Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Switch S700 2-11

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

Mike M

Joined: 23 May 2009
Posts: 6
Location: Los Lunas, NM

Posted: Fri Nov 15, 2013 8:42 am Post subject: Switch S700 2-11

Bob,



I am looking for a switch that has three potions (Off/On/On).  B&C has a switch S700 2-11 which is shown as On/On/Off but does not have a diagram which shows how this switch is wired.  Can you provide a schematic of this switch?



Mike Marker

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Mike Marker

nuckolls.bob(at)aeroelect
Guest

Posted: Fri Nov 15, 2013 12:43 pm Post subject: Switch S700 2-11

At 10:42 AM 11/15/2013, you wrote:

 	  Quote: 	
		  



Bob,



I am looking for a switch that has three potions (Off/On/On).  B&C 

has a switch S700 2-11 which is shown as On/On/Off but does not have 

a diagram which shows how this switch is wired.  Can you provide a 

schematic of this switch?


	


  What are you trying to do? You can wire an on-on-on

  to be off/on/on by simply leaving one terminal

  unused.



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Mike M

Joined: 23 May 2009
Posts: 6
Location: Los Lunas, NM

Posted: Fri Nov 15, 2013 1:08 pm Post subject: Re: Switch S700 2-11

Bob,



I want to wire my electronic ignition switch such that to can select the Main or Aux battery bus (Off/Aux Bus/Main Bus).  The drawing depicts what I'm thinking.  I'm not sure that the S700 2-11 is internally wired as depicted...that is why I asked for clarification on the switch configuration.



I also want to use this switch for a pulsed landing light (Off/On Steady/Pulsed)



Mike Marker

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Ign Sw.JPG

Description:

Filesize:

26.71 KB

Viewed:

5480 Time(s)

_________________
Mike Marker

nuckolls.bob(at)aeroelect
Guest

Posted: Fri Nov 15, 2013 8:03 pm Post subject: Switch S700 2-11

At 03:08 PM 11/15/2013, you wrote:

  	  Quote: 	
		  --> AeroElectric-List message posted by: "Mike M" <mjwings(at)msn.com>



 Bob,



 I want to wire my electronic ignition switch such that to can select the Main or Aux battery bus (Off/Aux Bus/Main Bus).  The drawing depicts what I'm thinking.  I'm not sure that the S700 2-11 is internally wired as depicted...that is why I asked for clarification on the switch configuration.



 I also want to use this switch for a pulsed landing light (Off/On Steady/Pulsed) 	




   The S700-2-10 switch can be wired for single

   pole three postion as shown below . . . just leave

   the lower throw terminal (3)unhooked and you

   get the desired behavior.

 [img]cid:7.1.0.9.0.20131115220031.02131cb0(at)aeroelectric.com.0[/img] 



 



 

   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

235eee.jpg

Description:

Filesize:

33.87 KB

Viewed:

5466 Time(s)

Mike M

Joined: 23 May 2009
Posts: 6
Location: Los Lunas, NM

Posted: Sat Nov 16, 2013 7:37 am Post subject: Re: Switch S700 2-11

Thanks Bob!  I made several failed attempts to figure out how to wire the S700 2-10 switch to perform desired function...but you drawing makes it obvious.  So I'll be using the 2-10.



Mike Marker

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

_________________
Mike Marker

nuckolls.bob(at)aeroelect
Guest

Posted: Sat Nov 16, 2013 7:53 am Post subject: Switch S700 2-11

At 09:37 AM 11/16/2013, you wrote:

 	  Quote: 	
		  



Thanks Bob!  I made several failed attempts to figure out how to 

wire the S700 2-10 switch to perform desired function...but you 

drawing makes it obvious.  So I'll be using the 2-10.


	


   The 2-11 nomenclature is not carried over from

   the mil-specs like the other dash numbers. I think

   B&C added this callout to describe one of the

   variants of the 2-10 . . . which are fundamentally

   unnecessary since the 2-10 can be wired to accomplish

   the same tasks.



   Bob . . .

- The Matronics AeroElectric-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?AeroElectric-List

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum