Matronics Email Lists :: View topic - Removing and Attaching Wings Single Handed

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

Removing and Attaching Wings Single Handed

Matronics Email Lists Forum Index -> Europa-List

View previous topic :: View next topic

Author Message

genie(at)swissmail.org
Guest

Posted: Sun Jan 11, 2015 7:05 am Post subject: Removing and Attaching Wings Single Handed

Hello,



As I am considering the Europa I would be grateful if you could inform 

me about the possibilities of removing and attaching the wings single 

handed. I have seen in the manual that this can be done by two people. 

However, my requirement is for this to be done single handed, as hangar 

space is expensive.



My idea is to go to the airfield, attach the wings on the aircraft, fly 

and prior to inserting in the hangar to remove the wings. Is there any 

equipment available which enables this to be done single handed with an 

Europa? In that case I reckon that the equipment will be bound at the 

home base so removing and reattaching wings will not be possible at 

other airfields.



Thank you for your reply.



George Nielsen

alan.twigg775(at)gmail.co
Guest

Posted: Sun Jan 11, 2015 7:21 am Post subject: Removing and Attaching Wings Single Handed

Many gliders and some Europas have a 'one man (woman)' rigging aid. It consists of a wing dolly that can be rotated between vertical and horizontal, while you handle the wing root. I digest you look initially on glider web sites.

Regards

Alan Twigg

MotorGlider

Kit463



Sent from my iPhone



 	  Quote: 	
		   On 11 Jan 2015, at 15:04, George Nielsen <genie(at)swissmail.org> wrote:

 

 

 

 Hello,

 

 As I am considering the Europa I would be grateful if you could inform me about the possibilities of removing and attaching the wings single handed. I have seen in the manual that this can be done by two people. However, my requirement is for this to be done single handed, as hangar space is expensive.

 

 My idea is to go to the airfield, attach the wings on the aircraft, fly and prior to inserting in the hangar to remove the wings. Is there any equipment available which enables this to be done single handed with an Europa? In that case I reckon that the equipment will be bound at the home base so removing and reattaching wings will not be possible at other airfields.

 

 Thank you for your reply.

 

 George Nielsen

rowlandcarson(at)gmail.co
Guest

Posted: Sun Jan 11, 2015 7:43 am Post subject: Removing and Attaching Wings Single Handed

On 11 Jan 2015, at 15:04, George Nielsen <genie(at)swissmail.org> wrote:



 	  Quote: 	
		   As I am considering the Europa I would be grateful if you could inform me about the possibilities of removing and attaching the wings single handed. I have seen in the manual that this can be done by two people. However, my requirement is for this to be done single handed, as hangar space is expensive.

 

 My idea is to go to the airfield, attach the wings on the aircraft, fly and prior to inserting in the hangar to remove the wings. Is there any equipment available which enables this to be done single handed with an Europa? In that case I reckon that the equipment will be bound at the home base so removing and reattaching wings will not be possible at other airfields.


	


George - yes, one-man (or one-woman) rigging is possible. I’ve been doing quite a bit of that recently while setting up the wing pin sockets; see my photo pages:



http://www.rowlandcarson.org.uk/aviation/europa_435/dolly_transfer.php



http://www.rowlandcarson.org.uk/aviation/europa_435/first_wing_rig.php



http://www.rowlandcarson.org.uk/aviation/europa_435/try_wing_incidence.php



for pictures of the fuselage and wing dollies.



Yes, the rigging kit definitely stays at the departure airfield!



My dollies came with the covered trailer I bought from Roger Huttlestone who operates from an industrial unit near Moreton-in-Marsh. However, I believe that he is no longer making the trailers. It's possible he might consider making the rigging kit if he still has the templates and fixtures.



Please let me know if you would like contact details for Roger (he does seem to be well-known to Google . . . ).



in friendship



Rowland



| Rowland Carson                                      ... that's Rowland with a 'w' ...

| <rowlandcarson(at)gmail.com>  http://www.rowlandcarson.org.uk/aviation/europa_435/index.php

| LAA #016532

alan.twigg775(at)gmail.co
Guest

Posted: Sun Jan 11, 2015 8:02 am Post subject: Removing and Attaching Wings Single Handed

Row land, I see you have two dollys, have you found a cheap source, I am being quoted over Â£500 for one.

Alan Twigg

Kit 463

Getting ready for cockpit trim.

Sent from my iPhone

 	  Quote: 	
		   On 11 Jan 2015, at 15:42, Rowland Carson <rowlandcarson(at)gmail.com> wrote:

> On 11 Jan 2015, at 15:04, George Nielsen <genie(at)swissmail.org> wrote:

> 

> As I am considering the Europa I would be grateful if you could inform me about the possibilities of removing and attaching the wings single handed. I have seen in the manual that this can be done by two people. However, my requirement is for this to be done single handed, as hangar space is expensive.

> 

> My idea is to go to the airfield, attach the wings on the aircraft, fly and prior to inserting in the hangar to remove the wings. Is there any equipment available which enables this to be done single handed with an Europa? In that case I reckon that the equipment will be bound at the home base so removing and reattaching wings will not be possible at other airfields.

 George - yes, one-man (or one-woman) rigging is possible. Iâ€™ve been doing quite a bit of that recently while setting up the wing pin sockets; see my photo pages:

 http://www.rowlandcarson.org.uk/aviation/europa_435/dolly_transfer.php

 http://www.rowlandcarson.org.uk/aviation/europa_435/first_wing_rig.php

 http://www.rowlandcarson.org.uk/aviation/europa_435/try_wing_incidence.php

 for pictures of the fuselage and wing dollies.

 Yes, the rigging kit definitely stays at the departure airfield!

 My dollies came with the covered trailer I bought from Roger Huttlestone who operates from an industrial unit near Moreton-in-Marsh. However, I believe that he is no longer making the trailers. It's possible he might consider making the rigging kit if he still has the templates and fixtures.

 Please let me know if you would like contact details for Roger (he does seem to be well-known to Google . . . ).

 in friendship

 Rowland

 | Rowland Carson                                      ... that's Rowland with a 'w' ...

 | <rowlandcarson(at)gmail.com>  http://www.rowlandcarson.org.uk/aviation/europa_435/index.php

 | LAA #016532

Philipgeorge347(at)hotmai
Guest

Posted: Sun Jan 11, 2015 8:33 am Post subject: Removing and Attaching Wings Single Handed

Hi  George

 Yes it is straight forward single person rigging as Alan  said. You will need a dolly constructed  that swivels thru 90 degrees  with golf cart wheels etc.  I constructed one ,as I use to rig and de- rig my europa every flight up until  3 or 4  years ago. 

              Philip George.

 

 

 

 

  Sent from Samsung Mobile

 

 

 

 -------- Original message --------

 From: George Nielsen 

 Date:11/01/2015 15:08 (GMT+00:00) 

 To: europa-list(at)matronics.com 

 Subject: Removing and Attaching Wings Single Handed 

 

 

  --> Europa-List message posted by: George Nielsen <genie(at)swissmail.org>

 

 Hello,

 

 As I am considering the Europa I would be grateful if you could inform 

 me about the possibilities of removing and attaching the wings single 

 handed. I have seen in the manual that this can be done by two people. 

 However, my requirement is for this to be done single handed, as hangar 

 space is expensive.

 

 My idea is to go to the airfield, attach the wings on the aircraft, fly 

 and prior to inserting in the hangar to remove the wings. Is there any 

 equipment available which enables this to be done single handed with an 

 Europa? In that case I reckon that the equipment will be bound at the 

 home base so removing and reattaching wings will not be possible at 

 other airfields.

 

 Thank you for your reply.

 

 George Nielsen

 

 ===========

 r Lists This Month --

 ;  (And Get Some AWESOME FREE Gifts!)

 k on

 > > aeroelectric.com">www.aeroelectric.com

 http://www.buildersbooks.com">www.buildersbooks.com

 .homebuilthelp.com">www.homebuilthelp.com

 w.mypilotstore.com">www.mypilotstore.com

 ww.mrrace.com">www.mrrace.com

 tion">http://www.matronics.com/contribution

 ;                     -Matt Dralle, List Admin.

 ===========

 ; - The Europa-List Email Forum -

 r?Europa-List">http://www.matronics.com/Navigator?Europa-List

 ===========

 ;      - MATRONICS WEB FORUMS -

 ://forums.matronics.com

 ===========

 

 

 

 

 

    [quote][b]

ptag.dev(at)talktalk.net
Guest

Posted: Sun Jan 11, 2015 10:42 am Post subject: Removing and Attaching Wings Single Handed

Hi! George,

You don't specify Mono Wheel or trike.

However my submissions shown at:-

http://www.users.waitrose.com/~jcliff/BobH/BobH.htm



--

rowlandcarson(at)gmail.co
Guest

Posted: Sun Jan 11, 2015 10:49 am Post subject: Removing and Attaching Wings Single Handed

On 11 Jan 2015, at 16:02, alan.twigg775(at)gmail.com wrote:



 	  Quote: 	
		   Row land, I see you have two dollys, have you found a cheap source, I am being quoted over £500 for one.


	


Alan - I don’t know what proportion of the trailer cost was allocated by Roger Huttlestone to the dollies etc. He gave me a discount on the standard trailer and rigging set price because I fitted the ramp, floored, undersealed and wired the trailer myself, and also provided some manual labour for fitting the roof at his workshop. His bill in November 1999 came to £3850.



If Roger’s not prepared to make the rigging kit any more (I see he’s into car restorations now), I’m sure he wouldn’t mind you taking measurements from mine to prepare a spec for construction by A N Other.



in friendship



Rowland



| Rowland Carson          ... that's Rowland with a 'w' ...

| <rowlandcarson(at)gmail.com>            http://www.rowlandcarson.org.uk

| Skype, Twitter: rowland_carson      Facebook: Rowland Carson

| pictures: http://picasaweb.google.com/rowlandcarson

wdaniell.longport(at)gmai
Guest

Posted: Sun Jan 11, 2015 10:55 am Post subject: Removing and Attaching Wings Single Handed

My rather unsighly but effective set up.Â  There are two pretty much the same per wing...I copied them from a much neater version but I dont remember who.

 Will On Jan 11, 2015 10:23 AM,  <alan.twigg775(at)gmail.com (alan.twigg775(at)gmail.com)> wrote: 	  Quote: 	
		  --> Europa-List message posted by: alan.twigg775(at)gmail.com (alan.twigg775(at)gmail.com)

 

 Many gliders and some Europas have a 'one man (woman)' rigging aid. It consists of a wing dolly that can be rotated between vertical and horizontal, while you handle the wing root. I digest you look initially on glider web sites.

 Regards

 Alan Twigg

 MotorGlider

 Kit463

 

 Sent from my iPhone

 

 > On 11 Jan 2015, at 15:04, George Nielsen <genie(at)swissmail.org (genie(at)swissmail.org)> wrote:

 >

 > --> Europa-List message posted by: George Nielsen <genie(at)swissmail.org (genie(at)swissmail.org)>

 >

 > Hello,

 >

 > As I am considering the Europa I would be grateful if you could inform me about the possibilities of removing and attaching the wings single handed. I have seen in the manual that this can be done by two people. However, my requirement is for this to be done single handed, as hangar space is expensive.

 >

 > My idea is to go to the airfield, attach the wings on the aircraft, fly and prior to inserting in the hangar to remove the wings. Is there any equipment available which enables this to be done single handed with an Europa? In that case I reckon that the equipment will be bound at the home base so removing and reattaching wings will not be possible at other airfields.

 >

 > Thank you for your reply.

 >

 > George Nielsen

 >

 >

 >

 >

 

 

 ===========

 br> fts!)

 r> > com" target="_blank">www.aeroelectric.com

 w.buildersbooks.com" target="_blank">www.buildersbooks.com

 p.com" target="_blank">www.homebuilthelp.com

 e.com" target="_blank">www.mypilotstore.com

 " target="_blank">www.mrrace.com

 target="_blank">http://www.matronics.com/contribution

 Â  Â  Â  Â  Â  -Matt Dralle, List Admin.

 ===========

 pa-List" target="_blank">http://www.matronics.com/Navigator?Europa-List

 ===========

  FORUMS -

 _blank">http://forums.matronics.com

 ===========

20150111_135331.jpg

Description:

Filesize:

1.91 MB

Viewed:

9595 Time(s)

hagargs(at)earthlink.net
Guest

Posted: Sun Jan 11, 2015 3:00 pm Post subject: Removing and Attaching Wings Single Handed

With the wings off you will need a dolly that quickly attaches and removes.  The unit I ginned up has been very robust.  I have done full throttle run ups many times with the wings off. With the plane tied to the back of the car of course.  See short video  



https://www.youtube.com/watch?v=BHYtCRwemiA



Steve



--

grahamsingleton(at)btinte
Guest

Posted: Mon Jan 12, 2015 2:20 am Post subject: Removing and Attaching Wings Single Handed

Alan

have a look at Andreas Doblhof's one man rig. Five minutes when I watched him do it 

Graham

        From: "alan.twigg775(at)gmail.com" <alan.twigg775(at)gmail.com>

 To: "europa-list(at)matronics.com" <europa-list(at)matronics.com> 

 Sent: Sunday, 11 January 2015, 16:02

 Subject: Re: Europa-List: Removing and Attaching Wings Single Handed

--> Europa-List message posted by: alan.twigg775(at)gmail.com (alan.twigg775(at)gmail.com)

Row land, I see you have two dollys, have you found a cheap source, I am being quoted over Â£500 for one.

Alan Twigg

Kit 463

Getting ready for cockpit trim.

Sent from my iPhone

 	  Quote: 	
		   On 11 Jan 2015, at 15:42, Rowland Carson <rowlandcarson(at)gmail.com (rowlandcarson(at)gmail.com)> wrote:

 --> Europa-List message posted by: Rowland Carson <rowlandcarson(at)gmail.com (rowlandcarson(at)gmail.com)>

> On 11 Jan 2015, at 15:04, George Nielsen <genie(at)swissmail.org (genie(at)swissmail.org)> wrote:

> 

> As I am considering the  Europa I would be grateful if you could inform me about the possibilities of removing and attaching the wings single handed. I have seen in the manual that this can be done by two people. However, my requirement is for this to be done single handed, as hangar space is expensive.

> 

> My idea is to go to the airfield, attach the wings on the aircraft, fly and prior to inserting in the hangar to remove the wings. Is there any equipment available which enables this to be done single handed with an Europa? In that case I reckon that the equipment will be bound at the home base so removing and reattaching wings will not be possible at other airfields.

 George - yes, one-man (or one-woman) rigging is possible. Iâ€™ve been doing quite a bit of that recently while setting up the wing pin sockets; see my photo pages:

 http://www.rowlandcarson.org.uk/aviation/europa_435/dolly_transfer.php

 http://www.rowlandcarson.org.uk/aviation/europa_435/first_wing_rig.php

 http://www.rowlandcarson.org.uk/aviation/europa_435/try_wing_incidence.php

 for pictures of the fuselage and wing dollies.

 Yes, the rigging kit definitely stays at the departure airfield!

 My dollies came with the covered trailer I bought from Roger Huttlestone who operates from an industrial unit near Moreton-in-Marsh. However, I believe that he is no longer making the trailers. It's possible he might consider making the rigging kit if he still has the templates and fixtures.

 Please let me  know if you would like contact details for Roger (he does seem to be well-known to Google . . . ).

 in friendship

 Rowland

 | Rowland Carson                                      ... that's Rowland with a 'w' ...

 | <rowlandcarson(at)gmail.com (rowlandcarson(at)gmail.com)>  http://www.rowlandcarson.org.uk/aviation/europa_435/index.php

 | LAA #016532[b]http://www.matronics.com/Navigator?Europa-List

_ref="http://forums.matronics.com/" target="_blank">http://forums.matron===================

DSCF1117.JPG

Description:

Filesize:

536.76 KB

Viewed:

9560 Time(s)

DSCF1118.JPG

Description:

Filesize:

557.63 KB

Viewed:

9560 Time(s)

DSCF1119.JPG

Description:

Filesize:

556.72 KB

Viewed:

9560 Time(s)

DSCF1120.JPG

Description:

Filesize:

540.21 KB

Viewed:

9560 Time(s)

DSCF1122.JPG

Description:

Filesize:

549.29 KB

Viewed:

9560 Time(s)

Jim Kelly

Joined: 25 Jan 2014
Posts: 70
Location: England

Posted: Mon Jan 12, 2015 4:27 am Post subject: Removing and Attaching Wings Single Handed

Hi Graham,Â  Â  Â  Â  Â  Â  Â  Â  Â  Â Is there anymore info on this system, I can't figure it out.

Cheers

Jim Kelly G-BWEG

On Monday, January 12, 2015, GRAHAM SINGLETON <grahamsingleton(at)btinternet.com (grahamsingleton(at)btinternet.com)> wrote:

[quote]Alan

have a look at Andreas Doblhof's one man rig. Five minutes when I watched him do it 

Graham

        From: "[url=javascript:_e(%7B%7D,'cvml','alan.twigg775(at)gmail.com');]alan.twigg775(at)gmail.com[/url]" <[url=javascript:_e(%7B%7D,'cvml','alan.twigg775(at)gmail.com');]alan.twigg775(at)gmail.com[/url]>

 To: "[url=javascript:_e(%7B%7D,'cvml','europa-list(at)matronics.com');]europa-list(at)matronics.com[/url]" <[url=javascript:_e(%7B%7D,'cvml','europa-list(at)matronics.com');]europa-list(at)matronics.com[/url]> 

 Sent: Sunday, 11 January 2015, 16:02

 Subject: Re: Removing and Attaching Wings Single Handed

--> Europa-List message posted by: [url=javascript:_e(%7B%7D,'cvml','alan.twigg775(at)gmail.com');]alan.twigg775(at)gmail.com[/url]

Row land, I see you have two dollys, have you found a cheap source, I am being quoted over Â£500 for one.

Alan Twigg

Kit 463

Getting ready for cockpit trim.

Sent from my iPhone

 	  Quote: 	
		   On 11 Jan 2015, at 15:42, Rowland Carson <[url=javascript:_e(%7B%7D,'cvml','rowlandcarson(at)gmail.com');]rowlandcarson(at)gmail.com[/url]> wrote:

 --> Europa-List message posted by: Rowland Carson <[url=javascript:_e(%7B%7D,'cvml','rowlandcarson(at)gmail.com');]rowlandcarson(at)gmail.com[/url]>

> On 11 Jan 2015, at 15:04, George Nielsen <[url=javascript:_e(%7B%7D,'cvml','genie(at)swissmail.org');]genie(at)swissmail.org[/url]> wrote:

> 

> As I am considering the  Europa I would be grateful if you could inform me about the possibilities of removing and attaching the wings single handed. I have seen in the manual that this can be done by two people. However, my requirement is for this to be done single handed, as hangar space is expensive.

> 

> My idea is to go to the airfield, attach the wings on the aircraft, fly and prior to inserting in the hangar to remove the wings. Is there any equipment available which enables this to be done single handed with an Europa? In that case I reckon that the equipment will be bound at the home base so removing and reattaching wings will not be possible at other airfields.

 George - yes, one-man (or one-woman) rigging is possible. Iâ€™ve been doing quite a bit of that recently while setting up the wing pin sockets; see my photo pages:

 http://www.rowlandcarson.org.uk/aviation/europa_435/dolly_transfer.php

 http://www.rowlandcarson.org.uk/aviation/europa_435/first_wing_rig.php

 http://www.rowlandcarson.org.uk/aviation/europa_435/try_wing_incidence.php

 for pictures of the fuselage and wing dollies.

 Yes, the rigging kit definitely stays at the departure airfield!

 My dollies came with the covered trailer I bought from Roger Huttlestone who operates from an industrial unit near Moreton-in-Marsh. However, I believe that he is no longer making the trailers. It's possible he might consider making the rigging kit if he still has the templates and fixtures.

 Please let me  know if you would like contact details for Roger (he does seem to be well-known to Google . . . ).

 in friendship

 Rowland

 | Rowland CarsonÂ  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  Â  ... that's Rowland with a 'w' ...

 | <[url=javascript:_e(%7B%7D,'cvml','rowlandcarson(at)gmail.com');]rowlandcarson(at)gmail.com[/url]>Â  http://www.rowlandcarson.org.uk/aviation/europa_435/index.php

 | LAA #016532http://www.matronics.com/Navigator?Europa-List

_ref="http://forums.matronics.com/" target="_blank">http://forums.matron===================

[b]

_________________
Jim GBWEG

genie(at)swissmail.org
Guest

Posted: Mon Jan 12, 2015 1:38 pm Post subject: Removing and Attaching Wings Single Handed

Hi Rob,



You are right: I did not specify monowheel, nosewheel or conventional 

tailwheel. That is because I am flexible, as it may be that with one 

configuration it is easier to remove and attach the wings. However, I 

doubt whether this is the case. The replies I received have indeed given 

me the impression that the type of undercarriage does not make much 

difference in this respect.



The configuration I am most inclined to get is monowheel, as it is the 

most efficient in flight as it is retractable. Thus it makes bes use of 

the space between the two seats.



Thanks to all of you who replied.



George Nielsen



On 12/01/2015 09:02, Europa-List Digest Server wrote:

[quote]

 Time: 10:42:17 AM PST US

 From: "Bob Harrison" <ptag.dev(at)talktalk.net>

 Subject: RE: Removing and Attaching Wings Single Handed

 Hi! George,

 You don't specify Mono Wheel or trike.

 However my submissions shown at:-

 http://www.users.waitrose.com/~jcliff/BobH/BobH.htm



 --

genie(at)swissmail.org
Guest

Posted: Mon Jan 12, 2015 2:03 pm Post subject: Removing and Attaching Wings Single Handed

Rowland, thank you for your replies and       the links to photos. 

       

       I have found the following about Roger Huttlestone: 

       

       Unit 103b Northwick Busns Cntr

       Moreton-In-Marsh, Gloucestershire GL56 9RF

       United Kingdom

       tel: +44 1386700709

       

       See: 

       

 http://transportation.zibb.co.uk/profile/roger+huttlestone/gb/gloucestershire/moreton-in-marsh/gl56+9rf/23710237

       

       Roger has entries in LinedIn, Facebook and Twitter.

       

       Considering the fact that this is a company I am surprised that it       does not have any URL. I could not find any e-mail address either.       But that is understandable, as putting one would make one       vulnerable to Web trawling, spam and what not.

       

       George Nielsen

       

       On 12/01/2015 09:02, Europa-List Digest Server wrote:

     

     [quote]                	  Quote: 	
		            	  Quote: 	
		  As I am considering the Europa I would be grateful if you could inform me about

	
       the possibilities of removing and attaching the wings single handed. I have

seen in the manual that this can be done by two people. However, my requirement

is for this to be done single handed, as hangar space is expensive.

          	  Quote: 	
		  

My idea is to go to the airfield, attach the wings on the aircraft, fly and prior

	
       to inserting in the hangar to remove the wings. Is there any equipment available

which enables this to be done single handed with an Europa? In that case

I reckon that the equipment will be bound at the home base so removing and

reattaching wings will not be possible at other airfields.



George - yes, one-man (or one-woman) rigging is possible. Ive been doing quite

a bit of that recently while setting up the wing pin sockets; see my photo pages:



http://www.rowlandcarson.org.uk/aviation/europa_435/dolly_transfer.php



http://www.rowlandcarson.org.uk/aviation/europa_435/first_wing_rig.php



http://www.rowlandcarson.org.uk/aviation/europa_435/try_wing_incidence.php



for pictures of the fuselage and wing dollies.



Yes, the rigging kit definitely stays at the departure airfield!



My dollies came with the covered trailer I bought from Roger Huttlestone who operates

from an industrial unit near Moreton-in-Marsh. However, I believe that

he is no longer making the trailers. It's possible he might consider making the

rigging kit if he still has the templates and fixtures.



Please let me know if you would like contact details for Roger (he does seem to

be well-known to Google . . . ).



in friendship



Rowland



| Rowland Carson                                      ... that's Rowland with a

'w' ...

| <rowlandcarson(at)gmail.com> (rowlandcarson(at)gmail.com)  http://www.rowlandcarson.org.uk/aviation/europa_435/index.php

| LAA #016532

	
     [b]

brian.davies(at)clara.co.
Guest

Posted: Tue Jan 13, 2015 12:49 am Post subject: Removing and Attaching Wings Single Handed

Hi George,



If you remove the wings on a Mono and do nothing else, it falls over.  If

you do the same thing on a Trigear or conventional, nothing happens!



I think this makes a significant difference to the ease of the process.



Ex Mono, now Trigear



Brian Davies



--

genie(at)swissmail.org
Guest

Posted: Tue Jan 13, 2015 1:54 pm Post subject: Removing and Attaching Wings Single Handed

Hi Jim,



This is what I found about Andreas Doblhof's system:



http://www.europaowners.org/main.php?g2_itemId=46082



http://sdunsmuir.net/EuropaOwners/public_html/Galley3/Builders-Album/Dolly/Andreas-Doblhof-s-rigging-system/Andreas_Doblhof_home



The Europa sports the Austrian flag on its fin and the vehicle has 

similarly an Austrian number plate.



George Nielsen



On 13/01/2015 09:02, Europa-List Digest Server wrote:

 	  Quote: 	
		   Time: 04:27:41 AM PST US

 Subject: Re: Removing and Attaching Wings Single Handed

 From: James Kelly <europajimkelly(at)gmail.com>



 Hi Graham,

                     Is there anymore info on this system, I can't figure it

 out.

 Cheers

 Jim Kelly G-BWEG



 On Monday, January 12, 2015, GRAHAM SINGLETON <

 grahamsingleton(at)btinternet.com> wrote:



> Alan

> have a look at Andreas Doblhof's one man rig. Five minutes when I watched

> him do it

> Graham

>    ------------------------------

>   *From:* "alan.twigg775(at)gmail.com

> <javascript:_e(%7B%7D,'cvml','alan.twigg775(at)gmail.com');>" <

> alan.twigg775(at)gmail.com

> <javascript:_e(%7B%7D,'cvml','alan.twigg775(at)gmail.com');>>

> *To:* "europa-list(at)matronics.com

> <javascript:_e(%7B%7D,'cvml','europa-list(at)matronics.com');>" <

> europa-list(at)matronics.com

> <javascript:_e(%7B%7D,'cvml','europa-list(at)matronics.com');>>

> *Sent:* Sunday, 11 January 2015, 16:02

> *Subject:* Re: Removing and Attaching Wings Single Handed

>

> <javascript:_e(%7B%7D,'cvml','alan.twigg775(at)gmail.com');>

>

> Row land, I see you have two dollys, have you found a cheap source, I am

> being quoted over =C2=A3500 for one.

> Alan Twigg

> Kit 463

> Getting ready for cockpit trim.

>

> Sent from my iPhone

Display posts from previous:

	Matronics Email Lists Forum Index -> Europa-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum