Matronics Email Lists :: View topic - monowheel brake caliper mounting position

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

monowheel brake caliper mounting position

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

rowlandcarson(at)gmail.co
Guest

Posted: Thu Dec 04, 2014 3:56 am Post subject: monowheel brake caliper mounting position

I seem to recall a discussion some years back about the optimum position for mounting the monowheel brake caliper, because folk found in service that there was a problem with the standard position.



I’ve searched the Matronics archives for the Europa list but have not found a relevant message thread.



The manual illustration shows the brake caliper mounted in-line with the landing gear arm, but (without drilling any new holes) there are 2 other possibilities.



Can anyone tell me which one is the optimum in practice?



And is there any LAA Engineering issue with changing the brake mounting?



in friendship



Rowland



| Rowland Carson          ... that's Rowland with a 'w' ...

| <rowlandcarson(at)gmail.com>            http://www.rowlandcarson.org.uk

| Skype, Twitter: rowland_carson      Facebook: Rowland Carson

| pictures: http://picasaweb.google.com/rowlandcarson

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

pete(at)lawless.info
Guest

Posted: Thu Dec 04, 2014 4:35 am Post subject: monowheel brake caliper mounting position

Hi Roland



Just rotate it round by one hole so the caliper is pointing backwards 

more or less horizontal. Mine needed a small bulge made in the side of 

the wheel well to accommodate it.  The idea is that if you get a flat 

tyre it does not get ripped to pieces by rubbing on the caliper.



Pete

G-RMAC #109



On 04/12/14 11:55, Rowland Carson wrote:

 	  Quote: 	
		   



 I seem to recall a discussion some years back about the optimum position for mounting the monowheel brake caliper, because folk found in service that there was a problem with the standard position.



 I’ve searched the Matronics archives for the Europa list but have not found a relevant message thread.



 The manual illustration shows the brake caliper mounted in-line with the landing gear arm, but (without drilling any new holes) there are 2 other possibilities.



 Can anyone tell me which one is the optimum in practice?



 And is there any LAA Engineering issue with changing the brake mounting?



 in friendship



 Rowland



 | Rowland Carson          ... that's Rowland with a 'w' ...

 | <rowlandcarson(at)gmail.com>            http://www.rowlandcarson.org.uk

 | Skype, Twitter: rowland_carson      Facebook: Rowland Carson

 | pictures: http://picasaweb.google.com/rowlandcarson

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Fred Klein

Joined: 26 Mar 2012
Posts: 503

Posted: Thu Dec 04, 2014 9:22 pm Post subject: monowheel brake caliper mounting position

Can anyone offer a photo of this revised brake location/configuration?…I’d be much obliged…Fred



 	  Quote: 	
		   On Dec 4, 2014, at 4:35 AM, Pete Lawless <pete(at)lawless.info> wrote:

 

 

 

 Hi Roland

 

 Just rotate it round by one hole so the caliper is pointing backwards more or less horizontal. Mine needed a small bulge made in the side of the wheel well to accommodate it.  The idea is that if you get a flat tyre it does not get ripped to pieces by rubbing on the caliper.

 

 Pete

 G-RMAC #109

 

 On 04/12/14 11:55, Rowland Carson wrote:

> 

> 

> I seem to recall a discussion some years back about the optimum position for mounting the monowheel brake caliper, because folk found in service that there was a problem with the standard position.

> 

> I’ve searched the Matronics archives for the Europa list but have not found a relevant message thread.

> 

> The manual illustration shows the brake caliper mounted in-line with the landing gear arm, but (without drilling any new holes) there are 2 other possibilities.

> 

> Can anyone tell me which one is the optimum in practice?

> 

> And is there any LAA Engineering issue with changing the brake mounting?

> 

> in friendship

> 

> Rowland

> 

> | Rowland Carson          ... that's Rowland with a 'w' ...

> | <rowlandcarson(at)gmail.com>            http://www.rowlandcarson.org.uk

> | Skype, Twitter: rowland_carson      Facebook: Rowland Carson

> | pictures: http://picasaweb.google.com/rowlandcarson

> 

> 

> 

> 

> 

> 

>

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Remi Guerner

Joined: 14 Dec 2010
Posts: 284

Posted: Fri Dec 05, 2014 12:38 am Post subject: Re: monowheel brake caliper mounting position

Fred,

I changed the position of my caliper a few years ago. The attached picture shows how it is now. This position was choosen so that, when in the landing gear is in the retracted position, the caliper does not interfere with the starboard rudder cable as it did before and it does not protude in the slipsream.   

Regards

Remi

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

P2180004a.jpg

Description:

Filesize:

272.51 KB

Viewed:

5123 Time(s)

Fred Klein

Joined: 26 Mar 2012
Posts: 503

Posted: Fri Dec 05, 2014 6:29 am Post subject: monowheel brake caliper mounting position

Thanks Remi…picture’s worth 1000 words…Fred 	  Quote: 	
		  On Dec 5, 2014, at 12:38 AM, Remi Guerner <air.guerner(at)orange.fr (air.guerner(at)orange.fr)> wrote:

--> Europa-List message posted by: "Remi Guerner" <air.guerner(at)orange.fr (air.guerner(at)orange.fr)>Fred,I changed the position of my caliper a few years ago. The attached picture shows how it is now. This position was choosen so that, when in the landing gear is in the retracted position, the caliper does not interfere with the starboard rudder cable as it did before and it does not protude in the slipsream.   RegardsRemiRead this topic online here:http://forums.matronics.com/viewtopic.php?p=435354#435354Attachments: http://forums.matronics.com//files/p2180004a_103.jpg

	




 [quote][b]

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

JonSmith

Joined: 21 May 2010
Posts: 110

Posted: Fri Dec 05, 2014 10:42 pm Post subject: Re: monowheel brake caliper mounting position

Hi Roland,  the (revised) brake caliper position was covered in the factory tech talk issue 22 on page 13.  Attached is a copy of the page.  I bought a new mounting bracket from the factory some years ago to replace the original design on my classic.  Five minute job (almost) to replace it and it saves carving holes in the wheel well sides! Cheers!

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

image.jpg

Description:

Filesize:

676.16 KB

Viewed:

5082 Time(s)

_________________
G-TERN
Classic Mono

rowlandcarson(at)gmail.co
Guest

Posted: Sat Dec 06, 2014 12:25 am Post subject: monowheel brake caliper mounting position

On 6 Dec 2014, at 06:42, JonSmith <jonsmitheuropa(at)tiscali.co.uk> wrote:



 	  Quote: 	
		   Hi Roland,  the (revised) brake caliper position was covered in the factory tech talk issue 22 on page 13.  Attached is a copy of the page.  I bought a new mounting bracket from the factory some years ago to replace the original design on my classic.  Five minute job (almost) to replace it and it saves carving holes in the wheel well sides! Cheers!


	


Jon - thanks for the info. I hadn’t realised this discussion was soooo long ago! I do have a SX kit and so my brake caliper is already in the recommended position. I can relax now (about this issue, anyway).



in friendship



Rowland



| Rowland Carson          ... that's Rowland with a 'w' ...

| <rowlandcarson(at)gmail.com>            http://www.rowlandcarson.org.uk

| Skype, Twitter: rowland_carson      Facebook: Rowland Carson

| pictures: http://picasaweb.google.com/rowlandcarson

- The Matronics Europa-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Europa-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum