 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
djaflyact
Joined: 14 Oct 2013
Posts: 27
|
 Posted: Thu Dec 26, 2013 8:45 pm Post subject: Mod 78 Christmas Miracle |
 |
|
It seems that there is a Santa Claus! My airplane is back together after about 3 months of mod 78 work. I have attached a picture. I have a three day trip tomorrow, so the first flight should be on Monday.
The aileron quick connects seem to be clear of everything. The CS08 brackets clear everything. I am not sure if the flush screws were definitely needed, but the extra margin helps. It certainly helps in installing the wings. I was able to get them on the airplane by myself, which is a good sign.
The angles all seem correct, as far as I can tell. Just a few more parts left (wheel fairing) and that will make the test flight possible. I ran the engine today and it ran perfectly.
I'm planning a simple flight test. Maneuvers, stalls and a wind-up turn to at least 3 Gs. After that, pull the wings once again and inspect.
I also need to reprogram the airspeed limitations in the Dynon Skyview. Does anyone know what they are? Vmo is 127 knotrs, I think. Anyone know what maneuvering speed is? Top of the yellow?
Our long national nightmare i almost over!
Dave
A227
Mini U2
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
| Airplane finally ready to fly after 3 months of mod 78 |
|
| Filesize: |
31.24 KB |
| Viewed: |
1914 Time(s) |
|
| Description: |
| Engine run pre flight - everything perfect |
|
| Filesize: |
131.41 KB |
| Viewed: |
1914 Time(s) |
|
|
|
| Back to top |
|
 |
alan.twigg775(at)gmail.co
Guest
|
| Posted: Fri Dec 27, 2013 9:41 am Post subject: Mod 78 Christmas Miracle |
|
|
Dave, Did you use NAS 517-2-9 screws for CS08, if so I will take your earlier advice and order -8,-9 and -10.
This blow by blow of yours is great, it needs putting together in a 'how to' to supplement Mod 78.
I also bought a remote camera, as well as being helpful it showed me how much I need to clean up before I fly.
Alan Twigg
Kit 463
On Fri, Dec 27, 2013 at 4:45 AM, djaflyact <djaflyact(at)gmail.com (djaflyact(at)gmail.com)> wrote:
[quote] --> Europa-List message posted by: "djaflyact" <djaflyact(at)gmail.com (djaflyact(at)gmail.com)>
It seems that there is a Santa Claus! My airplane is back together after about 3 months of mod 78 work. I have attached a picture. I have a three day trip tomorrow, so the first flight should be on Monday.
The aileron quick connects seem to be clear of everything. The CS08 brackets clear everything. I am not sure if the flush screws were definitely needed, but the extra margin helps. It certainly helps in installing the wings. I was able to get them on the airplane by myself, which is a good sign.
The angles all seem correct, as far as I can tell. Just a few more parts left (wheel fairing) and that will make the test flight possible. I ran the engine today and it ran perfectly.
I'm planning a simple flight test. Maneuvers, stalls and a wind-up turn to at least 3 Gs. After that, pull the wings once again and inspect.
I also need to reprogram the airspeed limitations in the Dynon Skyview. Does anyone know what they are? Vmo is 127 knotrs, I think. Anyone know what maneuvering speed is? Top of the yellow?
Our long national nightmare i almost over!
Dave
A227
Mini U2
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=416237#416237
Attachments:
http://forums.matronics.com//files/pre_flight_142.jpg
http://forums.matronics.com//files/engine_run_pre_flight_203.jpg
===========
="_blank">www.aeroelectric.com
ooks.com" target="_blank">www.buildersbooks.com
et="_blank">www.homebuilthelp.com
et="_blank">www.mypilotstore.com
"_blank">www.mrrace.com
="_blank">http://www.matronics.com/contribution
le, List Admin.
===========
target="_blank">http://www.matronics.com/Navigator?Europa-List
===========
http://forums.matronics.com
===========
[b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
