Matronics Email Lists :: View topic - Icom a210 display problems

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Icom a210 display problems

Matronics Email Lists Forum Index -> Avionics-List

View previous topic :: View next topic

Author Message

Rebel56

Joined: 10 Dec 2014
Posts: 11

Posted: Thu Dec 11, 2014 12:36 pm Post subject: Icom a210 display problems

Less than 30 hours on unit, but out of warranty. Radio works well for a while, then without warning display will dim then disappear. Dial lights are still on and can transmit and receive but nothing showing on display. Have already replaced the ribbon cable.. No problem for 10 hours of flying, then problem started again. Power off and on works sometimes, but most times display does not light up. Even tried turning dimmer function off.



Any ideas?

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

tim2542(at)sbcglobal.net
Guest

Posted: Thu Dec 11, 2014 1:38 pm Post subject: Icom a210 display problems

Ship it to Icom with a letter explaining the issue. They are a whole lot better to deal with than Garmin. I had a squelch issue on mine out of warranty they fixed for a reasonable amount. IIRC shipping and repairs including a software update was less than $100

Tim



 	  Quote: 	
		   On Dec 11, 2014, at 12:36 PM, Rebel56 <Rebel56(at)rogers.com> wrote:

 

 

 

 Less than 30 hours on unit, but out of warranty. Radio works well for a while, then without warning display will dim then disappear. Dial lights are still on and can transmit and receive but nothing showing on display. Have already replaced the ribbon cable.. No problem for 10 hours of flying, then problem started again. Power off and on works sometimes, but most times display does not light up. Even tried turning dimmer function off.

 

 Any ideas?

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=435602#435602

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

jdubner

Joined: 17 Jul 2012
Posts: 35
Location: Independence, OR

Posted: Thu Dec 11, 2014 3:40 pm Post subject: Icom a210 display problems

The A210 has an EL display and I would start by looking at the voltages supplied 

to it.  The service manual shows IC75, a BD9001F IC supplying 16V and IC2, an 

NJM2307001 IC supplying 3V.



Email me if you'd like me to email you the service manual (a 10MB file).



--

Joe

RV-8A

Independence, OR



Rebel56 wrote, On 12/11/2014 12:36:

 	  Quote: 	
		   

 

 Less than 30 hours on unit, but out of warranty. Radio works well for a while, then without warning display will dim then disappear. Dial lights are still on and can transmit and receive but nothing showing on display. Have already replaced the ribbon cable.. No problem for 10 hours of flying, then problem started again. Power off and on works sometimes, but most times display does not light up. Even tried turning dimmer function off.

 

 Any ideas?

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

IC_A210_Partial_Block_Diagram.jpg

Description:

Filesize:

38.07 KB

Viewed:

10456 Time(s)

_________________
Independence, OR

Rebel56

Joined: 10 Dec 2014
Posts: 11

Posted: Thu Dec 11, 2014 5:11 pm Post subject: Re: Icom a210 display problems

Thanks Joe, but I am not that tech savvy. Best I can do is clean the basic contacts and remove the ribbon cable, but beyond that I would be dangerous.

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

yellowduckduo(at)gmail.co
Guest

Posted: Thu Dec 11, 2014 6:08 pm Post subject: Icom a210 display problems

Tim

Any chance they made the squelch more effective for you?

thanks

Ken

On 11/12/2014 4:36 PM, Tim Andres wrote:

 	  Quote: 	

 Ship it to Icom with a letter explaining the issue. They are a whole lot better to deal with than Garmin. I had a squelch issue on mine out of warranty they fixed for a reasonable amount. IIRC shipping and repairs including a software update was less than $100

 Tim

> On Dec 11, 2014, at 12:36 PM, Rebel56 <Rebel56(at)rogers.com> wrote:

>

> 

>

> Less than 30 hours on unit, but out of warranty. Radio works well for a while, then without warning display will dim then disappear. Dial lights are still on and can transmit and receive but nothing showing on display. Have already replaced the ribbon cable.. No problem for 10 hours of flying, then problem started again. Power off and on works sometimes, but most times display does not light up. Even tried turning dimmer function off.

>

> Any ideas?

>

>

> Read this topic online here:

>

> http://forums.matronics.com/viewtopic.php?p=435602#435602

>

>

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

tim2542(at)sbcglobal.net
Guest

Posted: Thu Dec 11, 2014 6:35 pm Post subject: Icom a210 display problems

Yes, the issue I had was continuous open squelch, they said it was in spec but tightened it up for me. I bought it from a shop in Canada, then when I needed service shipped it to Icom America. That was a mistake evidently, somehow they are two separate entities and could not/would not warrant it. Wasn't too happy about, but still least the charge was reasonable. Seems like it was $35, then shipping both ways.

Tim





 	  Quote: 	
		   On Dec 11, 2014, at 6:08 PM, C&K <yellowduckduo(at)gmail.com> wrote:

 

 

 

 Tim

 Any chance they made the squelch more effective for you?

 thanks

 Ken

 

> On 11/12/2014 4:36 PM, Tim Andres wrote:

> 

> 

> Ship it to Icom with a letter explaining the issue. They are a whole lot better to deal with than Garmin. I had a squelch issue on mine out of warranty they fixed for a reasonable amount. IIRC shipping and repairs including a software update was less than $100

> Tim

> 

> 

> 

>> On Dec 11, 2014, at 12:36 PM, Rebel56 <Rebel56(at)rogers.com> wrote:

>> 

>> 

>> 

>> Less than 30 hours on unit, but out of warranty. Radio works well for a while, then without warning display will dim then disappear. Dial lights are still on and can transmit and receive but nothing showing on display. Have already replaced the ribbon cable.. No problem for 10 hours of flying, then problem started again. Power off and on works sometimes, but most times display does not light up. Even tried turning dimmer function off.

>> 

>> Any ideas?

>> 

>> 

>> 

>> 

>> Read this topic online here:

>> 

>> http://forums.matronics.com/viewtopic.php?p=435602#435602

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

yellowduckduo(at)gmail.co
Guest

Posted: Thu Dec 11, 2014 7:13 pm Post subject: Icom a210 display problems

Thanks Tim

That's funny because I purchased in USA but am in Canada. I rather 

suspected that mine would have to go back to the US.

A dsub capacitor filter on the leads to my glass ADI  helped a bit but 

even with the radio on a separate battery I have to use the max squelch 

setting.

It is a lot more sensitive than the older A200. Good to know they can 

apparently adjust it and I'll talk to them again.

Ken

do not archive

On 11/12/2014 9:33 PM, Tim Andres wrote:

 	  Quote: 	

 Yes, the issue I had was continuous open squelch, they said it was in spec but tightened it up for me. I bought it from a shop in Canada, then when I needed service shipped it to Icom America. That was a mistake evidently, somehow they are two separate entities and could not/would not warrant it. Wasn't too happy about, but still least the charge was reasonable. Seems like it was $35, then shipping both ways.

 Tim

> On Dec 11, 2014, at 6:08 PM, C&K <yellowduckduo(at)gmail.com> wrote:

>

> 

>

> Tim

> Any chance they made the squelch more effective for you?

> thanks

> Ken

>

>> On 11/12/2014 4:36 PM, Tim Andres wrote:

>> 

>>

>> Ship it to Icom with a letter explaining the issue. They are a whole lot better to deal with than Garmin. I had a squelch issue on mine out of warranty they fixed for a reasonable amount. IIRC shipping and repairs including a software update was less than $100

>> Tim

>>

>>

>>

>>> On Dec 11, 2014, at 12:36 PM, Rebel56 <Rebel56(at)rogers.com> wrote:

>>>

>>> 

>>>

>>> Less than 30 hours on unit, but out of warranty. Radio works well for a while, then without warning display will dim then disappear. Dial lights are still on and can transmit and receive but nothing showing on display. Have already replaced the ribbon cable.. No problem for 10 hours of flying, then problem started again. Power off and on works sometimes, but most times display does not light up. Even tried turning dimmer function off.

>>>

>>> Any ideas?

>>>

>>>

>>>

>>>

>>> Read this topic online here:

>>>

>>> http://forums.matronics.com/viewtopic.php?p=435602#435602

>

>

- The Matronics Avionics-List Email Forum -

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?Avionics-List

Display posts from previous:

	Matronics Email Lists Forum Index -> Avionics-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum