Matronics Email Lists Forum Index Matronics Email Lists
Web Forum Interface to the Matronics Email Lists
 
 Get Email Distribution Too!Get Email Distribution Too!    FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Delta-Pop ADS-B antenna placement

 
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List
View previous topic :: View next topic  
Author Message
recapen(at)earthlink.net
Guest





PostPosted: Tue Jan 20, 2015 8:44 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
wdleonard(at)gmail.com
Guest





PostPosted: Tue Jan 20, 2015 9:20 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
[quote]--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis.  There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly.  I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========



[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
jjessen01



Joined: 27 Sep 2010
Posts: 50

PostPosted: Tue Jan 20, 2015 9:37 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Inside or outside?
On Jan 20, 2015, at 9:19 AM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
[quote]I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
Quote:
--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========





[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
View user's profile Send private message
rleffler



Joined: 05 Nov 2006
Posts: 680

PostPosted: Tue Jan 20, 2015 9:57 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

John,
The navworx unit requires two antennas. One for the UAT and one for the GPS. The blade antenna they are talking about the UAT output which is similar to a transponder antenna. I wouldn't recommend locating that internally.
Bob

Sent from my iPhone

On Jan 20, 2015, at 12:35 PM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
Inside or outside?
On Jan 20, 2015, at 9:19 AM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
[quote]I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
Quote:
--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========







D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler
Back to top
View user's profile Send private message
recapen(at)earthlink.net
Guest





PostPosted: Tue Jan 20, 2015 10:18 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Any pictures?!

--


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
recapen(at)earthlink.net
Guest





PostPosted: Tue Jan 20, 2015 10:22 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

I'm planning on getting my position data from my 420W - so I shouldn't need the second GPS antenna...but that sounds like a good plan b place to put it.

--


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
jjessen01



Joined: 27 Sep 2010
Posts: 50

PostPosted: Tue Jan 20, 2015 10:22 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Ah! Ok. Thanks. I'm very interested in this topic and product, although not sure it works with Foreflight. 


On Jan 20, 2015, at 9:56 AM, Bob Leffler <rv(at)thelefflers.com (rv(at)thelefflers.com)> wrote:
[quote]John,
The navworx unit requires two antennas. One for the UAT and one for the GPS. The blade antenna they are talking about the UAT output which is similar to a transponder antenna. I wouldn't recommend locating that internally.
Bob

Sent from my iPhone

On Jan 20, 2015, at 12:35 PM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
Inside or outside?
On Jan 20, 2015, at 9:19 AM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
Quote:
I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
Quote:
--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========







D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D


[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
View user's profile Send private message
rleffler



Joined: 05 Nov 2006
Posts: 680

PostPosted: Tue Jan 20, 2015 10:37 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Nothing works with foreflight, but stratus. That's why I use wingx.

Sent from my iPhone

On Jan 20, 2015, at 1:22 PM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
Ah! Ok. Thanks. I'm very interested in this topic and product, although not sure it works with Foreflight.


On Jan 20, 2015, at 9:56 AM, Bob Leffler <rv(at)thelefflers.com (rv(at)thelefflers.com)> wrote:
[quote]John, 
The navworx unit requires two antennas. One for the UAT and one for the GPS. The blade antenna they are talking about the UAT output which is similar to a transponder antenna. I wouldn't recommend locating that internally.
Bob

Sent from my iPhone

On Jan 20, 2015, at 12:35 PM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
Inside or outside?
On Jan 20, 2015, at 9:19 AM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
Quote:
I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
Quote:
--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========







D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D




D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler
Back to top
View user's profile Send private message
rleffler



Joined: 05 Nov 2006
Posts: 680

PostPosted: Tue Jan 20, 2015 10:37 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Unfortunately that's not supported with the current navworx units. The GPS is internal to the unit.

In 2016, for experimentals you be able to do the opposite. Send GPS position data to your EFIS from navworx.

Other vendors may work differently.

Sent from my iPhone

On Jan 20, 2015, at 1:21 PM, Ralph E. Capen <recapen(at)earthlink.net> wrote:



I'm planning on getting my position data from my 420W - so I shouldn't need the second GPS antenna...but that sounds like a good plan b place to put it.

--


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Bob Leffler
N410BL - Phase I
http://mykitlog.com/rleffler
Back to top
View user's profile Send private message
jjessen01



Joined: 27 Sep 2010
Posts: 50

PostPosted: Tue Jan 20, 2015 10:58 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Yes, I'd probably have to switch over. I don't like WingX, but could get used to it, I suppose.

On Jan 20, 2015, at 10:36 AM, Bob Leffler <rv(at)thelefflers.com (rv(at)thelefflers.com)> wrote:

[quote]Nothing works with foreflight, but stratus. That's why I use wingx.

Sent from my iPhone

On Jan 20, 2015, at 1:22 PM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
Ah! Ok. Thanks. I'm very interested in this topic and product, although not sure it works with Foreflight.


On Jan 20, 2015, at 9:56 AM, Bob Leffler <rv(at)thelefflers.com (rv(at)thelefflers.com)> wrote:
Quote:
John, 
The navworx unit requires two antennas. One for the UAT and one for the GPS. The blade antenna they are talking about the UAT output which is similar to a transponder antenna. I wouldn't recommend locating that internally.
Bob

Sent from my iPhone

On Jan 20, 2015, at 12:35 PM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
Inside or outside?
On Jan 20, 2015, at 9:19 AM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
Quote:
I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
Quote:
--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis. There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly. I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
-Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========







D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D




D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
ot;">www.aeroelectric.com
books.com"">www.buildersbooks.com
quot;">www.homebuilthelp.com
quot;">www.mypilotstore.com
">www.mrrace.com
ot;">http://www.matronics.com/contribution
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
st"">http://www.matronics.com/Navigator?RV-List
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
//forums.matronics.com
D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



===================================
ctric.com
Quote:
www.buildersbooks.com
uilthelp.com

otstore.com

matronics.com/contribution
===================================
/www.matronics.com/Navigator?RV-List
===================================
cs.com
===================================


[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
View user's profile Send private message
wdleonard(at)gmail.com
Guest





PostPosted: Tue Jan 20, 2015 11:24 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

Outside lower, of course, just like a blade xpdr antenna.  Nothing special to see in a picture.  I did not use a doubler (like I did for my ship comm antenna) because the forces are relatively small the fore/aft mounting holes will not allow for twisting of the skin the way a single hole would.

My GPS antenna is top interior with a view of the sky just like the other satellite antennas.
I like my Navworx.  I have had it installed for 2 years now.  Was worth purchasing early (long before 2020).  I use it with an e-ink/lcd (pixel Qi - the more sunlight the easier to read) windows tablet (solid state hard drive, not an HHD) and Chartflier software.  
The system just needs to have audible traffic alerts from either the software or the Navworx.  Seems easy enough to do but still not available.
Dave Leonard
On Tue, Jan 20, 2015 at 9:35 AM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
[quote]Inside or outside?  
On Jan 20, 2015, at 9:19 AM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
Quote:
I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
Quote:
--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis.  There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly.  I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========







3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D


[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
Larry Bowen



Joined: 09 Jan 2006
Posts: 802
Location: NC, USA

PostPosted: Tue Jan 20, 2015 11:58 am    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

I recently switched to Garmin Pilot because I didn't want to be tied to Stratus (with Foreflight). GP has been good overall, though I have to admit Foreflight seems to set the pace of innovation when it comes to this class of apps on the ipad.

--
Larry Bowen
Larry(at)BowenAero.com
http://BowenAero.com

On Tue, Jan 20, 2015 at 2:23 PM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
[quote]Outside lower, of course, just like a blade xpdr antenna.  Nothing special to see in a picture.  I did not use a doubler (like I did for my ship comm antenna) because the forces are relatively small the fore/aft mounting holes will not allow for twisting of the skin the way a single hole would.

My GPS antenna is top interior with a view of the sky just like the other satellite antennas.
I like my Navworx.  I have had it installed for 2 years now.  Was worth purchasing early (long before 2020).  I use it with an e-ink/lcd (pixel Qi - the more sunlight the easier to read) windows tablet (solid state hard drive, not an HHD) and Chartflier software.  
The system just needs to have audible traffic alerts from either the software or the Navworx.  Seems easy enough to do but still not available.
Dave Leonard
On Tue, Jan 20, 2015 at 9:35 AM, John Jessen <n212pj(at)gmail.com (n212pj(at)gmail.com)> wrote:
Quote:
Inside or outside?  
On Jan 20, 2015, at 9:19 AM, David Leonard <wdleonard(at)gmail.com (wdleonard(at)gmail.com)> wrote:
Quote:
I put mine back in the empenage without a doubbler and have not had any noticeable issues.

Dave Leonard
On Tue, Jan 20, 2015 at 8:44 AM, Ralph E. Capen <recapen(at)earthlink.net (recapen(at)earthlink.net)> wrote:
Quote:
--> RV-List message posted by: "Ralph E. Capen" <recapen(at)earthlink.net (recapen(at)earthlink.net)>

Having purchased the NavWorx ADS600B and Delta-Pop antenna, I'm trying to figure out where to install the antenna....

Since the Delta-Pop is a blade-type antenna, it will need to be mounted along the fuselage direction of flight axis.  There are a couple of places where bulkheads mount to the bottom skin and are aligned correctly.  I'm thinking of taking advantage of one of these bulkheads instead of mounting a doubler plate to the underside.

Thoughts please?

Thanks,
Ralph
RV6A N822AR (at) N06 "Patience" 240 hrs....




===========
br> fts!)
r> > com" target="_blank">www.aeroelectric.com
w.buildersbooks.com" target="_blank">www.buildersbooks.com
p.com" target="_blank">www.homebuilthelp.com
e.com" target="_blank">www.mypilotstore.com
" target="_blank">www.mrrace.com
target="_blank">http://www.matronics.com/contribution
          -Matt Dralle, List Admin.
===========
ist" target="_blank">http://www.matronics.com/Navigator?RV-List
===========
FORUMS -
_blank">http://forums.matronics.com
===========







3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D



Quote:


_blank">www.aeroelectric.com
.com" target="_blank">www.buildersbooks.com
="_blank">www.homebuilthelp.com
="_blank">www.mypilotstore.com
ank">www.mrrace.com
_blank">http://www.matronics.com/contribution
t="_blank">http://www.matronics.com/Navigator?RV-List
tp://forums.matronics.com



[b]


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List

_________________
Larry Bowen
RV-8 SOLD,
RV-7QB in progress...
Back to top
View user's profile Send private message Visit poster's website AIM Address MSN Messenger
Tim Olson



Joined: 25 Jan 2007
Posts: 2872

PostPosted: Tue Jan 20, 2015 12:33 pm    Post subject: Delta-Pop ADS-B antenna placement Reply with quote

For what it's worth, the RV-14 (unless I missed something
in construction) doesn't use doublers for the UAT and
Transponder antennas, but it does for the 2 COM antennas.
If true, then I don't think Van's thinks you need one for
the blades. I'm still considering if I should add one,
but with the fairly low drag maybe it's not worth worrying
about it.
Tim


- The Matronics RV-List Email Forum -
 

Use the List Feature Navigator to browse the many List utilities available such as the Email Subscriptions page, Archive Search & Download, 7-Day Browse, Chat, FAQ, Photoshare, and much more:

http://www.matronics.com/Navigator?RV-List
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    Matronics Email Lists Forum Index -> RV-List All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group