 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Richard Wheelwright
Joined: 15 Sep 2008
Posts: 111
Location: Halifax, West Yorkshire, UK
|
 Posted: Sun Feb 16, 2014 11:27 am Post subject: Oil Thermostat |
 |
|
Oil Thermostat
I'm considering fitting the Oil thermostat supplyed by Conair in the UK (Approved LAA Mod) My Question is. After removing my cowl and considering the best location to mount the thermostat, Does anyone have any pictures of a suggested location. As the thermostat is quite large with the hose connections fitted to it.
Thank you in advance
Richard Wheelwright
G-IRPW
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
 |
fireflier
Joined: 24 Jun 2012
Posts: 58
|
| Posted: Sun Feb 16, 2014 11:58 am Post subject: Oil Thermostat |
|
|
Hi Richard
I have recently fitted the oil thermostat as part if my build. I have mounted mine on the starboard footwell as per the photo. Im not sure if this picture is off the thermostat in its final position as I had to move it up from its first location, so that it didn't kink the oil hose going to the oil cooler.
I will be going to the aircraft shortly to do some other bits, so can take more photos for you if you want?
Kind regards
Donald
On 16 Feb 2014, at 19:27, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk> wrote:
| Quote: |
Oil Thermostat
I'm considering fitting the Oil thermostat supplyed by Conair in the UK (Approved LAA Mod) My Question is. After removing my cowl and considering the best location to mount the thermostat, Does anyone have any pictures of a suggested location. As the thermostat is quite large with the hose connections fitted to it.
Thank you in advance
Richard Wheelwright
G-IRPW
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=418802#418802
====================================
|
====================================
====================================
====================================
<pre><b><font size=2 color="#000000" face="courier new,courier">
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
| Filesize: |
100.83 KB |
| Viewed: |
6438 Time(s) |
|
_________________
Fireflier |
|
| Back to top |
|
|
aircraftspecialty(at)gmai
Guest
|
| Posted: Sun Feb 16, 2014 12:11 pm Post subject: Oil Thermostat |
|
|
We are just about to release a thermostasis install kit for the Rotax 912 engine. We include the thermostasis unit, an fittings for it and the 4 required hoses.
The cost is going to be $680usd for the complete package
If anyone would like more information, please email me at steve(at)aircraftspecialty.com
Have a nice weekend
Steve
Sent from my iPhone
| Quote: | On Feb 16, 2014, at 13:27, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk> wrote:
Oil Thermostat
I'm considering fitting the Oil thermostat supplyed by Conair in the UK (Approved LAA Mod) My Question is. After removing my cowl and considering the best location to mount the thermostat, Does anyone have any pictures of a suggested location. As the thermostat is quite large with the hose connections fitted to it.
Thank you in advance
Richard Wheelwright
G-IRPW
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=418802#418802
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
Richard Wheelwright
Joined: 15 Sep 2008
Posts: 111
Location: Halifax, West Yorkshire, UK
|
| Posted: Sun Feb 16, 2014 12:44 pm Post subject: Re: Oil Thermostat |
|
|
Donald,
That looks like a good position. I can see that you may have had to re-fit the Stat higher as joining to the cooler would ba a problem. I would be interested in some more pictures of your final installationn to the cooler without kinking the pipes and allowing slow bends.
Regards
Richard Wheelwright
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
Richard Wheelwright
G-IRPW
First Flight 24th July 2013 |
|
| Back to top |
|
|
fireflier
Joined: 24 Jun 2012
Posts: 58
|
| Posted: Sun Feb 16, 2014 1:02 pm Post subject: Oil Thermostat |
|
|
Hi Richard
It seemed the best location to me at the time off installation.
I had also considered putting it on the side of the starboard footwell, however as I have incorporated the cabin heater mod my cabin air inlet is on the side so space is limited.
I'm at the aircraft at the moment so will drop the from lower cowl before i finish tonight and take a few more photos for you.
Kind regards
Donald
Sent from my iPhone
On 16 Feb 2014, at 20:44, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk> wrote:
| Quote: |
Donald,
That looks like a good position. I can see that you may have had to re-fit the Stat higher as joining to the cooler would ba a problem. I would be interested in some more pictures of your final installationn to the cooler without kinking the pipes and allowing slow bends.
Regards
Richard Wheelwright
--------
Richard Wheelwright
G-IRPW
First Flight 24th July 2013
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=418812#418812
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
Fireflier |
|
| Back to top |
|
|
Richard Wheelwright
Joined: 15 Sep 2008
Posts: 111
Location: Halifax, West Yorkshire, UK
|
| Posted: Sun Feb 16, 2014 1:24 pm Post subject: Oil Thermostat |
|
|
Donald,
Thank you.
====================
Richard Wheelwright
====================
On Sunday, 16 February 2014, 21:11, Donald Cameron <fireflier(at)btinternet.com> wrote:
--> Europa-List message posted by: Donald Cameron <fireflier(at)btinternet.com (fireflier(at)btinternet.com)>
Hi Richard
It seemed the best location to me at the time off installation.
I had also considered putting it on the side of the starboard footwell, however as I have incorporated the cabin heater mod my cabin air inlet is on the side so space is limited.
I'm at the aircraft at the moment so will drop the from lower cowl before i finish tonight and take a few more photos for you.
Kind regards
Donald
Sent from my iPhone
On 16 Feb 2014, at 20:44, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)> wrote:
[quote] --> Europa-List message posted by: "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)>
Donald,
That looks like a good position. I can see that you may have had to re-fit the Stat higher as joining to the cooler would ba a problem. I would be interested in some more pictures of your final installationn to the cooler without kinking the pipes and allowing slow bends.
Regards
Richard Wheelwright
--------
Richard Wheelwright
G-IRPW
First Flight 24th July 2013
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=418812#418812
matronics.com/Navigator?Europa-List" target="_blank">http://www.matronics= -->
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
Richard Wheelwright
G-IRPW
First Flight 24th July 2013 |
|
| Back to top |
|
|
fireflier
Joined: 24 Jun 2012
Posts: 58
|
| Posted: Sun Feb 16, 2014 1:47 pm Post subject: Oil Thermostat |
|
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
Fireflier |
|
| Back to top |
|
|
fireflier
Joined: 24 Jun 2012
Posts: 58
|
| Posted: Sun Feb 16, 2014 1:53 pm Post subject: Oil Thermostat |
|
|
Hi Richard
Photos emailed to you email account as it appears my reply is too big an attachment to show on the forum.
Kind regards
Donald
Sent from my iPhone
On 16 Feb 2014, at 21:23, Richard Wheelwright <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)> wrote:
[quote]Donald,
Thank you.
====================
Richard Wheelwright
====================
On Sunday, 16 February 2014, 21:11, Donald Cameron <fireflier(at)btinternet.com (fireflier(at)btinternet.com)> wrote:
--> Europa-List message posted by: Donald Cameron <fireflier(at)btinternet.com (fireflier(at)btinternet.com)>
Hi Richard
It seemed the best location to me at the time off installation.
I had also considered putting it on the side of the starboard footwell, however as I have incorporated the cabin heater mod my cabin air inlet is on the side so space is limited.
I'm at the aircraft at the moment so will drop the from lower cowl before i finish tonight and take a few more photos for you.
Kind regards
Donald
Sent from my iPhone
On 16 Feb 2014, at 20:44, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)> wrote:
| Quote: |
===================================
courier new,courier">http://www.matronics.com/Navigator?Europa-List
===================================
cs.com
===================================
matronics.com/contribution
===================================
|
[b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
Fireflier |
|
| Back to top |
|
|
Richard Wheelwright
Joined: 15 Sep 2008
Posts: 111
Location: Halifax, West Yorkshire, UK
|
| Posted: Sun Feb 16, 2014 2:09 pm Post subject: Oil Thermostat |
|
|
Donald,
The Photos are great, and just what I wanted, This helps a lot, Is it possible for you to take a picture down the back of the engine to where the pipes go to the Cooler?
====================
Richard Wheelwright
====================
On Sunday, 16 February 2014, 22:02, Donald Cameron <fireflier(at)btinternet.com> wrote:
Hi Richard
Photos emailed to you email account as it appears my reply is too big an attachment to show on the forum.
Kind regards
DonaldSent from my iPhone
On 16 Feb 2014, at 21:23, Richard Wheelwright <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)> wrote:
[quote]Donald,
Thank you.
====================
Richard Wheelwright====================
On Sunday, 16 February 2014, 21:11, Donald Cameron <fireflier(at)btinternet.com (fireflier(at)btinternet.com)> wrote:
--> Europa-List message posted by: Donald Cameron <fireflier(at)btinternet.com (fireflier(at)btinternet.com)>Hi Richard It seemed the best location to me at the time off installation. I had also considered putting it on the side of the starboard footwell, however as I have incorporated the cabin heater mod my cabin air inlet is on the side so space is limited. I'm at the aircraft at the moment so will drop the from lower cowl before i finish tonight and take a few more photos for you. Kind regardsDonaldSent from my iPhoneOn 16 Feb 2014, at 20:44, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)> wrote:> --> Europa-List message posted by: "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)>> > Donald,> That looks like a good position. I can see that you may have had to re-fit the Stat higher as joining to the cooler would ba a problem. I would be interested in some more pictures of your final installationn to the cooler without kinking the pipes and allowing slow bends.> > Regards> Richard Wheelwright> > --------> Richard Wheelwright> G-IRPW> First Flight 24th July 2013> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.php?p=418812#418812> > > > > matronics.com/Navigator?Europa-List" target="_blank">http://www.matronics= --> [/url]
[url=http://www.matronics.com/contribution]
http://www.matronics.com/Nave="rect" target="_blank" href="http://forums.matronics.com/">http://ff="http://www.matronics.com/contribution">http://www.matronics.com/contri===============
[b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
Richard Wheelwright
G-IRPW
First Flight 24th July 2013 |
|
| Back to top |
|
|
fireflier
Joined: 24 Jun 2012
Posts: 58
|
| Posted: Sun Feb 16, 2014 2:55 pm Post subject: Oil Thermostat |
|
|
Hi Richard
Yes not a problem i will take some photos of the pipes going to the cooler tomorrow. Im sorry never got your reply until I got back home from the plane.
Kind regards
Donald
Sent from my iPhone
On 16 Feb 2014, at 22:09, Richard Wheelwright <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)> wrote:
[quote]Donald,
The Photos are great, and just what I wanted, This helps a lot, Is it possible for you to take a picture down the back of the engine to where the pipes go to the Cooler?
====================
Richard Wheelwright
====================
On Sunday, 16 February 2014, 22:02, Donald Cameron <fireflier(at)btinternet.com (fireflier(at)btinternet.com)> wrote:
Hi Richard
Photos emailed to you email account as it appears my reply is too big an attachment to show on the forum.
Kind regards
DonaldSent from my iPhone
On 16 Feb 2014, at 21:23, Richard Wheelwright <rpwheelwright(at)yahoo.co.uk (rpwheelwright(at)yahoo.co.uk)> wrote:
[b]
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
_________________
Fireflier |
|
| Back to top |
|
|
mau11(at)orange.fr
Guest
|
| Posted: Sun Feb 16, 2014 9:56 pm Post subject: Oil Thermostat |
|
|
Hello, do you have pictures of it?
Many Thanks
Michel AUVRAY
Le 16/02/2014 21:10, Aircraft Specialty a écrit :
| Quote: |
We are just about to release a thermostasis install kit for the Rotax 912 engine. We include the thermostasis unit, an fittings for it and the 4 required hoses.
The cost is going to be $680usd for the complete package
If anyone would like more information, please email me at steve(at)aircraftspecialty.com
Have a nice weekend
Steve
Sent from my iPhone
> On Feb 16, 2014, at 13:27, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk> wrote:
>
>
>
> Oil Thermostat
>
> I'm considering fitting the Oil thermostat supplyed by Conair in the UK (Approved LAA Mod) My Question is. After removing my cowl and considering the best location to mount the thermostat, Does anyone have any pictures of a suggested location. As the thermostat is quite large with the hose connections fitted to it.
>
> Thank you in advance
>
> Richard Wheelwright
> G-IRPW
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=418802#418802
>
>
|
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
|
|
| Back to top |
|
|
aircraftspecialty(at)gmai
Guest
|
| Posted: Sun Feb 16, 2014 10:30 pm Post subject: Oil Thermostat |
|
|
Here are a few pictures of the top of the engine with the mounting location. We will provide thy thermostasis units as well as the 4 required hoses and the 4 AN fittings for the thermostasis unit.
All fittings on the hoses are stainless steel. In addition all hoses are conductive Teflon and are pressure tested and fire sleeved.
We are finalizing details of the install kit now.
Have a great week
Steve
Sent from my iPhone
| Quote: | On Feb 16, 2014, at 22:55, Michel AUVRAY <mau11(at)orange.fr> wrote:
Hello, do you have pictures of it?
Many Thanks
Michel AUVRAY
Le 16/02/2014 21:10, Aircraft Specialty a écrit :
>
>
>
> We are just about to release a thermostasis install kit for the Rotax 912 engine. We include the thermostasis unit, an fittings for it and the 4 required hoses.
>
> The cost is going to be $680usd for the complete package
>
> If anyone would like more information, please email me at steve(at)aircraftspecialty.com
>
>
> Have a nice weekend
> Steve
> Sent from my iPhone
>
>> On Feb 16, 2014, at 13:27, "Richard Wheelwright" <rpwheelwright(at)yahoo.co.uk> wrote:
>>
>>
>>
>> Oil Thermostat
>>
>> I'm considering fitting the Oil thermostat supplyed by Conair in the UK (Approved LAA Mod) My Question is. After removing my cowl and considering the best location to mount the thermostat, Does anyone have any pictures of a suggested location. As the thermostat is quite large with the hose connections fitted to it.
>>
>> Thank you in advance
>>
>> Richard Wheelwright
>> G-IRPW
>>
>>
>>
>>
>> Read this topic online here:
>>
>> http://forums.matronics.com/viewtopic.php?p=418802#418802
====================================
|
====================================
====================================
====================================
<pre><b><font size=2 color="#000000" face="courier new,courier">
| | - The Matronics Europa-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Europa-List |
|
| Description: |
|
| Filesize: |
136 KB |
| Viewed: |
6409 Time(s) |
|
| Description: |
|
| Filesize: |
136 KB |
| Viewed: |
6409 Time(s) |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
