Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Voltage Regulator Question

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List
View previous topic :: View next topic  
Author Message
woody



Joined: 26 Mar 2013
Posts: 22
Location: Gulf Coast

PostPosted: Tue Oct 28, 2014 5:57 pm    Post subject: Voltage Regulator Question Reply with quote

I have a Rotax 503 DCDI on my Firestar with a three phase regulator that's got me wondering. After I start the engine (electric) & turn on the EIS, I get a warning light and the EIS flashes 16.9vdc, slides up to 18.2vdc. This lasts about one minute and then the voltage slips back to about 14.4-14.5 & stays there. This has happened the last two times that I've flown the plane.
Has anyone else experienced anything similar to this?


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
View user's profile Send private message
byoungplumbing(at)gmail.c
Guest





PostPosted: Tue Oct 28, 2014 6:23 pm    Post subject: Voltage Regulator Question Reply with quote

I've never had the problem... first thing I would look at is whether the
sense line to the voltage regulator from the battery/ 12 v buss,,, has a
good connection. sometimes a bit of corrosion will cause problems....
pull and reset the connector, and check the wire connection to the
connector.

educated guess.

boyd



I have a Rotax 503 DCDI on my Firestar with a three phase regulator that's
got me wondering. After I start the engine (electric) & turn on the EIS, I
get a warning light and the EIS flashes 16.9vdc, slides up to 18.2vdc. This
lasts about one minute and then the voltage slips back to about 14.4-14.5 &
stays there. This has happened the last two times that I've flown the plane.
Has anyone else experienced anything similar to this?
---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com


- The Matronics Kolb-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Kolb-List
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> Kolb-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group