 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
gill.g(at)gpimail.com
Guest
|
 Posted: Thu Apr 10, 2014 2:42 pm Post subject: Main air valve |
 |
|
This valve has 1/8” npt fittings which are the same as the stock Chinese valve, no adaptor is required. I use a different valve for the emergency air which bleeds emergency system and eliminates sticking shuttle valve issues.
Gill
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Dee Conger
Sent: Thursday, March 27, 2014 2:38 PM
To: yak-list
Subject: Re: Main air valve
Hi - don't have that handy, but I used 1/4" valves in all my Yaks - the lines in the yak are 6mm, so easiest way to adapt is to buy swagelok 6mm to 1/4" union adapters, and then splice in a short run of 1/4" tubing. I use these valves on the main and also emergency valves - WAY better than the russian valves and never leak.
On Thu, Mar 27, 2014 at 9:50 AM, rmhou(at)yahoo.com (rmhou(at)yahoo.com) <rmhou(at)yahoo.com (rmhou(at)yahoo.com)> wrote:
Hi Dee,
Can you share the part number of the compatible Swagelok valve?
Thanks,
Robin
Sent from Yahoo Mail on Android
From: Dee Conger <dee(at)innoviveinc.com (dee(at)innoviveinc.com)>;
To: yak-list <yak-list(at)matronics.com (yak-list(at)matronics.com)>;
Subject: Re: Main air valve
Sent: Thu, Mar 27, 2014 4:24:54 AM
Why would you possibly want to install those shitty russian valves? Do yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a very simple retrofit, but a huge improvement.
On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:
--> Yak-List message posted by: Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)>
Kregg: I'll take two if you have them to spare...contact me off list.
Sent from my iPad
| Quote: | On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg(at)balancemyprop.com (kregg(at)balancemyprop.com)> wrote:
--> Yak-List message posted by: Kregg Victory <kregg(at)balancem
|
| Quote: | How many do you need? I have a few.
Kregg Victory
Sent from my iPhone
> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:
>
|
| Quote: | > Folks: looking for a main air valve. Anyone have an idea where one can be found? I've tried Doug and Jill.
>
> Sent from my iPad
|
===========
rget="_blank">http://www.matronics.com/Navigator?Yak-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
012345678901234
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
| Description: |
|
| Filesize: |
23.13 KB |
| Viewed: |
1646 Time(s) |
|
|
|
| Back to top |
|
 |
Dawg
Joined: 19 May 2013
Posts: 355
|
| Posted: Thu Apr 10, 2014 10:56 pm Post subject: Main air valve |
|
|
Can we see pix of these great ideas? Thank you
Sent from my iPad
On Apr 11, 2014, at 7:41, "Gill Gutierrez" <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:
[quote]v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} <![endif]--> <![endif]--> <![endif]-->
This valve has 1/8” npt fittings which are the same as the stock Chinese valve, no adaptor is required. I use a different valve for the emergency air which bleeds emergency system and eliminates sticking shuttle valve issues.
Gill
From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com)] On Behalf Of Dee Conger
Sent: Thursday, March 27, 2014 2:38 PM
To: yak-list
Subject: Re: Main air valve
Hi - don't have that handy, but I used 1/4" valves in all my Yaks - the lines in the yak are 6mm, so easiest way to adapt is to buy swagelok 6mm to 1/4" union adapters, and then splice in a short run of 1/4" tubing. I use these valves on the main and also emergency valves - WAY better than the russian valves and never leak.
On Thu, Mar 27, 2014 at 9:50 AM, rmhou(at)yahoo.com (rmhou(at)yahoo.com) <rmhou(at)yahoo.com (rmhou(at)yahoo.com)> wrote:
Hi Dee,
Can you share the part number of the compatible Swagelok valve?
Thanks,
Robin
Sent from Yahoo Mail on Android
From: Dee Conger <dee(at)innoviveinc.com (dee(at)innoviveinc.com)>;
To: yak-list <yak-list(at)matronics.com (yak-list(at)matronics.com)>;
Subject: Re: Main air valve
Sent: Thu, Mar 27, 2014 4:24:54 AM
Why would you possibly want to install those shitty russian valves? Do yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a very simple retrofit, but a huge improvement.
On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:
--> Yak-List message posted by: Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)>
Kregg: I'll take two if you have them to spare...contact me off list.
Sent from my iPad
| Quote: | On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg(at)balancemyprop.com (kregg(at)balancemyprop.com)> wrote:
--> Yak-List message posted by: Kregg Victory <kregg(at)balancem
|
| Quote: | How many do you need? I have a few.
Kregg Victory
Sent from my iPhone
> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:
>
|
| Quote: | > Folks: looking for a main air valve. Anyone have an idea where one can be found? I've tried Doug and Jill.
>
> Sent from my iPad
|
===========
rget="_blank">http://www.matronics.com/Navigator?Yak-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
012345678901234
<Swagelok Valve.JPG>
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
_________________
Dawg |
|
| Back to top |
|
|
rmhou(at)yahoo.com
Guest
|
| Posted: Fri Apr 11, 2014 11:12 am Post subject: Main air valve |
|
|
Hi Gill and Dee,
Thank you both. I called their L.A. office and the price is only $88 with no min quantity requirement. This is cheaper than the Chinese valve.
Gill, can you provide more information on your emergency valve mod? What is the Swagelok part no. and which shuttle valve did you eliminate?
Thanks in advance.
Robin
From: Gill Gutierrez <gill.g(at)gpimail.com>
To: yak-list(at)matronics.com
Sent: Thursday, April 10, 2014 3:41 PM
Subject: RE: Main air valve
This valve has 1/8” npt fittings which are the same as the stock Chinese valve, no adaptor is required. I use a different valve for the emergency air which bleeds emergency system and eliminates sticking shuttle valve issues.
Gill
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Dee Conger
Sent: Thursday, March 27, 2014 2:38 PM
To: yak-list
Subject: Re: Main air valve
Hi - don't have that handy, but I used 1/4" valves in all my Yaks - the lines in the yak are 6mm, so easiest way to adapt is to buy swagelok 6mm to 1/4" union adapters, and then splice in a short run of 1/4" tubing. I use these valves on the main and also emergency valves - WAY better than the russian valves and never leak.
On Thu, Mar 27, 2014 at 9:50 AM, rmhou(at)yahoo.com (rmhou(at)yahoo.com) <rmhou(at)yahoo.com (rmhou(at)yahoo.com)> wrote:
Hi Dee,
Can you share the part number of the compatible Swagelok valve?
Thanks,
Robin
Sent from Yahoo Mail on Android
From: Dee Conger <dee(at)innoviveinc.com (dee(at)innoviveinc.com)>;
To: yak-list <yak-list(at)matronics.com (yak-list(at)matronics.com)>;
Subject: Re: Yak-List: Main air valve
Sent: Thu, Mar 27, 2014 4:24:54 AM
Why would you possibly want to install those shitty russian valves? Do yourself a favor and retrofit to Swagelok (or similar) 1/4 turn valve - a very simple retrofit, but a huge improvement.
On Wed, Mar 26, 2014 at 9:02 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:
--> Yak-List message posted by: Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)>
Kregg: I'll take two if you have them to spare...contact me off list.
Sent from my iPad
| Quote: | On Mar 26, 2014, at 10:48 PM, Kregg Victory <kregg(at)balancemyprop.com (kregg(at)balancemyprop.com)> wrote:
--> Yak-List message posted by: Kregg Victory <kregg(at)balancem
|
| Quote: | How many do you need? I have a few.
Kregg Victory
Sent from my iPhone
> On Mar 26, 2014, at 8:38 PM, Dave Jester <wdjester(at)cox.net (wdjester(at)cox.net)> wrote:
>
|
| Quote: | > Folks: looking for a main air valve. Anyone have an idea where one can be found? I've tried Doug and Jill.
>
> Sent from my iPad
|
===========
rget="_blank">http://www.matronics.com/Navigator?Yak-List
===========
http://forums.matronics.com
===========
le, List Admin.
="_blank">http://www.matronics.com/contribution
===========
012345678901234
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
