Matronics Email Lists :: View topic - Hartzell Governor with C2YR Prop

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Hartzell Governor with C2YR Prop

Matronics Email Lists Forum Index -> RV10-List

View previous topic :: View next topic

Author Message

karolamy(at)roadrunner.co
Guest

Posted: Wed May 29, 2013 10:05 pm Post subject: Hartzell Governor with C2YR Prop

 	  Quote: 	
		   

 Does anyone FLYING have the Hartzell Governor - Vans number:  PROP GOV HZ IO-540?  If so, any issues?  Set up, oil leaks, RPM hunting, or just any performance or regrets for not getting the MT or some other governor?  Having trouble understanding why if we bought a Hartzell Prop from Vans that we would not use a Hartzell Governor.  In the FWF kit they automatically ship the MT:   P-860-3.  I called MT and they said it would work just fine and they would be happy to walk me through the set up procedures if needed.  So I would appreciate some active feedback from some FLYING 10's with this Hartzell Governor.  I believe in my 6 that we used a Woodward (sp?) Governor.  Over 1000 hours and many years, absolutely no problems.

   Thanks much,
	




Rich Hansen

RV-6A sold

10-FWF

 	  Quote:

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Thu May 30, 2013 1:49 am Post subject: Hartzell Governor with C2YR Prop

I have a Hartzell governor, but am a few weeks from flying.



Sent from my iPad



On May 30, 2013, at 2:04 AM, Karol Hansen <karolamy(at)roadrunner.com> wrote:



 	  Quote: 	
		   

 

 

> 

> Does anyone FLYING have the Hartzell Governor - Vans number:  PROP GOV HZ IO-540?  If so, any issues?  Set up, oil leaks, RPM hunting, or just any performance or regrets for not getting the MT or some other governor?  Having trouble understanding why if we bought a Hartzell Prop from Vans that we would not use a Hartzell Governor.  In the FWF kit they automatically ship the MT:   P-860-3.  I called MT and they said it would work just fine and they would be happy to walk me through the set up procedures if needed.  So I would appreciate some active feedback from some FLYING 10's with this Hartzell Governor.  I believe in my 6 that we used a Woodward (sp?) Governor.  Over 1000 hours and many years, absolutely no problems.

   Thanks much,

 

 Rich Hansen

 RV-6A sold

 10-FWF

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

flysrv10(at)gmail.com
Guest

Posted: Thu May 30, 2013 3:40 am Post subject: Hartzell Governor with C2YR Prop

I have 700 hr+ on my mt gov without any issues. There is a simple initial setup for the lever position and limits.  that is it. 



I am not sure why van supplies mt instead of Hartzel but I suspect that with all things Van, value is the factor. 



Do not archive. 



Rob Kermanj 

Sent from my iPad



On May 30, 2013, at 2:04 AM, Karol Hansen <karolamy(at)roadrunner.com> wrote:



 	  Quote: 	
		   

 

 

> 

> Does anyone FLYING have the Hartzell Governor - Vans number:  PROP GOV HZ IO-540?  If so, any issues?  Set up, oil leaks, RPM hunting, or just any performance or regrets for not getting the MT or some other governor?  Having trouble understanding why if we bought a Hartzell Prop from Vans that we would not use a Hartzell Governor.  In the FWF kit they automatically ship the MT:   P-860-3.  I called MT and they said it would work just fine and they would be happy to walk me through the set up procedures if needed.  So I would appreciate some active feedback from some FLYING 10's with this Hartzell Governor.  I believe in my 6 that we used a Woodward (sp?) Governor.  Over 1000 hours and many years, absolutely no problems.

   Thanks much,

 

 Rich Hansen

 RV-6A sold

 10-FWF

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Thu May 30, 2013 4:14 am Post subject: Hartzell Governor with C2YR Prop

Vans randomly supplies both.  My Hartzell governor came in the FWF kit.  I don't know the logic they use to determine which vendor they ship. 



If you do get a Hartzell, you'll need to replace the arm. Which Van doesn't include and costs another $27. 



Bob

Sent from my iPhone



On May 30, 2013, at 7:47 AM, Rob Kermanj <flysrv10(at)gmail.com> wrote:






I am not sure why van supplies mt instead of Hartzel but I suspect that with all things Van, value is the factor. 



Do not archive. 



Rob Kermanj 

Sent from my iPad

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

rene(at)felker.com
Guest

Posted: Thu May 30, 2013 5:06 am Post subject: Hartzell Governor with C2YR Prop

"a few weeks from flying"  that sounds promising.    Enjoy 



Rene' Felker

N423CF

801-721-6080



--

Bob Turner

Joined: 03 Jan 2009
Posts: 885
Location: Castro Valley, CA

Posted: Thu May 30, 2013 7:23 am Post subject: Re: Hartzell Governor with C2YR Prop

I have 120+ hours on stock Vans YIO-540, 2 blade Hartzell, and Hartzell governor from Vans. No problems. I asked Vans for this governor, as I recall I think it was the same price as the MT.



You do NOT need a new arm. You do need to re-orient the arm, easily done. Hartzell gave instructions after an email request.

Mine was set for 2650 rpm out of the box. I left it there.



My hangar neighbor also has a -10 with the same Hartzell set up, a few fewer hours. No issues for him, either.

_________________
Bob Turner
RV-10 QB

bill.peyton

Joined: 19 Sep 2010
Posts: 198
Location: St. Louis, MO

Posted: Wed Jun 12, 2013 9:23 am Post subject: Re: Hartzell Governor with C2YR Prop

I have the Hartzell governor.  You have to replace the arm if you are using the throttle quadrant.  If you do not, you will get about half the travel on the quadrant, and half the leverage.  Yes, it will work with the stock arm, but it looks unprofessional when used in conjunction with the quadrant. 

I have not had any issues after 150 hours.

_________________
Bill
WA0SYV
Aviation Partners, LLC

Leeverett

Joined: 07 Jan 2013
Posts: 14

Posted: Wed Jun 12, 2013 2:34 pm Post subject: Hartzell Governor with C2YR Prop

Bill

 Where did you get the Hartzell governor replacement arm? I am using the standard one from Hartzell with the throttle quadrand and it works well but you are right. It only has half the travel on the quadrant. Leon

 

 > Subject: Re: Hartzell Governor with C2YR Prop

 	  Quote: 	
		   From: peyton.b(at)sbcglobal.net

 Date: Wed, 12 Jun 2013 10:23:08 -0700

 To: rv10-list(at)matronics.com

 

 --> RV10-List message posted by: "bill.peyton" <peyton.b(at)sbcglobal.net>

 

 I have the Hartzell governor. You have to replace the arm if you are using the throttle quadrant. If you do not, you will get about half the travel on the quadrant, and half the leverage. Yes, it will work with the stock arm, but it looks unprofessional when used in conjunction with the quadrant. 

 I have not had any issues after 150 hours.

 

 --------

 Bill 

 WA0SYV

 Aviation Partners, LLC

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=402561#402561

 

 

&gt
	


 	  Quote: 	
		   

 

 


	


 		 	   		  

  [quote][b]

bill.peyton

Joined: 19 Sep 2010
Posts: 198
Location: St. Louis, MO

Posted: Wed Jun 12, 2013 5:22 pm Post subject: Re: Hartzell Governor with C2YR Prop

I called Hartzell, and $27 later I had the part.

image.jpg

Description:

Filesize:

651.44 KB

Viewed:

5757 Time(s)

_________________
Bill
WA0SYV
Aviation Partners, LLC

rleffler

Joined: 05 Nov 2006
Posts: 680

Posted: Wed Jun 12, 2013 5:43 pm Post subject: Hartzell Governor with C2YR Prop

Hartzell part number 103568



--

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler

Display posts from previous:

	Matronics Email Lists Forum Index -> RV10-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum