2155&log=55674&row=12
It gets better,
Bill
On 1/21/2013 6:24 AM, Patrick Pulis wrote:
>
>
> Vernon,
>
> I had to go past the scribe lines too. Regrettably the 'standard fit' is tight and variable due to the imprecise nature of the fibreglass moulding. Just keep sanding and trimming until it all fits. It's tight, but you eventually get there.
>
> Warm regards
>
> Patrick
>
> On 21/01/2013, at 9:00 AM, Vernon Franklin <vernon.franklin(at)gmail.com> wrote:
>
>> I need some advice. I am trying to fit the cabin top, and it just wont fit into the door area.
>>
>> As you can see from the attached pics, I have a 37 1/16" space to work with. But if I sand the cabin top down that far, I am almost in the door channel.
>>
>> Did anyone else have to sand down this far? How far is to far to sand?
>>
>> Also, did anyone else's "scribe lines" seem completely random, and at times be almost 1/2" off completely? I have attached a picture example of that as well.
>> <image.jpeg><image.jpeg><image.jpeg>
>>
>> --
>> Vernon Franklin
>
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
rv10free2fly(at)yahoo.com
Guest
|
| Posted: Mon Jan 21, 2013 11:41 am Post subject: Cabin Top Woes |
|
|
Vernon,
I found a pneumatic die grinder with one of the blades supplied in the kit to be the best way to trim the cabin top. Thereafter I used an orbital pneumatic sander (with inbuilt vacuum bag - cost me $39) with 80 grit paper to be the best tool. A pneumatic air file was also used to get into the corners.
I hope this helps.
Warm regards
Patrick
On 22/01/2013, at 1:51 AM, Bill Watson <Mauledriver(at)nc.rr.com> wrote:
| Quote: |
Same here - and I go back to the older green top.
It occurs to me that fiberglass top is actually pretty consistent from part to part - even green to pink. They all fit the same way is rather crudely. I'd venture to say everyone has to go past the scribe lines (they are a good starting point) and everyone ends up with some very thin areas. The same thin areas from what I can see in this thread.
I have 2 Kit log pages here that won't be much help but I talk a bit about tools. The only thing I can say with confidence is either work outside or get a filter bag for your shop vac.
http://www.mykitlog.com/users/display_log.php?user=MauleDriver&project=224&category=2155&log=55674&row=12
It gets better,
Bill
On 1/21/2013 6:24 AM, Patrick Pulis wrote:
>
>
> Vernon,
>
> I had to go past the scribe lines too. Regrettably the 'standard fit' is tight and variable due to the imprecise nature of the fibreglass moulding. Just keep sanding and trimming until it all fits. It's tight, but you eventually get there.
>
> Warm regards
>
> Patrick
>
> On 21/01/2013, at 9:00 AM, Vernon Franklin <vernon.franklin(at)gmail.com> wrote:
>
>> I need some advice. I am trying to fit the cabin top, and it just wont fit into the door area.
>>
>> As you can see from the attached pics, I have a 37 1/16" space to work with. But if I sand the cabin top down that far, I am almost in the door channel.
>>
>> Did anyone else have to sand down this far? How far is to far to sand?
>>
>> Also, did anyone else's "scribe lines" seem completely random, and at times be almost 1/2" off completely? I have attached a picture example of that as well.
>> <image.jpeg><image.jpeg><image.jpeg>
>>
>> --
>> Vernon Franklin
>
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
>
>
|
| | - The Matronics RV10-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?RV10-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
