Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Yak 52 brake valve replacement

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List
View previous topic :: View next topic  
Author Message
mikecavanagh1(at)hotmail.
Guest





PostPosted: Mon Aug 19, 2013 8:50 am    Post subject: Yak 52 brake valve replacement Reply with quote

I am looking for a replacement brake valve for my Yak 52. (the green one below the front seat on the right) Does anyone know of a source? The problem appears to be wear in the brake valve cylinders themselves. There is not pitting or scratches, but there are polished areas of wear. Cleaning, lubing, and re-pressurizing and testing the unit reveals no improvement.
Thanks, Mike Cavanagh


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
dsavarese0812(at)bellsout
Guest





PostPosted: Mon Aug 19, 2013 9:27 am    Post subject: Yak 52 brake valve replacement Reply with quote

Doug Sapp, our CJ6 parts guru has overhaul kits. The assembly you are
talking about is the brake differential valve. The unit in the CJ is
identical to the one in the 52.
Dennis

A. Dennis Savarese
334-285-6263
334-546-8182 (mobile)
www.yak-52.com
Skype - Yakguy1

On 8/19/2013 11:47 AM, Michael B. Cavanagh wrote:
Quote:


I am looking for a replacement brake valve for my Yak 52. (the green one below the front seat on the right) Does anyone know of a source? The problem appears to be wear in the brake valve cylinders themselves. There is not pitting or scratches, but there are polished areas of wear. Cleaning, lubing, and re-pressurizing and testing the unit reveals no improvement.
Thanks, Mike Cavanagh






- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
mikecavanagh1(at)hotmail.
Guest





PostPosted: Tue Aug 20, 2013 6:03 am    Post subject: Yak 52 brake valve replacement Reply with quote

Thanks Dennis!  I ordered the overhaul kit from Doug.  On another subject. I have been looking for replacement landing gear bolts and bushings.  Included are pics.  I would like to replace them all.  I 'd need to go count again, but between the main gear and nose there are about 6 or seven I think.  Thanks, Mike [img]cid:inlineImage1[/img]
 
 [img]cid:inlineImage0[/img]
 
Quote:
Date: Mon, 19 Aug 2013 12:25:33 -0500
From: dsavarese0812(at)bellsouth.net
To: yak-list(at)matronics.com
Subject: Re: Yak-List: Yak 52 brake valve replacement

--> Yak-List message posted by: "A. Dennis Savarese" <dsavarese0812(at)bellsouth.net>

Doug Sapp, our CJ6 parts guru has overhaul kits. The assembly you are
talking about is the brake differential valve. The unit in the CJ is
identical to the one in the 52.
Dennis

A. Dennis Savarese
334-285-6263
334-546-8182 (mobile)
www.yak-52.com
Skype - Yakguy1

On 8/19/2013 11:47 AM, Michael B. Cavanagh wrote:
> --> Yak-List message posted by: "Michael B. Cavanagh" <mikecavanagh1(at)hotmail.com>
>
> I am looking for a replacement brake valve for my Yak 52. (the green one below the front seat on the right) Does anyone know of a source? The problem appears to be wear in the brake valve cylinders themselves. There is not pitting or scratches, but there are polished areas of wear. Cleaning, lubing, and re-pressurizing and testing the unit reveals no improvement.
>
>
> Thanks, Mike Cavanagh
>
>
>
>
>
=





- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List



IMG_1502.JPG
 Description:
 Filesize:  447.17 KB
 Viewed:  3134 Time(s)

IMG_1502.JPG



IMG_1503.JPG
 Description:
 Filesize:  420.51 KB
 Viewed:  3134 Time(s)

IMG_1503.JPG


Back to top
dsavarese0812(at)bellsout
Guest





PostPosted: Tue Aug 20, 2013 6:19 am    Post subject: Yak 52 brake valve replacement Reply with quote

Jill definitely has the bushings at M14P. I've bought them from her
before. You may not need the bolts since the bolts actually fit inside
the bushings when assembled. Many of the bushing are bronze. So they
will wear long before the bolt wears. Just make sure the hole in the
linkage where the bushing inserts is not worn to the point where the
bushing does not fit snugly into the hole.
Dennis

A. Dennis Savarese
334-285-6263
334-546-8182 (mobile)
www.yak-52.com
Skype - Yakguy1

On 8/20/2013 8:59 AM, Mike Cavanagh wrote:
Quote:
Thanks Dennis! I ordered the overhaul kit from Doug. On another
subject. I have been looking for replacement landing gear bolts and
bushings. Included are pics. I would like to replace them all. I 'd
need to go count again, but between the main gear and nose there are
about 6 or seven I think. Thanks, Mike
> Date: Mon, 19 Aug 2013 12:25:33 -0500
> From: dsavarese0812(at)bellsouth.net
> To: yak-list(at)matronics.com
> Subject: Re: Yak 52 brake valve replacement
>
>
<dsavarese0812(at)bellsouth.net>
>
> Doug Sapp, our CJ6 parts guru has overhaul kits. The assembly you are
> talking about is the brake differential valve. The unit in the CJ is
> identical to the one in the 52.
> Dennis
>
> A. Dennis Savarese
> 334-285-6263
> 334-546-8182 (mobile)
> www.yak-52.com
> Skype - Yakguy1
>
> On 8/19/2013 11:47 AM, Michael B. Cavanagh wrote:
> >
<mikecavanagh1(at)hotmail.com>
> >
> > I am looking for a replacement brake valve for my Yak 52. (the
green one below the front seat on the right) Does anyone know of a
source? The problem appears to be wear in the brake valve cylinders
themselves. There is not pitting or scratches, but there are polished
areas of wear. Cleaning, lubing, and re-pressurizing and testing the
unit reveals no improvement.
> >
> >
> > Thanks, Mike Cavanagh
> >
> >
> >
> >
> >
> =
>
>
>


- The Matronics Yak-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Yak-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Yak-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group