Matronics Email Lists :: View topic - Torque Tube Clamp Mod. into production ...

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Torque Tube Clamp Mod. into production ...

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

ptag.dev(at)talktalk.net
Guest

Posted: Mon Jan 14, 2013 1:16 am Post subject: Torque Tube Clamp Mod. into production ...

Hi! Sorry for promotional but if it helps you to know we are now setting up to produce a small quantity of the latest design of clamps. 

Now is the time to join the order list should you be interested.

Best regards and wishes to all Europa Flyers for a safe 2013.

Bob Harrison  G-PTAG

  [quote][b]

Richard Lamprey

Joined: 15 Jul 2011
Posts: 95
Location: Kenya

Posted: Mon Jan 14, 2013 11:52 pm Post subject: Re: Torque Tube Clamp Mod. into production ...

Bob, please put me on the list.



I have zero play on the original pins, after 600 hours, but it will be good to have the clamps for the future.... you never know



Richard, Kenya

Europa Classic 5Y-LRY

frans(at)privatepilots.nl
Guest

Posted: Tue Jan 15, 2013 12:31 am Post subject: Torque Tube Clamp Mod. into production ...

On 01/14/2013 10:14 AM, Bob Harrison wrote:

 	  Quote: 	
		   Hi! Sorry for promotional but if it helps you to know we are now setting

 up to produce a small quantity of the latest design of clamps.

 

 Now is the time to join the order list should you be interested.


	


Still zero play, but please put me on the list, just in case I need it

in the future.



Frans

FTower(at)cbmove.com
Guest

Posted: Thu Jan 17, 2013 12:14 pm Post subject: Torque Tube Clamp Mod. into production ...

Dear Bob;

 

Please add me to your list for the new torque tube clamp mod you will be producing.  E-mail is ftower(at)cbmove.com <mailto:ftower(at)cbmove.com> .  Cell phone is 410 991 6037 and address 9 Franklin Street, Annapolis, Maryland, 21401, United States.  I have kit 631,   

                                                        Sincerely, 

 

                                                        Fred Tower 



________________________________



From: owner-europa-list-server(at)matronics.com on behalf of Bob Harrison

Sent: Mon 1/14/2013 4:14 AM

To: Europa Matronic Circuit 

Subject: Torque Tube Clamp Mod. into production ...



Hi! Sorry for promotional but if it helps you to know we are now setting up to produce a small quantity of the latest design of clamps. 



Now is the time to join the order list should you be interested.



Best regards and wishes to all Europa Flyers for a safe 2013.



Bob Harrison  G-PTAG

Please consider the environment before printing this email.





This electronic mail message transmission may contain privileged, confidential, copyrighted, or other legally protected information.  If you are not the intended recipient (even if the e-mail address above is yours), you may not use, copy or re-transmit it.  If you have received this by mistake, please notify us by return email, then delete.  Thank you.  





The sender believes that this electronic mail transmission and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. Neither the sender nor his or her employer is liable for any loss or damage arising in any way from this message or its attachments.

groups(at)thegoddards.com
Guest

Posted: Sat Jan 19, 2013 5:01 pm Post subject: Torque Tube Clamp Mod. into production ...

Please put me on the list for the clamps.

 

Vince Goddard

G-BWUP

ULPower UL260iS

 

From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of Bob Harrison

Sent: 14 January 2013 09:15

To: Europa Matronic Circuit 

Subject: Torque Tube Clamp Mod. into production ...

 

Hi! Sorry for promotional but if it helps you to know we are now setting up to produce a small quantity of the latest design of clamps. 

Now is the time to join the order list should you be interested.

Best regards and wishes to all Europa Flyers for a safe 2013.

Bob Harrison  G-PTAG[quote] [b]

avgashead(at)btinternet.c
Guest

Posted: Sun Jan 20, 2013 1:06 am Post subject: Torque Tube Clamp Mod. into production ...

Likewise, if I could my name down for a set of clamps.

Richard Scanlan

G CEIW



Sent from my iPad



On 20 Jan 2013, at 00:59, "Vince (Groups Email)" <groups(at)thegoddards.com (groups(at)thegoddards.com)> wrote:



[quote]  <![endif]-->   <![endif]-->

Please put me on the list for the clamps.

 

Vince Goddard

G-BWUP

ULPower UL260iS

 

From: owner-europa-list-server(at)matronics.com (owner-europa-list-server(at)matronics.com) [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of Bob Harrison

Sent: 14 January 2013 09:15

To: Europa Matronic Circuit 

Subject: Europa-List: Torque Tube Clamp Mod. into production ...

 

Hi! Sorry for promotional but if it helps you to know we are now setting up to produce a small quantity of the latest design of clamps. 

Now is the time to join the order list should you be interested.

Best regards and wishes to all Europa Flyers for a safe 2013.

Bob Harrison  G-PTAG 	  Quote: 	
		   



===================================

tp://www.matronics.com/Navigator?Europa-List

===================================

cs.com

===================================

matronics.com/contribution

===================================



	


[b]

milneab(at)btinternet.com
Guest

Posted: Sun Jan 27, 2013 12:37 am Post subject: Torque Tube Clamp Mod. into production ...

Dear Bob,

  

 Please add me to the list of customers for your Europa torque tube  clamps.

  

 Yours,

  

 Alasdair

    

  From: Bob Harrison (ptag.dev(at)talktalk.net) 

 Sent: Monday, January 14, 2013 9:14 AM

 To: Europa Matronic Circuit  (europa-list(at)matronics.com)

 Subject: Torque Tube Clamp Mod. into production  ..

  



   

Hi! Sorry for promotional but if it helps you to know we are  now setting up to produce a small quantity of the latest design of clamps.   

Now is the time to join the order list should you be  interested. 

Best regards and wishes to all Europa Flyers for a safe  2013. 

Bob Harrison  G-PTAG

[quote]



href="http://www.matronics.com/Navigator?Europa-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c

[b]

danny shepherd

Joined: 27 Jan 2006
Posts: 117
Location: north Wales, United Kingdom

Posted: Sun Jan 27, 2013 2:46 am Post subject: Torque Tube Clamp Mod. into production ...

Hi Bob,

                    My torque tube seems ok at the moment, but looking to       the future could you put me down for a set of your clamps.

       

       Cheers Danny Shepherd. G-ceri

       

       01745 583728

       07767088833

       

       

       

       On 27/01/2013 08:36, Alasdair Milne wrote:

     

     [quote]                                                Dear Bob,

            

           Please add me to the list of customers for your Europa             torque tube clamps.

            

           Yours,

            

           Alasdair

                                        

                                From: Bob Harrison (ptag.dev(at)talktalk.net)                 

                 Sent: Monday, January 14, 2013 9:14 AM

                 To: Europa                     Matronic Circuit  (europa-list(at)matronics.com)

                 Subject: Torque Tube Clamp Mod.                   into production ...

               

             

              

           

                                       

Hi! Sorry for promotional but if it                 helps you to know we are now setting up to produce a                 small quantity of the latest design of clamps.                

Now is the time to join the order                 list should you be interested.               

Best regards and wishes to all Europa                 Flyers for a safe 2013.               

Bob Harrison  G-PTAG             

              	  Quote: 	
		  



href="http://www.matronics.com/Navigator?Europa-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.com

href="http://www.matronics.com/contribution">http://www.matronics.com/c



	
     [b]

ptag.dev(at)talktalk.net
Guest

Posted: Sun Jan 27, 2013 5:58 am Post subject: Torque Tube Clamp Mod. into production ...

Hi! Danny, Got your sentiment ...Ok but.........very respectfully...

I suggest you have a case of false economy ...don’t wait for slop to develop ...since the clamps were never intended for use to replace slop without a new upsize of the pins simultaneously. To do it now will allow you to proceed without a pin re-drill and upsize.

However of course that is your prerogative entirely.

Best regards

Bob Harrison.

 

From: owner-europa-list-server(at)matronics.com [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of danny shepherd

Sent: 27 January 2013 10:46

To: europa-list(at)matronics.com

Subject: Re: Torque Tube Clamp Mod. into production ...

 

Hi Bob,

             My torque tube seems ok at the moment, but looking to the future could you put me down for a set of your clamps.



Cheers Danny Shepherd. G-ceri



01745 583728

07767088833



On 27/01/2013 08:36, Alasdair Milne wrote:

 	  Quote: 	
		  

Dear Bob,



 



Please add me to the list of customers for your Europa torque tube clamps.



 



Yours,



 



Alasdair



 



From: Bob Harrison (ptag.dev(at)talktalk.net) 



Sent: Monday, January 14, 2013 9:14 AM



To: Europa Matronic Circuit  (europa-list(at)matronics.com)



Subject: Torque Tube Clamp Mod. into production ..



 

Hi! Sorry for promotional but if it helps you to know we are now setting up to produce a small quantity of the latest design of clamps. 

Now is the time to join the order list should you be interested.

Best regards and wishes to all Europa Flyers for a safe 2013.

Bob Harrison  G-PTAG 	  Quote: 	
		    href="http://www.matronics.com/Navigator?Europa-List">http://www.matronhref="http://forums.matronics.com">http://forums.matronics.comhref="http://www.matronics.com/contribution">http://www.matronics.com/c   	
	


  	  Quote: 	
		         - The Europa-List Email Forum utilities such as List Photoshare, and much much    --> http://www.matron===================[/b]http://forums.matronics.com         - List Contribution Web generous nbsp;                        --> http://www.matronics.com/c=[/b] 	


  [quote][b]

peterandbettyharrod(at)bt
Guest

Posted: Mon Jan 28, 2013 12:22 pm Post subject: Torque Tube Clamp Mod. into production ...

Hi Bob,



Please add me to your list for a set of torque tube clamps. ( I am slimming in anticipation ) Kit 481 progressing.



Yours,  



Peter.

gregoryf.flyboy(at)comcas
Guest

Posted: Thu Jan 31, 2013 2:40 pm Post subject: Torque Tube Clamp Mod. into production ...

Hi Bob,

  

 Please add me to your list for the clamp, as well.  

  

 thankyou,

  

 Greg Fuchs



   From: owner-europa-list-server(at)matronics.com  [mailto:owner-europa-list-server(at)matronics.com] On Behalf Of Bob  Harrison

Sent: Monday, January 14, 2013 1:15 AM

To: Europa  Matronic Circuit 

Subject: Torque Tube Clamp Mod. into  production ...

 

  

Hi! Sorry for promotional but if it helps you to know we are  now setting up to produce a small quantity of the latest design of clamps.   

Now is the time to join the order list should you be  interested. 

Best regards and wishes to all Europa Flyers for a safe  2013. 

Bob Harrison  G-PTAG

[quote]

 

_===================================

=          - The Europa-List Email Forum -

_= Use the Matronics List Features Navigator to browse

_= the many List utilities such as List Un/Subscription,

_= Archive Search & Download, 7-Day Browse, Chat, FAQ,

_= Photoshare, and much much more:

_=

_=   --> http://www.matronics.com/Navigator?Europa-List

_=

_========================_=               - MATRONICS WEB FORUMS -

_= Same great content also available via the Web Forums!

_=

_=   --> http://forums.matronics.com

_=

_========================_=             - List Contribution Web Site -

_=  Thank you for your generous support!

_=                              -Matt Dralle, List Admin.

_=   --> http://www.matronics.com/contribution

_===================================



do not archive [b]

FTower(at)cbmove.com
Guest

Posted: Fri Feb 08, 2013 7:55 am Post subject: Torque Tube Clamp Mod. into production ...

Dear Bob

When I asked to be put on the list for the new torque tube clamps, I didn't realize that they are intended to solve a problem that the older torque tubes had.  My torque tube came with kit 631, shipped in January, 2012, and I assume from the diagrams that it is a different and non-compatable design.

 

                                please forgive the inconvenience.

                                                   

                                                   Fred Tower



________________________________



From: owner-europa-list-server(at)matronics.com on behalf of danny shepherd

Sent: Sun 1/27/2013 5:45 AM

To: europa-list(at)matronics.com

Subject: Re: Torque Tube Clamp Mod. into production ...

Hi Bob,

             My torque tube seems ok at the moment, but looking to the future could you put me down for a set of your clamps.



Cheers Danny Shepherd. G-ceri



01745 583728

07767088833



On 27/01/2013 08:36, Alasdair Milne wrote:

	Dear Bob,

	 

	Please add me to the list of customers for your Europa torque tube clamps.

	 

	Yours,

	 

	Alasdair

	 

	From: Bob Harrison <mailto:ptag.dev(at)talktalk.net>  

	Sent: Monday, January 14, 2013 9:14 AM

	To: Europa Matronic Circuit <mailto:europa-list(at)matronics.com> 

	Subject: Torque Tube Clamp Mod. into production ...

	 



	Hi! Sorry for promotional but if it helps you to know we are now setting up to produce a small quantity of the latest design of clamps. 



	Now is the time to join the order list should you be interested.



	Best regards and wishes to all Europa Flyers for a safe 2013.



	Bob Harrison  G-PTAG



	

	

	href="http://www.matronics.com/Navigator?Europa-List" <http://www.matronics.com/Navigator?Europa-List> >http://www.matronhref= <http://www.matronhref=/> "http://forums.matronics.com" <http://forums.matronics.com/> >http://forums.matronics.com <http://forums.matronics.com/> 

	href="http://www.matronics.com/contribution" <http://www.matronics.com/contribution> >http://www.matronics.com/c

	

	

	

	

	



Please consider the environment before printing this email.





This electronic mail message transmission may contain privileged, confidential, copyrighted, or other legally protected information.  If you are not the intended recipient (even if the e-mail address above is yours), you may not use, copy or re-transmit it.  If you have received this by mistake, please notify us by return email, then delete.  Thank you.  





The sender believes that this electronic mail transmission and any attachments were free of any virus, worm, Trojan horse, and/or malicious code when sent. This message and its attachments could have been infected during transmission. By reading the message and opening any attachments, the recipient accepts full responsibility for taking protective and remedial action about viruses and other defects. Neither the sender nor his or her employer is liable for any loss or damage arising in any way from this message or its attachments.





Nothing in this email shall be deemed to create a binding contract to purchase/sell real estate.  The sender of this email does not have the authority to bind a buyer or seller to a contract via written or verbal communications including, but not limited to, email communications.

John Price

Joined: 02 Dec 2007
Posts: 19

Posted: Sat Feb 09, 2013 1:43 am Post subject: Re: Torque Tube Clamp Mod. into production ...

Hi Bob,



Just catching up on about 1000 emails.



Could I also have a set.



Best regards.



John Price.

G-SHSH



PS  Anybody know how  the fuel filler hose mod is coming along ?

petros

Joined: 29 Aug 2011
Posts: 2
Location: UK

Posted: Mon Feb 11, 2013 6:48 am Post subject: Re: Torque Tube Clamp Mod. into production ...

Bob,

      Will you please add me to the list of those wanting the clamps.

                   Regards,

                           Peter Curley

                              G-DEBR.

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum