 |
Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
|
| View previous topic :: View next topic |
| Author |
Message |
Ernie
Joined: 11 Jan 2006
Posts: 513
|
 Posted: Sat Jul 05, 2014 9:05 am Post subject: Compass Amplifier Tubes |
 |
|
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
 |
dougsappllc(at)gmail.com
Guest
|
| Posted: Sat Jul 05, 2014 9:40 am Post subject: Compass Amplifier Tubes |
|
|
Ernie,Actually the truth is that it is normally NOT a bad tube. It is normally just dirty or corroded connectors. Use a SS or brass brush to clean the contractors, 90% of the time if fixes the problem.
I know of no tube available here in the US which will replace those in the FL-3. If anyone out there has this information please share it as these tubes are very hard to find. In fact I have not been successful in the last 3 orders to China, I have been able to buy only new and overhauled FL-3s, but no tubes.
Doug
On Sat, Jul 5, 2014 at 10:05 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:
[quote]I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
| Quote: |
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Ernie
Joined: 11 Jan 2006
Posts: 513
|
| Posted: Sat Jul 05, 2014 10:02 am Post subject: Compass Amplifier Tubes |
|
|
I'm working on the tubes now. I was able to find the 6k8, but not the 6x6, but then again, I may have read it wrong. If you know the proper lettering I'll do the research. I know that I did source tubes on my old CJ, and there were American equivalents. Theres nothing much more to go wrong in these amps.
Thanks
On Sat, Jul 5, 2014 at 1:39 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
| Quote: | Ernie,Actually the truth is that it is normally NOT a bad tube. It is normally just dirty or corroded connectors. Use a SS or brass brush to clean the contractors, 90% of the time if fixes the problem.
I know of no tube available here in the US which will replace those in the FL-3. If anyone out there has this information please share it as these tubes are very hard to find. In fact I have not been successful in the last 3 orders to China, I have been able to buy only new and overhauled FL-3s, but no tubes.
Doug
On Sat, Jul 5, 2014 at 10:05 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:
| Quote: | I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
|
| Quote: |
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
|
--
Ernie
Nanchang CJ-6A
N6315T
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Ernie
Joined: 11 Jan 2006
Posts: 513
|
| Posted: Sun Jul 06, 2014 7:34 am Post subject: Compass Amplifier Tubes |
|
|
Re-seating the tubes fixed the problem. I have a source for one of the tubes. I do not believe that the other one is a 6X6, since that tube really doesn't exist. It's either a 6k6 or a 6x?.
If anyone knows about tube nomenclature maybe you can help.
Thanks
On Sat, Jul 5, 2014 at 1:59 PM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:
| Quote: | I'm working on the tubes now. I was able to find the 6k8, but not the 6x6, but then again, I may have read it wrong. If you know the proper lettering I'll do the research. I know that I did source tubes on my old CJ, and there were American equivalents. Theres nothing much more to go wrong in these amps.
Thanks
On Sat, Jul 5, 2014 at 1:39 PM, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
| Quote: | Ernie,Actually the truth is that it is normally NOT a bad tube. It is normally just dirty or corroded connectors. Use a SS or brass brush to clean the contractors, 90% of the time if fixes the problem.
I know of no tube available here in the US which will replace those in the FL-3. If anyone out there has this information please share it as these tubes are very hard to find. In fact I have not been successful in the last 3 orders to China, I have been able to buy only new and overhauled FL-3s, but no tubes.
Doug
On Sat, Jul 5, 2014 at 10:05 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:
| Quote: | I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
|
| Quote: |
et="_blank">http://www.matronics.com/Navigator?Yak-List
tp://forums.matronics.com
_blank">http://www.matronics.com/contribution
|
|
--
Ernie
Nanchang CJ-6A
N6315T
|
--
Ernie
Nanchang CJ-6A
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
gill.g(at)gpimail.com
Guest
|
| Posted: Mon Jul 07, 2014 9:28 am Post subject: Compass Amplifier Tubes |
|
|
RCA 6H6 works
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Saturday, July 05, 2014 10:05 AM
To: yak-list
Subject: Compass Amplifier Tubes
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
| Quote: | | http://www.matronics.com/Navigator?Yak-List |
01234567
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Ernie
Joined: 11 Jan 2006
Posts: 513
|
| Posted: Mon Jul 07, 2014 11:00 am Post subject: Compass Amplifier Tubes |
|
|
Yes the 6H6 works for the 6X6c but trying to figure out what to use for whats labeled 6K8 or 6zh176 (zh is represented by mirror image k's back to back in Cryllic).
On Mon, Jul 7, 2014 at 1:27 PM, Gill Gutierrez <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:
| Quote: |
RCA 6H6 works
From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com)] On Behalf Of Ernest Martinez
Sent: Saturday, July 05, 2014 10:05 AM
To: yak-list
Subject: Compass Amplifier Tubes
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
0 12345 67
8
|
--
Ernie
Nanchang CJ-6A
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
gill.g(at)gpimail.com
Guest
|
| Posted: Mon Jul 07, 2014 12:39 pm Post subject: Compass Amplifier Tubes |
|
|
Tube Depot has 6K8 tubes for <$9
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Monday, July 07, 2014 12:00 PM
To: yak-list
Subject: Re: Compass Amplifier Tubes
Yes the 6H6 works for the 6X6c but trying to figure out what to use for whats labeled 6K8 or 6zh176 (zh is represented by mirror image k's back to back in Cryllic).
On Mon, Jul 7, 2014 at 1:27 PM, Gill Gutierrez <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:
RCA 6H6 works
From: owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com) [mailto:owner-yak-list-server(at)matronics.com (owner-yak-list-server(at)matronics.com)] On Behalf Of Ernest Martinez
Sent: Saturday, July 05, 2014 10:05 AM
To: yak-list
Subject: Compass Amplifier Tubes
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
012
--
Ernie
Nanchang CJ-6A
345678901234567890
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Ernie
Joined: 11 Jan 2006
Posts: 513
|
| Posted: Mon Jul 07, 2014 12:50 pm Post subject: Compass Amplifier Tubes |
|
|
6k8 is the Chinese/russiandesignator, it's not aUS 6k8
On Monday, July 7, 2014, Gill Gutierrez <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:
| Quote: |
Tube Depot has 6K8 tubes for <$9
From: [url=javascript:_e(%7B%7D,'cvml','owner-yak-list-server(at)matronics.com');]owner-yak-list-server(at)matronics.com[/url] [mailto:[url=javascript:_e(%7B%7D,'cvml','owner-yak-list-server(at)matronics.com');]owner-yak-list-server(at)matronics.com[/url]] On Behalf Of Ernest Martinez
Sent: Monday, July 07, 2014 12:00 PM
To: yak-list
Subject: Re: Compass Amplifier Tubes
Yes the 6H6 works for the 6X6c but trying to figure out what to use for whats labeled 6K8 or 6zh176 (zh is represented by mirror image k's back to back in Cryllic).
On Mon, Jul 7, 2014 at 1:27 PM, Gill Gutierrez <[url=javascript:_e(%7B%7D,'cvml','gill.g(at)gpimail.com');]gill.g(at)gpimail.com[/url]> wrote:
RCA 6H6 works
From: [url=javascript:_e(%7B%7D,'cvml','owner-yak-list-server(at)matronics.com');]owner-yak-list-server(at)matronics.com[/url] [mailto:[url=javascript:_e(%7B%7D,'cvml','owner-yak-list-server(at)matronics.com');]owner-yak-list-server(at)matronics.com[/url]] On Behalf Of Ernest Martinez
Sent: Saturday, July 05, 2014 10:05 AM
To: yak-list
Subject: Compass Amplifier Tubes
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
01 2
--
Ernie
Nanchang CJ-6A
3 4567890 123 45678 90
1
|
--
Ernie
Nanchang CJ-6A
[quote][b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Ernie
Joined: 11 Jan 2006
Posts: 513
|
| Posted: Wed Jul 09, 2014 8:39 am Post subject: Compass Amplifier Tubes |
|
|
These are the tubes for the FL-3 Amplifier.
6H6P and 6J8P
They are common, and easily found on Ebay for about $3.00 each.
Ernie
On Mon, Jul 7, 2014 at 4:50 PM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:
[quote]6k8 is the Chinese/russiandesignator, it's not aUS 6k8
On Monday, July 7, 2014, Gill Gutierrez <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:
| Quote: |
Tube Depot has 6K8 tubes for <$9
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Monday, July 07, 2014 12:00 PM
To: yak-list
Subject: Re: Compass Amplifier Tubes
Yes the 6H6 works for the 6X6c but trying to figure out what to use for whats labeled 6K8 or 6zh176 (zh is represented by mirror image k's back to back in Cryllic).
On Mon, Jul 7, 2014 at 1:27 PM, Gill Gutierrez <gill.g(at)gpimail.com> wrote:
RCA 6H6 works
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Saturday, July 05, 2014 10:05 AM
To: yak-list
Subject: Compass Amplifier Tubes
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
01 2
--
Ernie
Nanchang CJ-6A
3 4567890 123 45678 90
1
|
--
Ernie
Nanchang CJ-6A
[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
dougsappllc(at)gmail.com
Guest
|
| Posted: Wed Jul 09, 2014 9:26 am Post subject: Compass Amplifier Tubes |
|
|
Thanks Ernie, now I know where to send customers who are in need of replacement tubes. Previously the only option was to buy a complete new FL-3 unit.
The list works only if we are all willing to share our knowledge.
Thanks again.
Doug
On Wed, Jul 9, 2014 at 9:37 AM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:
[quote]These are the tubes for the FL-3 Amplifier.
6H6P and 6J8P
They are common, and easily found on Ebay for about $3.00 each.
Ernie
On Mon, Jul 7, 2014 at 4:50 PM, Ernest Martinez <erniel29(at)gmail.com (erniel29(at)gmail.com)> wrote:
| Quote: | 6k8 is the Chinese/russiandesignator, it's not aUS 6k8
On Monday, July 7, 2014, Gill Gutierrez <gill.g(at)gpimail.com (gill.g(at)gpimail.com)> wrote:
| Quote: |
Tube Depot has 6K8 tubes for <$9
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Monday, July 07, 2014 12:00 PM
To: yak-list
Subject: Re: Compass Amplifier Tubes
Yes the 6H6 works for the 6X6c but trying to figure out what to use for whats labeled 6K8 or 6zh176 (zh is represented by mirror image k's back to back in Cryllic).
On Mon, Jul 7, 2014 at 1:27 PM, Gill Gutierrez <gill.g(at)gpimail.com> wrote:
RCA 6H6 works
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Saturday, July 05, 2014 10:05 AM
To: yak-list
Subject: Compass Amplifier Tubes
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
01 2
--
Ernie
Nanchang CJ-6A
3 4567890 123 45678 90
1
|
--
Ernie
Nanchang CJ-6A
http://www.matronics.com/Navigator?Yak-List |
2[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
Ernie
Joined: 11 Jan 2006
Posts: 513
|
| Posted: Wed Jul 09, 2014 12:42 pm Post subject: Compass Amplifier Tubes |
|
|
Update
The 6J8P is a Chinese tube, J grade means military. The American equivalent is 6SJ7.
Ernie
On Wednesday, July 9, 2014, doug sapp <dougsappllc(at)gmail.com (dougsappllc(at)gmail.com)> wrote:
[quote]Thanks Ernie, now I know where to send customers who are in need of replacement tubes. Previously the only option was to buy a complete new FL-3 unit.
The list works only if we are all willing to share our knowledge.
Thanks again.
Doug
On Wed, Jul 9, 2014 at 9:37 AM, Ernest Martinez <[url=javascript:_e(%7B%7D,'cvml','erniel29(at)gmail.com');]erniel29(at)gmail.com[/url]> wrote:
| Quote: | These are the tubes for the FL-3 Amplifier.
6H6P and 6J8P
They are common, and easily found on Ebay for about $3.00 each.
Ernie
On Mon, Jul 7, 2014 at 4:50 PM, Ernest Martinez <[url=javascript:_e(%7B%7D,'cvml','erniel29(at)gmail.com');]erniel29(at)gmail.com[/url]> wrote:
| Quote: | 6k8 is the Chinese/russiandesignator, it's not aUS 6k8
On Monday, July 7, 2014, Gill Gutierrez <[url=javascript:_e(%7B%7D,'cvml','gill.g(at)gpimail.com');]gill.g(at)gpimail.com[/url]> wrote:
| Quote: |
Tube Depot has 6K8 tubes for <$9
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Monday, July 07, 2014 12:00 PM
To: yak-list
Subject: Re: Compass Amplifier Tubes
Yes the 6H6 works for the 6X6c but trying to figure out what to use for whats labeled 6K8 or 6zh176 (zh is represented by mirror image k's back to back in Cryllic).
On Mon, Jul 7, 2014 at 1:27 PM, Gill Gutierrez <gill.g(at)gpimail.com> wrote:
RCA 6H6 works
From: owner-yak-list-server(at)matronics.com [mailto:owner-yak-list-server(at)matronics.com] On Behalf Of Ernest Martinez
Sent: Saturday, July 05, 2014 10:05 AM
To: yak-list
Subject: Compass Amplifier Tubes
I've replaced the tubes in the compass amplifier, but I can't remember now what the equivalents were. The tube base says 6x6 and 6k8 but a google search finds nothing easily found for the 6x6. Underneath is it says 6 (2 k's back to back) 6c I'm not sure if that back to back k symbol is meant to be translated as a K.
Any help would be appreciated.
I know I an just buy the whole amp, but I've seen this symptom before where the needle just goes round and round, and tube replacement fixed it.
--
Ernie
Nanchang CJ-6A
01 2
--
Ernie
Nanchang CJ-6A
3 4567890 123 45678 90
1
|
--
Ernie
Nanchang CJ-6A
http://www.matronics.com/Navigator?Yak-List |
2http://www.matronics.com/Navigator?Yak-List |
3[b]
| | - The Matronics Yak-List Email Forum - | | | Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:
http://www.matronics.com/Navigator?Yak-List |
|
|
|
| Back to top |
|
|
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|
Get Email Distribution Too!
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
