Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Icon 210 wiring

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

barber_seville(at)msn.com
Guest

Posted: Sat May 25, 2013 6:18 pm Post subject: Icon 210 wiring

Hello, 

I am a complete beginner in electronics but having Internet access and your book I have come to the conclusion that I have wired the moles connector on my Icom 210 incorrectly because I did not use shielded wire for the connections with a circle around the conductor to ground. Can you confirm that I need to retire the moles using shielded wiring



Sent from my iPad,Chuck

“A nation can survive its fools, and even the ambitious. But it cannot survive treason from within. An enemy at the gates is less formidable, for he is known and carries his banner openly. But the traitor moves amongst those within the gate freely, his sly whispers rustling through all the alleys, heard in the very halls of government itself. 



MT Cicero

 [quote][b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

nuckolls.bob(at)aeroelect
Guest

Posted: Sat May 25, 2013 7:45 pm Post subject: Icon 210 wiring

At 09:15 PM 5/25/2013, you wrote:

 	  Quote: 	
		  Hello,

I am a complete beginner in electronics but having Internet access 

and your book I have come to the conclusion that I have wired the 

moles connector on my Icom 210 incorrectly because I did not use 

shielded wire for the connections with a circle around the conductor 

to ground. Can you confirm that I need to retire the moles using 

shielded wiring\


	


   It's probably not serious. However, SOME of

   the wires may show shield connections at BOTH

   ends . . . in which case you need to add a wire

   to take care of the signals that flowed on the

   shields.



   It's a rare installation that suffers because

   the wires are not shielded.





   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

barber_seville(at)msn.com
Guest

Posted: Sun May 26, 2013 3:32 am Post subject: Icon 210 wiring

Thanks Bob,

Chuck





On May 25, 2013, at 11:42 PM, "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)> wrote:

[quote]--> AeroElectric-List message posted by: "Robert L. Nuckolls, III" <nuckolls.bob(at)aeroelectric.com (nuckolls.bob(at)aeroelectric.com)>



At 09:15 PM 5/25/2013, you wrote:

 	  Quote: 	
		  Hello,

I am a complete beginner in electronics but having Internet access and your book I have come to the conclusion that I have wired the moles connector on my Icom 210 incorrectly because I did not use shielded wire for the connections with a circle around the conductor to ground. Can you confirm that I need to retire the moles using shielded wiring\

	


  It's probably not serious. However, SOME of

  the wires may show shield connections at BOTH

  ends . . . in which case you need to add a wire

  to take care of the signals that flowed on the

  shields.



  It's a rare installation that suffers because

  the wires are not shielded.





  Bob=================================================ref="http://www.matronics.com/Navigator?AeroElectric-List">http://www.matr==========================;          - MATRONICS WEBref="http://forums.matronics.com">http://forums.matronics.comhttp://www.matronics.com/contribution



[b]

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum