Matronics Email Lists :: View topic

Matronics Email Lists
Web Forum Interface to the Matronics Email Lists

Get Email Distribution Too! FAQ Search Memberlist Usergroups Register

Profile Log in to check your private messages Log in

USB Charger

Matronics Email Lists Forum Index -> AeroElectric-List

View previous topic :: View next topic

Author Message

speedy11(at)aol.com
Guest

Posted: Sat Apr 11, 2015 7:37 pm Post subject: USB Charger

Interesting to hear the squelch issues with cig lighter outlet USB chargers.  I have two that I have used from Daytona Beach to Reno and back without any squelch issues.  It is the Energizer model  #PC-1CA.  I use one for iPad and one for Stratus.

 Stan Sutterfield

 Reno Race 84

   

  [quote][b]

nuckolls.bob(at)aeroelect
Guest

Posted: Sun Apr 12, 2015 6:28 am Post subject: USB Charger

At 22:35 2015-04-11, you wrote:

  	  Quote: 	
		   Interesting to hear the squelch issues with cig lighter outlet USB chargers.  I have two that I have used from Daytona Beach to Reno and back without any squelch issues.  It is the Energizer model  #PC-1CA.  I use one for iPad and one for Stratus.

 Stan Sutterfield

 Reno Race 84 	


   There are chargers . . . then there are CHARGERS.

   Small variances in their design and construction

   can influence where any antagonistic

   behaviors are noted. Unless the device is

   designed to suppress the full spectrum of

   input frequencies used by potential victims,

   it can emit antagonistic energies in little

   pockets located anywhere on the spectrum.

   So it's entirely possible to find devices that

   don't bother YOUR radios on the frequencies

   you use . . .while still being a nuisance

   to somebody else.



   When qualifying to DO160, and depending on

   the criticality level of that qualification,

   a device is allowed produce greater, potentially

   annoying energies outside the spectrum of 'aviation

   interests'. As you can see below, the limit lines

   for allowed emissions are reduced over frequency

   ranges where important airplane business takes place, and

   relaxed elsewhere.

 

 [img]cid:.0[/img]



   Given that no, commercial off the shelf USB power

   adapter will have been so critically evaluated, its

   possible to have one that throws tomatoes at ATC

   but not Ground Control . . . etc. etc. Even

   multiple examples of the same product may demonstrate

   different behaviors. 



 

 

   Bob . . .

26bc9ec9.jpg

Description:

Filesize:

64.79 KB

Viewed:

11777 Time(s)

jan_de_jong(at)casema.nl
Guest

Posted: Sun Apr 12, 2015 10:31 am Post subject: USB Charger

There's this:

http://www.charge4.co.uk/



Not quite for free though.

Jan de Jong

JOHN TIPTON

Joined: 17 Sep 2006
Posts: 239
Location: Torquay - England

Posted: Sun Apr 12, 2015 11:38 am Post subject: USB Charger

Yes: nice quality items, but for us this side of the pond expensive, starting at Â£99.00 that's about $150.00



John



Sent from my iPad



     ----x--O--x----



 	  Quote: 	
		   On 12 Apr 2015, at 07:30 pm, Jan de Jong <jan_de_jong(at)casema.nl> wrote:

 

 

 

 There's this:

 http://www.charge4.co.uk/

 

 Not quite for free though.

 Jan de Jong

handainc(at)madisoncounty
Guest

Posted: Mon Apr 13, 2015 7:19 am Post subject: USB Charger

And none of the panel mounts are in stock.



M. Haught



Sent from my iPad



 	  Quote: 	
		   On Apr 12, 2015, at 2:32 PM, John Tipton <jmtipton(at)btopenworld.com> wrote:

 

 

 

 Yes: nice quality items, but for us this side of the pond expensive, starting at Â£99.00 that's about $150.00

 

 John

 

 Sent from my iPad

 

     ----x--O--x----

 

> On 12 Apr 2015, at 07:30 pm, Jan de Jong <jan_de_jong(at)casema.nl> wrote:

> 

> 

> 

> There's this:

> http://www.charge4.co.uk/

> 

> Not quite for free though.

> Jan de Jong

b432291

Joined: 04 Mar 2010
Posts: 3

Posted: Mon Apr 27, 2015 6:40 am Post subject: Re: USB Charger

They now have the 4 port ~$190 US Dollars (delivered), and I ordered one of these.

Why you ask would I spend $200 on something I can get for $10 at Walmart?

Noise, noise, and noise.

I've spent thousands of dollars to have quality Comm, and the damn cig lighter chargers wipe all that out with ease. Even kills the FM radio reception.

We'll see if the unit is RF quiet like the guy claims on the website - if it is then it's money well spent.

nuckolls.bob(at)aeroelect
Guest

Posted: Mon Apr 27, 2015 6:51 am Post subject: USB Charger

At 09:40 2015-04-27, you wrote:

 	  Quote: 	
		  



They now have the 4 port ~$190 US Dollars (delivered), and I ordered 

one of these.

Why you ask would I spend $200 on something I can get for $10 at Walmart?

Noise, noise, and noise.

I've spent thousands of dollars to have quality Comm, and the damn 

cig lighter chargers wipe all that out with ease. Even kills the FM 

radio reception.

We'll see if the unit is RF quiet like the guy claims on the website 

- if it is then it's money well spent.


	


   Looking forward to your report sir. Thanks

   for sharing.



   Bob . . .

JCurtis

Joined: 08 Jun 2015
Posts: 3
Location: Cambridge, UK

Posted: Thu Jun 18, 2015 8:56 am Post subject: Re: USB Charger

Hi,



I am the designer and maker of the Charge2 and Charge4 USB chargers mentioned in this tread.  A customer let me know about the forum and suggested I register, so I have.



If anyone has questions over the units, please get in touch, I will answer the best I can.

_________________
Designer and maker of Charge2 & Charge4

handainc(at)madisoncounty
Guest

Posted: Thu Jun 18, 2015 9:18 am Post subject: USB Charger

So….you are in the UK?  I



M. Haught 

 	  Quote: 	
		   On Jun 18, 2015, at 11:56 AM, JCurtis <jeremy.curtis(at)harkwood.co.uk> wrote:

 

 

 

 Hi,

 

 I am the designer and maker of the Charge2 and Charge4 USB chargers mentioned in this tread.  A customer let me know about the forum and suggested I register, so I have.

 

 If anyone has questions over the units, please get in touch, I will answer the best I can.

 

 --------

 Designer and maker of <a href="http://www.charge4.co.uk/" target="_blank">Charge2 &amp; Charge4</a>

 

 

 

 

 Read this topic online here:

 

 http://forums.matronics.com/viewtopic.php?p=443757#443757

JCurtis

Joined: 08 Jun 2015
Posts: 3
Location: Cambridge, UK

Posted: Thu Jun 18, 2015 9:23 am Post subject: Re: USB Charger

 	  handainc(at)madisoncounty wrote: 	
		  Soï¿½.you are in the UK?  I



M. Haught 	




Yes, based in Cambridge, UK.

So given the time difference, there could be delays in replies.

_________________
Designer and maker of Charge2 & Charge4

JohnInReno

Joined: 08 Sep 2007
Posts: 150

Posted: Sun Jun 21, 2015 12:21 pm Post subject: USB Charger

Wow! The "designer and maker" of the product makes himself available to 

the list and the subject goes dead. Did I miss something?



john



On 6/18/2015 9:56 AM, JCurtis wrote:

 	  Quote: 	
		   



 Hi,



 I am the designer and maker of the Charge2 and Charge4 USB chargers mentioned in this tread.  A customer let me know about the forum and suggested I register, so I have.



 If anyone has questions over the units, please get in touch, I will answer the best I can.



 --------

 Designer and maker of <a href="http://www.charge4.co.uk/" target="_blank">Charge2 &amp; Charge4</a>





 Read this topic online here:



 http://forums.matronics.com/viewtopic.php?p=443757#443757

_________________
John Morgensen
RV-9A - Born on July 3, 2013
RV4 - for sale

JCurtis

Joined: 08 Jun 2015
Posts: 3
Location: Cambridge, UK

Posted: Sun Jun 21, 2015 12:49 pm Post subject: Re: USB Charger

 	  JohnInReno wrote: 	
		  Wow! The "designer and maker" of the product makes himself available to the list and the subject goes dead. Did I miss something?



john 	




Well, I do try and put information up on the website, but still happy to answer questions via the forum or via e-mail (address on the website). 



Jeremy.

_________________
Designer and maker of Charge2 & Charge4

JOHN TIPTON

Joined: 17 Sep 2006
Posts: 239
Location: Torquay - England

Posted: Sun Jun 21, 2015 1:04 pm Post subject: USB Charger

I think it's indicative of this list that there is a lot of fancy talk, people go on about design criteria, a lot of theorising etc etc, then someone comes along with positive advice from a professional  -  which puts everyone out on a limb because they know nothing



John



Sent from my iPad



     ----x--O--x----



 	  Quote: 	
		   On 21 Jun 2015, at 09:18 pm, John Morgensen <john(at)morgensen.com> wrote:

 

 

 

 Wow! The "designer and maker" of the product makes himself available to the list and the subject goes dead. Did I miss something?

 

 john

 

> On 6/18/2015 9:56 AM, JCurtis wrote:

> 

> 

> Hi,

> 

> I am the designer and maker of the Charge2 and Charge4 USB chargers mentioned in this tread.  A customer let me know about the forum and suggested I register, so I have.

> 

> If anyone has questions over the units, please get in touch, I will answer the best I can.

> 

> --------

> Designer and maker of <a href="http://www.charge4.co.uk/" target="_blank">Charge2 &amp; Charge4</a>

> 

> 

> 

> 

> Read this topic online here:

> 

> http://forums.matronics.com/viewtopic.php?p=443757#443757

bbradburry(at)verizon.net
Guest

Posted: Sun Jun 21, 2015 2:53 pm Post subject: USB Charger

Gee Whiz, John!



I have a bad day from time to time as well, and it sometimes results in a

post I wish I had kept to myself.  Don't worry about it.



Bill 



--

yellowduckduo(at)gmail.co
Guest

Posted: Sun Jun 21, 2015 3:02 pm Post subject: USB Charger

That is a very different impression than mine from being on this list 

for many years.

Some of us use the shared knowledge and ideas here, make our own 

hardware, learn something in the process, and share the result freely 

when it seems appropriate...

I never know whose comment might spark a useful thought or lead to a 

solution!

Ken

do not archive



On 21/06/2015 5:03 PM, John Tipton wrote:

 	  Quote: 	
		   



 I think it's indicative of this list that there is a lot of fancy talk, people go on about design criteria, a lot of theorising etc etc, then someone comes along with positive advice from a professional  -  which puts everyone out on a limb because they know nothing



 John

Display posts from previous:

	Matronics Email Lists Forum Index -> AeroElectric-List	All times are GMT - 8 Hours
Page 1 of 1

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum