Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Kolb-List Digest:

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
bgreen(at)bimi.org
Guest





PostPosted: Sun Sep 08, 2013 6:18 pm    Post subject: Kolb-List Digest: Reply with quote

Hello Kolbers:
Can anyone tell me the required inside width and length of a trailer in which to haul a MKIIIX with the wings attached and in the folded position?
Thank you all for any and all information and suggestions.
Bob
MKIIIX with GPAS VW
N830PB


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
Mike Welch



Joined: 13 Feb 2011
Posts: 272

PostPosted: Sun Sep 08, 2013 6:23 pm    Post subject: Kolb-List Digest: Reply with quote

Bob,

You're going to need at least 24' long and probably every inch of 7' 6" wide, inside measurements.

Mike


On Sep 8, 2013, at 9:20 PM, "Bob Green" <bgreen(at)bimi.org> wrote:

Quote:


Hello Kolbers:
Can anyone tell me the required inside width and length of a trailer in which to haul a MKIIIX with the wings attached and in the folded position?
Thank you all for any and all information and suggestions.
Bob
MKIIIX with GPAS VW
N830PB






- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
rowedenny



Joined: 09 Mar 2008
Posts: 338
Location: Western PA

PostPosted: Mon Sep 09, 2013 3:41 am    Post subject: Kolb-List Digest: Reply with quote

Don't forget height, with a two blade prop a little over 7' should do it, if you have three blades you'll need close to 8'.

Dennis "Skid" Rowe
Mk3, 690L-70, Leechburg, PA

On Sep 8, 2013, at 10:23 PM, Mike Welch <mdnanwelch7(at)hotmail.com> wrote:

Quote:


Bob,

You're going to need at least 24' long and probably every inch of 7' 6" wide, inside measurements.

Mike




On Sep 8, 2013, at 9:20 PM, "Bob Green" <bgreen(at)bimi.org> wrote:

>
>
> Hello Kolbers:
> Can anyone tell me the required inside width and length of a trailer in which to haul a MKIIIX with the wings attached and in the folded position?
> Thank you all for any and all information and suggestions.
> Bob
> MKIIIX with GPAS VW
> N830PB
>
>
>
>







- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message Send e-mail
zeprep251(at)aol.com
Guest





PostPosted: Mon Sep 09, 2013 6:02 am    Post subject: Kolb-List Digest: Reply with quote

Bob
My call hauler trailer,a 24ft unit,modified by raising the roof 1 foot and v nosing the front,an extra 30 inches approx, has 82 in. between the wheel wells.my MK3C wheels with the special nuts for wheel pants fit between the wells.I have the spring steel gear legs,pretty low to the ground.If the tall tubular legs are the same width you'd be OK.I have close to 2ft extra length loaded.The kicker is the inside door height when you are loading.I have hauled a MK3C /912 3blade with the tall new tubular gear legs and it was close to the blade tips.I use a boom cradle on casters which also makes the engine higher when coming up the ramp,but it travels in the cradle and the cradle gives some leading edge clearance when loading.
G.Aman MK3C Jabiru 2200 840hrs sensenich 2blade over 15,000 trailered miles




--


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group