Matronics Email Lists :: View topic - SS7 rudder pedal install question

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

SS7 rudder pedal install question

Matronics Email Lists Forum Index -> Kitfox-List

View previous topic :: View next topic

Author Message

n223rv(at)wolflakeairport
Guest

Posted: Fri May 03, 2013 3:32 pm Post subject: SS7 rudder pedal install question

I am building a SS7 and am getting ready to fab and install the adjustable rudder pedals.  One question I have while reading the plans, I don't see how you space the inboard pedal so the 2 bolts holding the adjustable pedal control wheels do not contact each other.  It seems that the bolt heads will hit after you install the plastic bushings and drill the assembly to keep your 1/32" side to side clearance.



What am I missing?  Picture attached.



Thanks



-Mike Kraus

RV-4 sold 

RV-10 flying 

KitFox SS7 Radial building 





<pre><b><font size=3D2 color="#000000" face=3D"courier new,courier">

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

image.png

Description:

Filesize:

314.03 KB

Viewed:

4138 Time(s)

7suds(at)Chartermi.net
Guest

Posted: Tue May 07, 2013 6:29 pm Post subject: SS7 rudder pedal install question

Mike,

Not sure if anyone has had an opportunity to help you yet, I am in the

middle of replacing my rudder cables on my Model 5, so I am working with the

very items you have concern with. I will snap a shot of my standoffs for the

pulleys next time I'm at the hanger. From what I remember, my screw heads

have clearance and the only difference from your pic is the bushing you have

laying in front of your shaft is installed on mine and seems to help create

the separation you are looking for. 



Lloyd C  KF 5 Outback 

912ul IVO IFA Northern Mi

--

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

n223rv(at)wolflakeairport
Guest

Posted: Tue May 07, 2013 7:03 pm Post subject: SS7 rudder pedal install question

Hi Lloyd,



Thanks for the reply.  I am going to sand off the paint and install the bushings, but from looking at it, it doesn't appear the bushing will give me enough spacing.  Maybe once I assemble it, it will become more clear.



Where in northern Mi are you?  I'm at 26W near Jackson. 



-Mike Kraus

RV-4 sold 

RV-10 flying 

KitFox SS7 Radial building 



On May 7, 2013, at 10:29 PM, "Lloyd & Lorrie Cudnohufsky" <7suds(at)Chartermi.net> wrote:



[quote] 

 

 Mike,

 Not sure if anyone has had an opportunity to help you yet, I am in the

 middle of replacing my rudder cables on my Model 5, so I am working with the

 very items you have concern with. I will snap a shot of my standoffs for the

 pulleys next time I'm at the hanger. From what I remember, my screw heads

 have clearance and the only difference from your pic is the bushing you have

 laying in front of your shaft is installed on mine and seems to help create

 the separation you are looking for. 

 

 Lloyd C  KF 5 Outback 

 912ul IVO IFA Northern Mi

 

 

 --

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Lynn Matteson

Joined: 10 Jan 2006
Posts: 2778
Location: Grass Lake, Michigan

Posted: Wed May 08, 2013 11:38 am Post subject: SS7 rudder pedal install question

26W????  That's practically my backyard....do I know you, Mike? I fly  

in there from time to time with my orange Kitfox IV, and have done so  

on wheels and skis. I didn't know there was a Kitfox being built in  

the area.



Lynn Matteson

Kitfox IV Speedster, taildragger

Jabiru 2200, #2062

Prince prop 64 x 30, P-tip

Electroair direct-fire ignition system

Rotec TBI-40 injection (sleeved to 36mm)

Status: flying with 1430 hrs... (since 3-27-2006)



On May 7, 2013, at 11:02 PM, Michael Kraus wrote:



[quote] 

 <n223rv(at)wolflakeairport.net>



 Hi Lloyd,



 Thanks for the reply.  I am going to sand off the paint and install  

 the bushings, but from looking at it, it doesn't appear the bushing  

 will give me enough spacing.  Maybe once I assemble it, it will  

 become more clear.



 Where in northern Mi are you?  I'm at 26W near Jackson.



 -Mike Kraus

 RV-4 sold 

 RV-10 flying 

 KitFox SS7 Radial building 



 On May 7, 2013, at 10:29 PM, "Lloyd & Lorrie Cudnohufsky"  

 <7suds(at)Chartermi.net> wrote:



> 

> <7suds(at)chartermi.net>

>

> Mike,

> Not sure if anyone has had an opportunity to help you yet, I am in  

> the

> middle of replacing my rudder cables on my Model 5, so I am  

> working with the

> very items you have concern with. I will snap a shot of my  

> standoffs for the

> pulleys next time I'm at the hanger. From what I remember, my  

> screw heads

> have clearance and the only difference from your pic is the  

> bushing you have

> laying in front of your shaft is installed on mine and seems to  

> help create

> the separation you are looking for.

>

> Lloyd C  KF 5 Outback

> 912ul IVO IFA Northern Mi

> --

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

_________________
Lynn
Kitfox IV-Jabiru 2200
N369LM

7suds(at)Chartermi.net
Guest

Posted: Thu May 09, 2013 3:45 pm Post subject: SS7 rudder pedal install question

Hello Mike,

I'm at KIMT Ford Airport, out of Iron Mountain in the upper peninsula. , I

have yet to make it back to the hanger, so I have no pics of my peddles to

share, it has been a rough week at work, looking forward to the weekend.  

Also, I see you have a little experience with RV's, my hanger partner has an

RV-7A, he is pushing 600 hours flying time on it, it is a hoot to fly in.



Lloyd 



--

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

n223rv(at)wolflakeairport
Guest

Posted: Thu May 09, 2013 4:59 pm Post subject: SS7 rudder pedal install question

To circle back, I forwarded my note to John McBean.  He said there are a few builders who have the problem I mentioned and they have created a bushing with a wider flange to ensure the bolt head clearances.  He is going to send me out a set!  Sounds like I'm all set.



Thanks



-Mike Kraus

RV-4 sold 

RV-10 flying 

KitFox SS7 Radial building 



On May 9, 2013, at 7:44 PM, "Lloyd & Lorrie Cudnohufsky" <7suds(at)Chartermi.net> wrote:



[quote] 

 

 Hello Mike,

 I'm at KIMT Ford Airport, out of Iron Mountain in the upper peninsula. , I

 have yet to make it back to the hanger, so I have no pics of my peddles to

 share, it has been a rough week at work, looking forward to the weekend.  

 Also, I see you have a little experience with RV's, my hanger partner has an

 RV-7A, he is pushing 600 hours flying time on it, it is a hoot to fly in.

 

 Lloyd 

 

 --

- The Matronics Kitfox-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kitfox-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Kitfox-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum